☆ 4.7 Article

Evaluation of cooling flow field of proton exchange membrane fuel cell based on heat transfer performance enhancement

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Review Energy & Fuels

Factors influencing the performance of PEM fuel cells: A review on performance parameters, water management, and cooling techniques

Rupinder Singh et al.

Summary: This paper discusses the critical parameters affecting the performance and lifespan of PEM fuel cells, focusing on the control of excess water content and dehydration. It summarizes the effects of these factors on various components of the fuel cell and presents active cooling strategies to remove waste heat from the stack. Additionally, it highlights the role of heat pipes, working fluid, and nanofluid in cooling PEM fuel cells.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Thermodynamics

Heat and mass transfer performance of proton exchange membrane fuel cells with electrode of anisotropic thermal conductivity

Chaoling Han et al.

Summary: This study systematically analyzed the coupling characteristics of heat transfer and catalysis in PEMFCs, and found that the anisotropy of electrode thermal conductivity in the through-plane direction has a significant impact on performance. The molar concentration distributions of liquid water and oxygen on the electrode surface vary with operational temperature, and appropriate anisotropic thermal conductivity can effectively improve PEMFC output performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Review Energy & Fuels

Effects of temperature on the performance of fuel cell hybrid electric vehicles: A review

Zhen Song et al.

Summary: Fuel cell hybrid electric vehicles, powered by both fuel cell and lithium-ion battery, have been recognized as a potential alternative to internal combustion vehicles due to their high energy density and conversion efficiency. Energy management and thermal management are critical for stable power output, and strategies integrating temperature effects are crucial for improving efficiency and service life.

APPLIED ENERGY (2021)

Add to Collection

Article Energy & Fuels

Effects of flow field on thermal management in proton exchange membrane fuel cell stacks: A numerical study

Yimeng Peng et al.

Summary: Research shows that Toyota's 3D mesh flow field can significantly enhance oxygen supply and liquid water removal, but surprisingly, it results in the worst temperature uniformity and the highest maximum temperature difference, posing a challenge to the stack reliability.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Review Environmental Sciences

Environmental aspects of fuel cells: A review

Mohammad Ali Abdelkareem et al.

Summary: Fossil fuels are the main energy supply globally but have environmental impacts, while fuel cells are efficient energy conversion devices. Fuel cells are considered more environmentally friendly and efficient than conventional energy sources, but still face operational and environmental challenges that need to be compared in context.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Review Energy & Fuels

IS Thermal management of polymer electrolyte membrane fuel cells: A review of cooling methods, material properties, and durability

Qin Chen et al.

Summary: This review summarized recent progress in thermal management of Proton Exchange Membrane (PEM) fuel cells, focusing on waste heat generation mechanisms, cooling methods, cold starts, material properties, and durability. The challenge of cooling PEM fuel cell stacks and coupling thermal and water managements is discussed, along with proposed future directions for research.

APPLIED ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Numerical analysis of static and dynamic heat transfer behaviors inside proton exchange membrane fuel cell

Qianqian Wang et al.

Summary: One-dimensional, two-phase transient proton exchange membrane fuel cell (PEMFC) thermal models consider thermal contact resistance between gas diffusion backing (GDB) and bipolar plate, and the dependence of thermal conductivity (TC) and specific heat capacity (SHC) on liquid water. Current loads have significant impact on temperature distribution, maximum temperature, transient response, and other thermal characters within the fuel cell, while the presence of liquid water affects temperature distribution due to its high TC and SHC. Sensitivity analysis indicates that improving GDB TC is crucial to avoid overheating in the cathode catalyst layer (CCL) under relatively wet conditions.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Energy & Fuels

Numerical study of a MIMO-shaped cooling plate in PEMFC stack for heat transfer enhancement

Xi Chen et al.

