Related references
Note: Only part of the references are listed.Improving ablation properties of liquid silicone rubber composites by in situ construction of rich-porous char layer
Liwei Yan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Decomposition of carbon/phenolic composites for aerospace heatshields: Detailed speciation of phenolic resin pyrolysis products
Francisco Torres-Herrador et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2021)
Facile fabrication of lightweight mullite fiber/phenolic ablator with low thermal conductivity via ambient pressure impregnation
Xianfeng Jia et al.
CERAMICS INTERNATIONAL (2021)
A comparison of ablative resistance properties of liquid silicone rubber composites filled with different fibers
Hao Zhang et al.
POLYMER ENGINEERING AND SCIENCE (2021)
The effect of CuI-PbI2 nanocomposite fabricated by the sonochemical route on electrochemical hydrogen storage characteristics
Maryam Karami et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Ablation Response Behavior under Different Heat Flux Environments for Liquid Silicone Rubber Composites
Liwei Yan et al.
ACS APPLIED POLYMER MATERIALS (2021)
Eco-friendly green synthesis of ZnO/GQD nanocomposites using Protoparmeliopsis muralis extract for their antibacterial and antibiofilm activity
Somaye Rashki et al.
JOURNAL OF MOLECULAR LIQUIDS (2021)
Improved Performances of SiBCN Powders Modified Phenolic Resins-Carbon Fiber Composites
Wenjie Yuan et al.
PROCESSES (2021)
Effects of zirconium carbide content on thermal stability and ablation properties of carbon/phenolic composites
Shuang Wang et al.
CERAMICS INTERNATIONAL (2020)
Tuning anisotropic thermal conductivity of unidirectional carbon/carbon composites by incorporating carbonaceous fillers
Guanming Yuan et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Molecular Structure Control in Mesophase Pitch via Co-Carbonization of Coal Tar Pitch and Petroleum Pitch for Production of Carbon Fibers with Both High Mechanical Properties and Thermal Conductivity
Jianguang Guo et al.
ENERGY & FUELS (2020)
Effect of TaSi2/ZrSi2 on ablation properties of carbon-phenolic composite irradiated by high-intensity continuous laser
Feng Xu et al.
CERAMICS INTERNATIONAL (2020)
Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface
Liuyang Duan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of Boron Nitride Addition on Ablation Characteristics of Carbon Fiber Reinforced Resorcinol Formaldehyde Composites
Alex Daniel et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Polymerization kinetics and control of the components of a mesophase pitch
Zheng-wu Liang et al.
NEW CARBON MATERIALS (2020)
Green Synthesis of S- and N-Codoped Carbon Nanospheres and Application as Adsorbent of Pb (II) from Aqueous Solution
Nadia Hussain et al.
INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2020)
A high heating rate pyrolysis model for the Phenolic Impregnated Carbon Ablator (PICA) based on mass spectroscopy experiments
Francisco Torres-Herrador et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)
Phenolic resin/polyhedral oligomeric silsesquioxane (POSS) composites: Mechanical, ablative, thermal, and flame retardant properties
Yubing Dong et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Manufacturing, thermochemical characterization and ablative performance evaluation of carbon-phenolic ablative material with nano-Al2O3 addition
L. Paglia et al.
POLYMER DEGRADATION AND STABILITY (2019)
Ablation behavior of boron-modified phenolic resin irradiated by high-energy continuous-wave laser and its evolution of carbon structure
Chen Ma et al.
MATERIALS & DESIGN (2019)
Improved high-temperature mechanical property of carbon-phenolic composites by introducing titanium diboride particles
Jie Ding et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of Liquid Crystalline Texture of Mesophase Pitches on the Structure and Property of Large-Diameter Carbon Fibers
Guanming Yuan et al.
ACS OMEGA (2019)
Low density ablative materials modified by nanoparticles addition: Manufacturing and characterization
G. Pulci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Extraordinary improvement of ablation resistance of carbon/phenolic composites reinforced with low loading of graphene oxide
Yuanyuan Ma et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Mesophase pitch based carbon foams as sound absorbers
Nansha Gao et al.
MATERIALS LETTERS (2018)
Catalytic graphitization behavior of phenolic resins by addition of in situ formed nano-Fe particles
H. Rastegar et al.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2018)
Effects of polycarbosilane interface on oxidation, mechanical, and ablation properties of carbon fiber-reinforced composites
Liuyang Duan et al.
CERAMICS INTERNATIONAL (2018)
Thermal stability and ablation resistance, and ablation mechanism of carbon-phenolic composites with different zirconium silicide particle loadings
Jie Ding et al.
COMPOSITES PART B-ENGINEERING (2018)
Hydrothermal Preparation of Silver Doping Zinc Oxide Nanoparticles: Studys, Characterization and Photocatalytic Activity
Hassan A. Habeeb Alshamsi et al.
