Related references
Note: Only part of the references are listed.Determination of parameters of free volume model for Zr-based BMG via nanoindentation
Jungmoo Han et al.
INTERMETALLICS (2021)
Prediction of the settling velocity of the rod-shaped proppant in vertical fracture using artificial neural network
Zhaopeng Zhu et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)
Nanoindentation of zirconium based bulk metallic glass and its nanomechanical properties
Karuppasamy Pandian Marimuthu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Performances of regression model and artificial neural network in monitoring welding quality based on power signal
Dawei Zhao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Stratified random sampling for dependent inputs in Monte Carlo simulations from computer experiments
Anirban Mondal et al.
JOURNAL OF STATISTICAL PLANNING AND INFERENCE (2020)
Quantifying Mechanical Properties of Automotive Steels with Deep Learning Based Computer Vision Algorithms
Ehsan Javaheri et al.
METALS (2020)
Numerical study on deformation behavior of bulk metallic glass composites via modified free-volume theory
J. X. Zhao et al.
INTERMETALLICS (2020)
An energy-based method for flow property determination from a single-cycle spherical indentation test (SIT)
Tairui Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Extraction of mechanical properties of materials through deep learning from instrumented indentation
Lu Lu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)
Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data
Georgios Konstantopoulos et al.
MATERIALS & DESIGN (2020)
Performance analysis of two-stage thermoelectric generator model based on Latin hypercube sampling
Feng Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Estimating the standardized regression coefficients of design variables in daylighting and energy performance of buildings in the face of multicollinearity
Amr S. Allam et al.
SOLAR ENERGY (2020)
Prediction of uniaxial tensile flow using finite element-based indentation and optimized artificial neural networks
Kyeongjae Jeong et al.
MATERIALS & DESIGN (2020)
ANN, M5P-tree and nonlinear regression approaches with statistical evaluations to predict the compressive strength of cement-based mortar modified with fly ash
Ahmed Mohammed et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Machine learning prediction of mechanical properties of concrete: Critical review
Wassim Ben Chaabene et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Neural network modeling for anisotropic mechanical properties and work hardening behavior of Inconel 718 alloy at elevated temperatures
Gauri Mahalle et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Impact of Sampling Technique on the Performance of Surrogate Models Generated with Artificial Neural Network (ANN): A Case Study for a Natural Gas Stabilization Unit
Mohamed Ibrahim et al.
ENERGIES (2019)
Discrete random sampling: Theory and practice in machine monitoring
Mayssa Hajar et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Artificial neural network technique to predict the properties of multiwall carbon nanotube-fly ash reinforced aluminium composite
Udaya Devadiga et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Formation lithology classification using scalable gradient boosted decision trees
Vikrant A. Dev et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
Investigation of the mechanical properties of steel using instrumented indentation test with simulated annealing particle swarm optimization
L. Y. Huang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
On the effect of hydrostatic stress on plastic deformation in metallic glasses
J. X. Zhao et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)
Model updating of a historic concrete bridge by sensitivity- and global optimization-based Latin Hypercube Sampling
Rosalba Ferrari et al.
ENGINEERING STRUCTURES (2019)
Equivalent-energy indentation method to predict the tensile properties of light alloys
Hui Chen et al.
MATERIALS & DESIGN (2019)
Nanoindentation near the edge of a viscoelastic solid with a rough surface
Naoki Fujisawa et al.
MATERIALS & DESIGN (2019)
Numerical simulation on the deformation behaviors of bulk metallic glass composites under uniaxial tension and compression
Wei Rao et al.
COMPOSITE STRUCTURES (2018)
Radius and angle determination of diamond Berkovich indenter
W. J. Zong et al.
MEASUREMENT (2017)
Effects of geometric factors and shear band patterns on notch sensitivity in bulk metallic glasses
Weidong Li et al.
INTERMETALLICS (2016)
Spherical indentation method to evaluate material properties of high-strength materials
Minsoo Kim et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Hertzian load-displacement relation holds for spherical indentation on soft elastic solids undergoing large deformations
Chen-En Wu et al.
TRIBOLOGY INTERNATIONAL (2016)
Examination of Berkovich indenter tip bluntness
Jaroslav Cech et al.
MATERIALS & DESIGN (2016)
Evaluation of material properties of incompressible hyperelastic materials based on instrumented indentation of an equal-biaxial prestretched substrate
Th. Zisis et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
A dual triangular pyramidal indentation technique for material property evaluation
Minsoo Kim et al.
