☆ 4.7 Article

On the magnetohydrodynamic Al2O3-water nanofluid flow through parallel fins enclosed inside a partially heated hexagonal cavity

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Non-Newtonian fluid flow around a Y-shaped fin embedded in a square cavity

Zafar Hayat Khan et al.

Summary: This study numerically investigates the heat transfer characteristics of free convection of Casson fluid inside a square cavity with Y-shaped fin, demonstrating that the presence of Y-shaped fin can enhance heat transfer efficiency along the bottom surface.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Investigation of magnetohydrodynamics in Ag-TiO2/water hybrid nanofluid in a Shamse knot shaped cavity

Yuan Ma et al.

Summary: This study numerically investigates the natural convection heat transfer of hybrid nanofluid (Ag-TiO2/water) in a complex cavity named Shamse knot shape, considering the effects of magnetic field, Rayleigh number, nanoparticle volume fraction, and hollow side length. The results show that the magnetic field has a negative impact on thermal performance, while the nanoparticle volume fraction significantly influences heat transfer efficiency. This research provides insights into the fluid flow and heat transfer characteristics influenced by various parameters in a complex cavity configuration.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

Non-Darcian natural convection of a nanofluid due to triangular fins within trapezoidal enclosures partially filled with a thermal non-equilibrium porous layer

Sameh E. Ahmed

Summary: The numerical simulations investigated the convective transport due to triangular fins within an inclined trapezoidal enclosure containing a nanofluid layer and a non-Darcy porous layer. The study applied a local thermal non-equilibrium model and considered various cases based on the perimeter of the triangular fin. The results showed that the average Nusselt number increased significantly with varying Nield parameter and higher values of aspect ratio A and trapezoidal angle phi supported nanofluid activity.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

The magnetic field on a nanofluid flow within a finned cavity containing solid particles

Abdelraheem M. Aly et al.

Summary: The ISPH method is used to analyze the effects of a magnetic field on thermosolutal convection of solid particles spreading within a finned cavity. The simulations show that solid particles tend to move towards the upper part of the cavity and the fins on the upper wall play a role in adjusting the spread of the particles. The blending between solid and fluid particles is influenced by an increase in the Hartman parameter, while the Soret and Dufour numbers reduce the blending of solid particles within a nanofluid flow.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Buoyancy-driven melting and solidification heat transfer analysis in encapsulated phase change materials

Nithin Mallya et al.

Summary: The study focuses on the application of encapsulated phase change materials in thermal energy storage, with emphasis on the selection of PCM and dynamic heat transfer characteristics for energy density. The research provides a general understanding of transient heat transfer in phase change media and engineering tools for designing energy storage units.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Conjugate forced convection transient flow and heat transfer analysis in a hexagonal, partitioned, air filled cavity with dynamic modulator

Maruf Md Ikram et al.

Summary: This study focuses on the transient analysis of forced convection flow and heat transfer in a hexagonal cavity, incorporating a rotating blade and a flow modulator. Numerical results show an inverse relationship between heat transfer effectiveness and Biot and Rayleigh numbers, improving significantly with higher Reynolds number up to a critical state at Re-cr = 650. Higher Reynolds number also reduces the power spectrum of the system response.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Review Physics, Multidisciplinary

A review of flow and heat transfer in cavities and their applications

Ahmed A. Hussien et al.

Summary: This study reviews recent numerical and experimental research on heat transfer and entropy generation in cavities, discussing the impact of fluid thermal properties, cavity configuration, boundary conditions, and various physical parameters. It also explores the influence of important dimensionless parameters on natural and combined convection heat transfer mechanisms in cavities.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Add to Collection

Article Physics, Multidisciplinary

On the flow patterns and thermal control of radiative natural convective hybrid nanofluid flow inside a square enclosure having various shaped multiple heated obstacles

Nilankush Acharya

Summary: This study investigates the impact of different heated obstacle shapes on the flow patterns of hybrid nanofluid inside a square enclosure, and reveals the effects of various parameters on hydrothermal patterns through experiments and model derivations. The results show that increasing Rayleigh number enhances the isotherms, with circular obstacles exhibiting extreme distortion, while other parameters show opposite effects on isotherms.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

Add to Collection

Article Multidisciplinary Sciences

Heatline visualization of MHD natural convection heat transfer of nanofluid in a prismatic enclosure

Tarikul Islam et al.

