Related references
Note: Only part of the references are listed.Fatigue strength assessment of ground fillet-welded joints using 4R method
Antti Ahola et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Re-evaluation of weld root fatigue strength for load-carrying fillet welded joints using the notch stress concept
Hamidreza Rohani Raftar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Fatigue strength assessment of ultra-high-strength steel fillet weld joints using 4R method
A. Ahola et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Fatigue strength of fillet-welded joints at subzero temperatures
Moritz Braun et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Ozler Karakas et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Analysis of weld root fatigue cracking in load-carrying high-strength aluminum alloy cruciform joints
Ping Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue strength assessment of TIG-dressed ultra-high-strength steel fillet weld joints using the 4R method
H. Mettanen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue strength of cruciform joints and longitudinal joints with laser-arc hybrid welding
Takeshi Hanji et al.
WELDING IN THE WORLD (2019)
Fatigue strength assessment of TIG-dressed welded steel joints by local approaches
Joerg Baumgartner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue strength capacity of load-carrying fillet welds on ultra-high-strength steel plates subjected to out-of-plane bending
A. Ahola et al.
ENGINEERING STRUCTURES (2019)
Predicting weld root notch stress intensity factors for rib-to-deck welded joint under deck loading modes
Pengjun Luo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
O. Karakas et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Fatigue assessment of steel load-carrying cruciform welded joints by means of local approaches
Wei Song et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Fatigue strength assessment of duplex and super-duplex stainless steels by 4R method
Timo Bjork et al.
WELDING IN THE WORLD (2018)
A combined critical distance and highly-stressed-volume model to evaluate the statistical size effect of the stress concentrator on low cycle fatigue of TA19 plate
Rongqiao Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue assessment of welded joints under variable amplitude loading using a novel notch stress approach
T. Nykanen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Root fatigue strength assessment of fillet welded tube-to-plate joints subjected to multi-axial stress state using stress based local methods
Mansoor Khurshid et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Application of Neuber's effective stress method for the evaluation of the fatigue behaviour of magnesium welds
Ozler Karakas
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Review and considerations on the fatigue assessment of welded joints using reference radii
Joerg Baumgartner
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Utilizing artificial neural networks for stress concentration factor calculation in butt welds
M. Dabiri et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)
Investigation on fatigue behaviour of load-carrying fillet welded joints based on mix-mode crack propagation analysis
Liang Zong et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2017)
Neural network-based assessment of the stress concentration factor in a T-welded joint
M. Dabiri et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)
A new proposal for assessment of the fatigue strength of steel butt-welded joints improved by peening (HFMI) under constant amplitude tensile loading
T. Nykanen et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Effect of welding sequence on temperature distribution, distortions, and residual stress on stiffened plates
Bai-Qiao Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Fatigue Life Evaluation of Fillet Welded Cruciform Joints with Load-Carrying Welds
S. Vishnuvardhan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Assessment of fatigue strength of steel butt-welded joints in as-welded condition - Alternative approaches for curve fitting and mean stress effect analysis
Timo Nykanen et al.
MARINE STRUCTURES (2015)
Fatigue assessment of welded joints using stress averaging and critical distance approaches
J. Baumgartner et al.
WELDING IN THE WORLD (2015)
Effect of Weld Quality and Postweld Improvement Techniques on the Fatigue Resistance of Extra High Strength Steels
H. P. Lieurade et al.
Welding in the World (2013)
IIW guideline for the assessment of weld root fatigue
Wolfgang Fricke
WELDING IN THE WORLD (2013)
Welding residual stress behavior under mechanical loading HENRY GRANJON PRIZE COMPETITION 2012 Winner Category C: Design and Structural Integrity
Majid Farajian
WELDING IN THE WORLD (2013)
Fatigue resistance of weld ends
Matthias Kaffenberger et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Evaluation of nominal and local stress based approaches for the fatigue assessment of seam welds
T. Bruder et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Fatigue strength assessment of load-carrying cruciform joints with material mismatching in low- and high-cycle fatigue regions based on the effective notch concept
Kawin Saiprasertkit et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
LOW- AND HIGH-CYCLE FATIGUE BEHAVIOUR OF LOAD-CARRYING CRUCIFORM JOINTS CONTAINING INCOMPLETE PENETRATION AND STRENGTH MISMATCH
T. Hanji et al.
WELDING IN THE WORLD (2012)
The Theory of Critical Distances to estimate lifetime of notched components subjected to variable amplitude uniaxial fatigue loading
Luca Susmel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Application of the notch stress concept to the real geometry of weld end points
M. Kaffenberger et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2011)
Fatigue analysis of friction stir welded aluminium profile using critical distance
Meysam Mahdavi Shahri et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Fatigue behaviour of welded joints from magnesium alloy (AZ31) according to the local strain concept
O. Karakas et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2010)
S-N LINES FOR WELDED THIN JOINTS - SUGGESTED SLOPES AND FAT VALUES FOR APPLYING THE NOTCH STRESS CONCEPT WITH VARIOUS REFERENCE RADII
Cetin M. Sonsino et al.
WELDING IN THE WORLD (2010)
Effect of residual stresses on the fatigue behaviour of welded joints depending on loading conditions and weld geometry
C. M. Sonsino
INTERNATIONAL JOURNAL OF FATIGUE (2009)
A CONSIDERATION OF ALLOWABLE EQUIVALENT STRESSES FOR FATIGUE DESIGN OF WELDED JOINTS ACCORDING TO THE NOTCH STRESS CONCEPT WITH THE REFERENCE RADII rref=1.00 AND 0.05 mm
C. M. Sonsino
WELDING IN THE WORLD (2009)
The theory of critical distances: a review of its applications in fatigue
Luca Susmel
ENGINEERING FRACTURE MECHANICS (2008)
A study on fatigue crack initiation point of load-carrying fillet welded cruciform joints
Shigenobu Kainuma et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Residual stresses in welded structures
R. H. Leggatt
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2008)
A fatigue strength evaluation method for load-carrying fillet welded cruciform joints
Shigenobu Kainuma et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Fatigue analysis of load-carrying fillet welds
JD Sorensen et al.
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME (2006)
Fatigue strength evaluation of load-carrying cruciform fillet-welded joints made with mild steel plates of different thickness
S Kainuma et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Fatigue life prediction of gas tungsten arc welded AISI 304L cruciform joints with different LOP sizes
PJ Singh et al.
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Prediction of fatigue failure location on a component using a critical distance method
D Taylor et al.
INTERNATIONAL JOURNAL OF FATIGUE (2000)
Predicting weld toe stress concentration factors for T and skewed T-joint plate connections
FP Brennan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2000)
Share Paper