Summary: The study introduces a novel multi-input and multi-output (MIMO) cooling flow field design and investigates the performance of U-shaped and Z-shaped cooling flow fields with different channel configurations using computational fluid dynamics methods. The results show that the Z-shaped design provides better temperature distribution compared to the U-shaped cooling flow field, aiding in reducing the maximum temperature value.

ENERGY REPORTS (2021)

Add to Collection

Review Energy & Fuels

Recent development of hydrogen and fuel cell technologies: A review

Lixin Fan et al.

Summary: Summary: Hydrogen has emerged as a new energy vector, beyond its industrial role, to address energy security issues in developed countries. China is actively developing hydrogen infrastructure to meet sustainability goals and growing energy demand.

ENERGY REPORTS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Materials, technological status, and fundamentals of PEM fuel cells - A review

Yun Wang et al.

MATERIALS TODAY (2020)

Add to Collection

Article Thermodynamics

Investigation of current density spatial distribution in PEM fuel cells using a comprehensively validated multi-phase non-isothermal model

Guobin Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

Temperature uniformity improvement of a proton exchange membrane fuel cell stack with ultra-thin vapor chambers

Lizhong Luo et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

Experimental study on heat transfer performance of vapor chambers with potential applications in thermal management of proton exchange membrane fuel cells

Jing Zhao et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Comfort index evaluating the water and thermal characteristics of proton exchange membrane fuel cell

Renfang Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Thermodynamics

Design optimization and thermal management of the PEMFC using artificial neural networks

Hossein Pourrahmani et al.

ENERGY (2019)

Add to Collection

Review Thermodynamics

A review on the approaches applied for cooling fuel cells

Mandi Ramezanizadeh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Energy & Fuels

Three-dimensional simulation of a new cooling strategy for proton exchange membrane fuel cell stack using a non-isothermal multiphase model

Guobin Zhang et al.

APPLIED ENERGY (2019)

Add to Collection

Article Energy & Fuels

A parametric comparison of temperature uniformity and energy performance of a PEMFC having serpentine wavy channels

Yuxin Jia et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

An improved thermal control of open cathode proton exchange membrane fuel cell

Chaima Mahjoubi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Energy & Fuels

Numerical simulation based design for an innovative PEMFC cooling flow field with metallic bipolar plates

Arash Mandavi et al.

APPLIED ENERGY (2018)

Add to Collection

Review Energy & Fuels

A review on energy allocation of fuel cell/battery/ultracapacitor for hybrid electric vehicles

Venkata KoteswaraRao Kasimalla et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Add to Collection

Article Thermodynamics

Thermal investigation of a PEM fuel cell with cooling flow field

S. M. Rahgoshay et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Physical

A numerical study on thermal analysis and cooling flow fields effect on PEMFC performance

M. Ghasemi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Energy & Fuels

Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells

Ebrahim Afshari et al.

JOURNAL OF THE ENERGY INSTITUTE (2017)

Add to Collection

Article Energy & Fuels

Numerical investigation of the coupled water and thermal management in PEM fuel cell

Tao-Feng Cao et al.

APPLIED ENERGY (2013)

Add to Collection

Article Energy & Fuels

Numerical study of serpentine flow-field cooling plates on PEM fuel cells performance

Dong Hyup Jeon

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)

Add to Collection

Review Chemistry, Physical

A critical review of cooling techniques in proton exchange membrane fuel cell stacks

Guangsheng Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection

Article Thermodynamics

A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs

Seung Man Baek et al.

APPLIED THERMAL ENGINEERING (2011)

Add to Collection

Article Chemistry, Analytical

Power capability analysis in lithium ion batteries using electrochemical impedance spectroscopy

Songhun Yoon et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2011)

Add to Collection

Article Chemistry, Physical

Numerical study to examine the performance of multi-pass serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells

Seung Ho Yu et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Article Electrochemistry

Analysis of Optimal Heat Transfer in a PEM Fuel Cell Cooling Plate

F. C. Chen et al.

FUEL CELLS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.