JOURNAL OF MATERIALS RESEARCH (2015)
An improved method to estimate Young's modulus of Zr-based BMGs accounting for pile-up during nanoindentation
Yichun Zhang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)
Effects of ion irradiation on Zr52.5Cu17.9Ni14.6Al10Ti5 (BAM-11) bulk metallic glass
Alejandro G. Perez-Bergquist et al.
INTERMETALLICS (2014)
Serrated flow behaviors of a Zr-based bulk metallic glass by nanoindentation
L. Cheng et al.
JOURNAL OF APPLIED PHYSICS (2014)
On the mechanism of deformation and failure in bulk metallic glasses
J. C. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Contact morphology and constitutive equation in evaluating tensile properties of austenitic stainless steels through instrumented spherical indentation
Young-Cheon Kim et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Interface Constraints on Shear Band Patterns in Bonded Metallic Glass Films Under Microindentation
Z. N. An et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Comparative Study of Elastoplastic Constitutive Models for Deformation of Metallic Glasses
Ming Zhao et al.
METALS (2012)
Study of mechanical deformation of Zr55Cu30Al10Ni5 bulk metallic glass through instrumented indentation
A. Rezaee-Bazzaz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A dual conical indentation technique based on FEA solutions for property evaluation
Hong Chul Hyun et al.
MECHANICS OF MATERIALS (2011)
Failure criterion for metallic glasses
Y. Chen et al.
PHILOSOPHICAL MAGAZINE (2011)
Effects of data normalization and inherent-factor on decision of optimal coagulant dosage in water treatment by artificial neural network
Guan-De Wu et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)
The equivalent axisymmetric model for Berkovich indenters in power-law hardening materials
Z. Shi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
A study on robust indentation techniques to evaluate elastic-plastic properties of metals
Jin Haeng Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Equation of state and topological transitions in amorphous solids under hydrostatic compression
Yu-zheng Guo et al.
JOURNAL OF APPLIED PHYSICS (2010)
Geometry and bluntness tip effects on elastic-plastic behaviour during nanoindentation of fused silica: experimental and FE simulation
D. Torres-Torres et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)
Transformation-mediated ductility in CuZr-based bulk metallic glasses
S. Pauly et al.
NATURE MATERIALS (2010)
On the hardness and elastic modulus of bulk metallic glass matrix composites
R. L. Narayan et al.
SCRIPTA MATERIALIA (2010)
Ta-particulate reinforced Zr-based bulk metallic glass matrix composite with tensile plasticity
Z. Zhu et al.
SCRIPTA MATERIALIA (2010)
A constitutive theory and modeling on deviation of shear band inclination angles in bulk metallic glasses
Ming Zhao et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Indentation and scratching mechanisms of a ZrCuAlNi bulk metallic glass
V. Keryvin et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Nanoindentation studies of Zr-based bulk metallic glasses
D. Drozdz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Atomistic simulations of correlations between volumetric change and shear softening in amorphous metals
Qi-Kai Li et al.
PHYSICAL REVIEW B (2007)
Elastic properties of Zr-based bulk metallic glasses studied by resonant ultrasound spectroscopy
Zhiying Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2007)
Determination of tensile properties by instrumented indentation technique: Representative stress and strain approach
Ju-Young Kim et al.
SURFACE & COATINGS TECHNOLOGY (2006)
An implicit finite element method for simulating inhomogeneous deformation and shear bands of amorphous alloys based on the free-volume model
Y. F. Gao
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2006)
ANN inverse analysis based on stochastic small-sample training set simulation
Drahomir Novak et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2006)
Molecular dynamics simulation of intrinsic and extrinsic mechanical properties of amorphous metals
Qi-Kai Li et al.
INTERMETALLICS (2006)
Atomic scale characterization of shear bands in an amorphous metal
Qi-Kai Li et al.
APPLIED PHYSICS LETTERS (2006)
A numerical approach to spherical indentation techniques for material property evaluation
H Lee et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
Elastic moduli and behaviors of metallic glasses
WH Wang
JOURNAL OF NON-CRYSTALLINE SOLIDS (2005)
A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve
YP Cao et al.
ACTA MATERIALIA (2004)
Difference in compressive and tensile fracture mechanisms of Zr59CU20Al10Ni8Ti3 bulk metallic glass
ZF Zhang et al.
ACTA MATERIALIA (2003)
A nanoindentation study of serrated flow in bulk metallic glasses
CA Schuh et al.
ACTA MATERIALIA (2003)
Inhomogeneous deformation in metallic glasses
R Huang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Share Paper
