Journal
GEOFLUIDS
Volume 2022, Issue -, Pages -Publisher
WILEY-HINDAWI
DOI: 10.1155/2022/9275688
Keywords
-
Categories
Funding
- National Natural Science Foundation of China [52076032]
- National Key Research and Development Project [2019YFC0312304]
- Fundamental Research Funds for the Central Universities [DUT21LAB121]
Ask authors/readers for more resources
Wettability at the mineral-CO2 interface is an important parameter for carbon geosequestration, but previous studies have yielded inconsistent results. This study investigates the adhesion characteristics of CO2 on a mica surface under various conditions by analyzing static and dynamic contact angles. The results show that the contact angle is affected by salinity, but not by pressure. A concentric probe is used to study the effect of surface heterogeneity on the contact angle. It is found that the measurement position of the contact angle affects the results, and large hysteresis is observed, indicating adhesion. Electron microscope tests confirm the correlation between the hysteresis and smoother surfaces. This study provides valuable data on the wettability of mica and contributes to our understanding of CO2 adhesion during sequestration.
Wettability at mineral-CO2 interface in CGS (carbon geosequestration) is a key parameter for risk assessments and storage capacity estimations. Many studies of wettability achieved inconsistent results, while adhesion could be a potential mechanism causing huge wettability alteration. CO2 adhesion characteristics have been revealed for CO2/brine/mica system under a wide range of pressures, temperatures, and salinities by analyzing static and dynamic contact angles. Under all experiment conditions, the average static CA ranges from 19.5 degrees to 32.1 degrees. In 8 MPa experiments, CA decreases from 26.0 degrees to 19.5 degrees with the increasing salinity. Similar trends were also observed under 12 MPa condition. However, CA does not show clear dependence on pressure. A concentric probe was designed by which vertical position of the probe can be changed by rotating the screw of the probe holder while horizontal degrees of freedom are restricted. With this concentric probe, contact angles were obtained at different positions of the same sample to investigate the effect of heterogeneity of sample surface. Uncertainty and large hysteresis of dynamic contact angles were found which related with measurement positions. These large hystereses as obvious sign of adhesion had good repeatability at specific surface positions. Further electron microscope test demonstrated the correlation between large hysteresis and smoother surfaces which is consistent with the DLVO theory-based water film thickness hypothesis on adhesion. This study enriched the data on the wettability of mica and may shed light on CO2 adhesion on solid surfaces for better understanding the fate of CO2 during sequestration.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available