Summary: This study numerically analyzes heat transport characteristics within a prismatic cavity filled with Cu-H2O nanofluid using the heatline method, considering different temperature boundary conditions. The results show that the heat transfer rate significantly affects thermal boundary conditions and the shape of nanoparticles, and higher Rayleigh numbers and nanoparticles volume fractions enhance the temperature transfer value significantly. Hartmann number has a positive impact on fluid flow and temperature transport.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Thermodynamics

Second law analysis of magneto-natural convection in a nanofluid filled wavy-hexagonal porous enclosure

Seyyed Masoud Seyyedi et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Insight into the dynamics of ferrohydrodynamic (FHD) and magnetohydrodynamic (MHD) nanofluids inside a hexagonal cavity in the presence of a non-uniform magnetic field

M. Ghalambaz et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Add to Collection

Article Thermodynamics

Partially heated lid-driven flow in a hexagonal cavity with inner circular obstacle via FEM

Rizwan Ul Haq et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Heat transfer analysis on buoyantly convective non-Newtonian stream in a hexagonal enclosure rooted with T-Shaped flipper: Hybrid meshed analysis

Khalil Ur Rehman et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Review Thermodynamics

Magnetohydrodynamics convection in nanofluids-filled cavities: A review

Maysam Molana et al.

HEAT TRANSFER (2020)

Add to Collection

Article Thermodynamics

MHD mixed convection in a nanofluid filled vertical lid-driven cavity having a flexible fin attached to its upper wall

Fatih Selimefendigil et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Thermodynamics

Significance of alumina in nanofluid technology An overview

K. Farhana et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Recent advances in application of nanofluids in heat transfer devices: A critical review

Muhammad Usman Sajid et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Add to Collection

Article Thermodynamics

Water functionalized CuO nanoparticles filled in a partially heated trapezoidal cavity with inner heated obstacle: FEM approach

Rizwan ul Haq et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

Exploring the Use of Alumina Nanofluid as Emergency Coolant for Nuclear Fuel Bundle

A. S. Chinchole et al.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2019)

Add to Collection

Article Engineering, Chemical

Nanofluid and porous fins effect on natural convection and entropy generation of flow inside a cavity

Majid Siavashi et al.

ADVANCED POWDER TECHNOLOGY (2018)

Add to Collection

Article Thermodynamics

Effect of fin shape on the thermal performance of nanofluid-cooled micro pin-fin heat sinks

Tehmina Ambreen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Engineering, Multidisciplinary

Thermal design of a novel heat sink cooled by natural convection with phase transition in the series loop

Chen Hao et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Effects of pin-fins geometry and nanofluid on the performance of a pin-fin miniature heat sink (PFMHS)

M. Khoshvaght-Aliabadi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Influence of external magnetic field inclination on three-dimensional buoyancy-driven convection in an open trapezoidal cavity filled with CNT-Water nanofluidx

Rajab Al-Sayegh

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Thermodynamics

Heat transfer enhancement and pressure drop of Fe3O4-water nanofluid in a double tube counter flow heat exchanger with internal longitudinal fins

Mohammad Sikindar Baba et al.

CASE STUDIES IN THERMAL ENGINEERING (2018)

Add to Collection

Article Engineering, Multidisciplinary

Numerical investigation of fluid flow and heat transfer of nanofluids in microchannel with longitudinal fins

Ayoub Abdollahi et al.

AIN SHAMS ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Multidisciplinary

Lattice Boltzmann Simulation of Natural Convection in an Annulus between a Hexagonal Cylinder and a Square Enclosure

L. El Moutaouakil et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2017)

Add to Collection

Proceedings Paper Energy & Fuels

Study of Natural Convection Passive Cooling System for Nuclear Reactors

Habibi Abdillah et al.

INTERNATIONAL CONFERENCE ON ENERGY SCIENCES (ICES 2016) (2017)

Add to Collection

Article Mechanics

Characterization of the secondary flow in hexagonal ducts

O. Marin et al.

PHYSICS OF FLUIDS (2016)

Add to Collection

Article Thermodynamics

Transient and conjugate heat and mass transfer in hexagonal ducts with adsorbent walls

Li-Zhi Zhang

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Cooling of Heat Sources by Natural Convection Heat Transfer in a Vertical Annulus

M. Sankar et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)

Add to Collection

Article Thermodynamics

Natural convection heat transfer of alumina-water nanofluid in vertical square enclosures: An experimental study

C. J. Ho et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

Add to Collection

Article Thermodynamics

Numerical study of natural convection in partially heated rectangular enclosures filled with nanofluids

Hakan F. Oztop et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2008)

Add to Collection

Article Engineering, Chemical

Influence of internal convection during microwave thawing of cylinders

T Basak et al.

AICHE JOURNAL (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.