ORIENTAL JOURNAL OF CHEMISTRY (2018)
Decomposition of Phenolic Impregnated Carbon Ablator (PICA) as a Function of Temperature and Heating Rate
Brody K. Bessire et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Unusual flexibility of mesophase pitch-derived carbon materials: An approach to the synthesis of graphene
D. Barreda et al.
CARBON (2017)
Evaluation of the anisotropic radiative conductivity of a low-density carbon fiber material from realistic microscale imaging
Nima Nouri et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Experimental investigation of ablation and pyrolysis processes of carbon-phenolic ablators in atmospheric entry plasmas
Bernd Helber et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Detailed analysis of species production from the pyrolysis of the Phenolic Impregnated Carbon Ablator
Hsi-Wu Wong et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)
Synthesis and characterization of high-softening-point methylene-bridged pitches by visible light irradiation assisted free-radical bromination
Chuanzhang Ge et al.
CARBON (2015)
Enhanced thermal resistance of GO/C/phenolic nanocomposite by introducing ZrB2 nanoparticles
Zahra Amirsardari et al.
COMPOSITES PART B-ENGINEERING (2015)
Improved ablation resistance of carbon-phenolic composites by introducing zirconium suicide particles
Jie Ding et al.
COMPOSITES PART B-ENGINEERING (2015)
Improvement of ablation resistance of phenolic composites reinforced with low concentrations of carbon nanotubes
Sang Hyuk Yum et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Pyrolysis behavior of graphene/phenolic resin composites
Gui-rong Huang et al.
CARBON (2015)
Effects of carbon nanotubes and carbon fiber reinforcements on thermal conductivity and ablation properties of carbon/phenolic composites
Joung-Man Park et al.
COMPOSITES PART B-ENGINEERING (2014)
Effect of zirconia on ablation mechanism of asbestos fiber/phenolic composites in oxyacetylene torch environment
Mir Asad Mirzapour et al.
CERAMICS INTERNATIONAL (2013)
Improved ablation resistance of carbon-phenolic composites by introducing zirconium diboride particles
Yaxi Chen et al.
COMPOSITES PART B-ENGINEERING (2013)
Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites
I. Srikanth et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Novel phenolic impregnated 3-D Fine-woven pierced carbon fabric composites: Microstructure and ablation behavior
Changqing Hong et al.
COMPOSITES PART B-ENGINEERING (2012)
The pyrolysis mechanism of phenol formaldehyde resin
Haiyun Jiang et al.
POLYMER DEGRADATION AND STABILITY (2012)
Pyrolysis kinetics of phenol-formaldehyde resin by non-isothermal thermogravimetry
Haiyun Jiang et al.
CARBON (2010)
Carbon-phenolic ablative materials for re-entry space vehicles: Manufacturing and properties
G. Pulci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Facile synthesis of mesophase pitch/exfoliated graphite nanoplatelets nanocomposite and its application as anode materials for lithium-ion batteries
Yi-Shuang Yang et al.
JOURNAL OF SOLID STATE CHEMISTRY (2010)
Ablation and Thermal Response Property Model Validation for Phenolic Impregnated Carbon Ablator
F. S. Milos et al.
JOURNAL OF SPACECRAFT AND ROCKETS (2010)
Nano silica modified carbon-phenolic composites for enhanced ablation resistance
I. Srikanth et al.
SCRIPTA MATERIALIA (2010)
Carbon foams with high compressive strength derived from mixtures of mesocarbon microbeads and mesophase pitch
Sizhong Li et al.
CARBON (2007)
Analysis of oxidative stabilization of mesophase pitch matrix in carbon-carbon composites, with respect to oxygen permeability and crosslinking
Sreedevi Upadhyayula et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Theoretical consideration of the effect of porosity on thermal conductivity of porous materials
Iwan Sumirat et al.
JOURNAL OF POROUS MATERIALS (2006)
A comparison of the interfacial, thermal, and ablative properties between spun and filament yarn type carbon fabric/phenolic composites
JK Park et al.
CARBON (2004)
Thermophysical properties of carbon/carbon composites and physical mechanism of thermal expansion and thermal conductivity
RY Luo et al.
CARBON (2004)
Thermal and ablative properties of low temperature carbon fiber-phenol formaldehyde resin composites
JK Park et al.
CARBON (2002)
Large diameter carbon fibres from mesophase pitch
SL Lu et al.
CARBON (2002)
Chemical, microstructural and thermal analyses of a naphthalene-derived mesophase pitch
M Dumont et al.
CARBON (2002)
Microstructural changes of phenolic resin during pyrolysis
TH Ko et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
Characterisation of coal tar pitches by thermal analysis, infrared spectroscopy and solvent fractionation
J Alcaniz-Monge et al.
FUEL (2001)