4.7 Article

A novel lithium phosphate production method by stripping of lithium from the lithium enolate in kerosene using orthophosphoric acid

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Leaching of lepidolite and recovery of lithium hydroxide from purified alkaline pressure leach liquor by phosphate precipitation and lime addition

James Mulwanda et al.

Summary: The study found that adjusting the concentration of NaOH, temperature, and stirring rate are crucial for improving the efficiency of lithium extraction from lepidolite. The addition of Ca(OH)2 aids in lithium leaching and reduces the concentrations of silicate and fluoride by forming solid phases. Under optimal conditions, most of the lithium can be recovered through precipitation and conversion, allowing for the recycling of NaOH.

HYDROMETALLURGY (2021)

Article Chemistry, Physical

Extraction of lithium from salt lake brines by granulated adsorbents

Qinglong Luo et al.

Summary: Hierarchical meso- and macro-porosity enhance the adsorption capacity of lithium adsorbents, while granulation of powder lithium adsorbents improves their applicability. Granulated lithium adsorbents consisting of Li-Al-LDHs and NH4Al3(SO4)(2)(OH)(6) via crosslinking sodium alginate were successfully prepared and evaluated for adsorption-desorption performance. The granulated lithium adsorbents showed potential for industrial application, with a lithium adsorption capacity of 9.66 mg/g and fitting well with the Langmuir model for adsorption isotherm.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Metallurgy & Metallurgical Engineering

Separation of lithium and transition metals from the leachate of spent lithium-ion battery by extraction-precipitation with p-tert-butylphenoxy acetic acid

Jinqing Chen et al.

Summary: A novel extraction-precipitation process utilizing POAA for the separation of Li and transition metals has been developed, showing high efficiency and recyclability. By optimizing conditions, efficient separation of Li and transition metals was achieved in this study.

HYDROMETALLURGY (2021)

Article Chemistry, Physical

Separation of lithium from alkaline solutions with hydrophobic deep eutectic solvents based on β-diketone

Licheng Zhang et al.

Summary: This study proposed a series of beta-diketone based DES composed of benzoyl trifluoroacetone as a hydrogen donor and compounds with different functional groups as hydrogen acceptors, which showed higher lithium capacity compared to traditional solvents. TRPO and HBTA at a specific ratio exhibited the best lithium extraction efficiency and separation effect. The stoichiometry of the complex was determined by single crystal X-ray diffraction, and the DES maintained stable extraction ability after multiple cycles.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Review Green & Sustainable Science & Technology

Lithium extraction from water lithium resources through green electrochemical-battery approaches: A comprehensive review

Ye Zhang et al.

Summary: The growing market demand for lithium, especially for applications like lithium-ion batteries, highlights the importance of lithium production. Extraction of lithium from water resources, particularly those with high Mg/Li ratios, is becoming more popular due to its low cost and abundant reserves. Among various aqueous lithium-extraction methods, the electrochemical-battery approach is considered the most promising due to its excellent lithium selectivity, high insertion capacity, low energy consumption, high reversibility, and eco-friendliness. Future research should focus on enhancing battery-system stability, process optimization, and reducing operating costs.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Chemical

Selective separation of lithium from the high magnesium brine by the extraction system containing phosphate-based ionic liquids

Ruibing Bai et al.

Summary: A novel solvent extraction system was developed to reduce the difficulty of lithium extraction from salt lake brines with high Mg/Li ratio, achieving 61% Li+ extraction efficiency and 90% Li+ stripping ratio under optimal conditions. Mechanisms of lithium extraction and stripping were proposed based on experimental results, FT-IR analysis, and UV analysis, showing promising performance in selective extraction and easy stripping.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Recent advances in magnesium/lithium separation and lithium extraction technologies from salt lake brine

Ying Sun et al.

Summary: In recent years, there has been extensive research on technologies for extracting and separating magnesium/lithium from salt lake brines, including adsorption, membrane, electrochemical, and reaction-coupled methods. While various methods have different characteristics and adaptabilities, membrane methods have attracted attention due to their low energy consumption and high separation rates.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Materials Science, Ceramics

Room temperature synthesis and phase transformation of lithium phosphate Li3PO4 as solid electrolyte

Norikazu Ishigaki et al.

Summary: The study successfully synthesized single-phase samples of low-temperature beta-type and high-temperature gamma-type lithium phosphate. The structural transformation from beta- to gamma-type phase was examined using XRD measurements, confirming continuous phase changes within a temperature range.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Article Engineering, Chemical

Mechanism study on the synergistic effect and emulsification formation of phosphine oxide with β-diketone for lithium extraction from alkaline systems

Jian Zhang et al.

Summary: The synergistic mechanism of beta-diketone and phosphine oxide in lithium extraction has been studied intensively, revealing that the presence of one molar water in the extracted species can help mitigate emulsification formation and improve lithium selectivity.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Review Materials Science, Multidisciplinary

Recent developments in energy storage systems for marine environment

Jaya Verma et al.

Summary: Marine batteries are specifically designed for marine vehicles to withstand vibration and impact, and this paper reviews various energy storage systems utilized in marine environments. Key technological developments and challenges are discussed, along with a comparison of different battery types in terms of performance metrics. Market trends and future directions for marine energy storage systems are also highlighted.

MATERIALS ADVANCES (2021)

Article Metallurgy & Metallurgical Engineering

Recovery of lithium from alkaline brine by solvent extraction with β-diketone

Licheng Zhang et al.

HYDROMETALLURGY (2018)

Article Green & Sustainable Science & Technology

Mixer-settler system for the recovery of copper and zinc from MSWI fly ash leachates: An evaluation of a hydrometallurgical process

Jinfeng Tang et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Engineering, Chemical

Selective extraction of lithium from alkaline brine using HBTA-TOPO synergistic extraction system

Licheng Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Engineering, Chemical

Solvent extraction of lithium from aqueous solution using non-fluorinated functionalized ionic liquids as extraction agents

Chenglong Shi et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Review Biotechnology & Applied Microbiology

Separation and purification of lithium by solvent extraction and supported liquid membrane, analysis of their mechanism: a review

Basudev Swain

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2016)

Article Engineering, Chemical

Study on extraction of lithium from salt lake brine by membrane electrolysis

Xuheng Liu et al.

DESALINATION (2015)

Article Metallurgy & Metallurgical Engineering

Separation of lithium from sodium in chloride solutions using SSX systems with LIX 54 and Cyanex 923

Yoko Pranolo et al.

HYDROMETALLURGY (2015)

Article Chemistry, Multidisciplinary

Profex: a graphical user interface for the Rietveld refinement program BGMN

Nicola Doebelin et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)

Article Engineering, Chemical

On precipitated calcium and magnesium phosphates during synthetic hard waters softening by monosodium phosphate

A. S. Manzola et al.

DESALINATION AND WATER TREATMENT (2014)

Article Engineering, Chemical

Hydrodynamic characterization of mixer-settlers

Fatemeh Saadat Gharehbagh et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2009)