Journal
INTERMETALLICS
Volume 142, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.intermet.2022.107468
Keywords
TiAl alloy; Ni-based superalloy; Amorphous filler; Microstructure; Shear strength
Categories
Funding
- GF Basic Research Project [JCKY2020205C002]
- Research Fund Project of National Engi-neering Research Center of Near-net-shape Forming Technology for Metallic Materials [2016005]
Ask authors/readers for more resources
A novel Ti-Zr-Cu-Ni amorphous filler metal was successfully fabricated and applied to vacuum brazing of TiAl alloy and Ni-based superalloy. The interfacial microstructure and mechanical properties of the brazed joints were analyzed. The results showed that brazing temperature had significant effects on element diffusion, microstructure evolution, and metallurgical quality of the joints. The thickness of certain layers in the joints was not affected by brazing temperature. The obtained joints exhibited excellent shear strength at room temperature and elevated temperature.
In this study, a novel Ti-Zr-Cu-Ni amorphous filler metal was fabricated and applied to vacuum brazing of TiAl alloy and Ni-based superalloy (GH536). The effects of brazing temperature on the interfacial microstructure and mechanical properties of the joints were analyzed. Three different regions, the isothermal solidification layer I, continuous reaction layer II and continuous diffusion layer III, were formed in the joints after brazing. The SEM and EDS results show that brazing temperature plays an important role in element diffusion, microstructure evolution and metallurgical quality of brazed joints, while the thickness of layer II and III was basically not affected by brazing temperature. The obtained joints showed excellent shear strength both at room temperature and elevated temperature. With the increase of brazing temperature, the shear strength of joints at room temperature firstly increased and then decreased. The optimal shear strength of 279 MPa was obtained after brazing at 1100 ? for 10 min. With the increase of test temperature, the shear strength of joints obtained at 1110 ?/10 min firstly decreased, then increased, and decreased again, with the maximum value of 156 MPa at 600 ?. The shear fracture mainly occurred in the thinnest layer II and the fracture morphology exhibited typical cleavage fracture characteristics.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available