Related references
Note: Only part of the references are listed.Effect of Magnesium Oxide and the Testing Rate on the Viscosity and Adhesion Properties of Epoxidized Natural Rubber/Acrylonitrile-Butadiene Rubber Blend Based Adhesives
B. T. Poh et al.
JOURNAL OF ADHESION (2016)
Characterization and application of propylene grafted hydrogenated dicyclopentadiene hydrocarbon resin
Jun-Hyo Park et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Optimization of SIS-based hot-melt pressure-sensitive adhesives for transdermal delivery of hydrophilic drugs
Zhongfu Zhao et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Effect of zinc oxide and testing rate on the adhesion property of styrene-butadiene rubber/standard Malaysian rubber blend adhesives
Beng Teik Poh et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)
Adhesion properties of benzoyl peroxide crosslinked epoxidized natural rubber (ENR 25)-based pressure-sensitive adhesives
B. T. Poh et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2016)
Effect of Blend Ratio and Testing Rate on the Adhesion Properties of Epoxidized Natural Rubber (ENR 25)/Styrene-Butadiene Rubber (SBR) Blend Adhesive
B. T. Poh et al.
JOURNAL OF ADHESION (2015)
Effect of N-isopropyl-N-phenyl-p-phenylenediamine antioxidant on the adhesion properties of (zinc oxide)-filled (epoxidized natural rubber 25)-based pressure-sensitive adhesives
Muhammad Kamal Zokronain et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2015)
Fabrication of pH sensitive amphiphilic hot-melt pressure sensitive adhesives for transdermal drug delivery system
Xiao Tong et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Release of a cohesively strong, general purpose hot-melt pressure sensitive adhesive from a silicone liner
Ahmed F. Moustafa
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Viscoelastic and adhesive properties of polystyrene-hydrogenated (3,4-polyisoprene and 1,4-polyisoprene)-polystyrene and polymethyl methacrylate-polybutyl acrylate-polymethyl methacrylate-based HMPSA
Pusheng Guo et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)
Preparation and characterization of polarity-modulated SIS-based hot-melt pressure-sensitive adhesives
Zhongfu Zhao et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)
Evaluation of natural rubber latex-based PSAs containing aliphatic hydrocarbon tackifier dispersions with different softening points-Adhesive properties at different conditions
P. Rajesh Raja et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Development of hot-melt pressuresensitive adhesives for transdermal drug delivery
Zhong-fu Zhao et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
Temperature dependence of tack and pulse NMR analysis of polystyrene block copolymer/tackifier system
Kazuhiro Yamamura et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
Material Properties and Statistical Analysis of Natural Rubber-Based Adhesives
Imran Khan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2013)
Synthesis of SIS-based hot-melt pressure sensitive adhesives for transdermal delivery of hydrophilic drugs
Qing Wang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Composition and Performance of Styrene-Isoprene-Styrene (SIS) and Styrene-Butadiene-Styrene (SBS) Hot Melt Pressure Sensitive Adhesives
Schana Andreia da Silva et al.
JOURNAL OF ADHESION (2012)
Thermal properties and adhesion strength of amorphous poly(a-olefins)/styrene-ethylene-butylene copolymer/terpene hot-melt adhesive
Jae-Ho Kim et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Adhesion behavior of natural rubber-based adhesives crosslinked by benzoyl peroxide
B. T. Poh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
The role of tackifiers on the auto-adhesion behavior of EPDM rubber
Ganesh C. Basak et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Material Properties and Influence of Molecular Weight and Testing Rate on Adhesion Properties of Epoxidized Natural Rubber-Based Adhesives
Imran Khan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
Effect of Temperature on Probe Tack Adhesion: Extension of the Dahlquist Criterion of Tack
Boris E. Gdalin et al.
JOURNAL OF ADHESION (2011)
Effects of Compatibility Between Tackifier and Polymer on Adhesion Property and Phase Structure: Tackifier-Added Polystyrene-Based Triblock/Diblock Copolymer Blend System
Yoshinobu Nakamura et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Natural Rubber-Based Pressure-Sensitive Adhesives: A Review
Imran Khan et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2011)
Effect of molecular weight and testing rate on adhesion property of pressure-sensitive adhesives prepared from epoxidized natural rubber
Imran Khan et al.
MATERIALS & DESIGN (2011)
Surface Property and Compatibility of Poly(styrene-isoprene-styrene) Triblock Copolymer/Tackifier Blend System
Youichiro Sakaguchi et al.
JOURNAL OF ADHESION (2010)
Effect of Silica on Viscosity, Tack, and Shear Strength of Epoxidized Natural Rubber-Based Pressure-Sensitive Adhesives in the Presence of Coumarone-Indene Resin
Imran Khan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Effect of Molecular Weight of Epoxidized-Natural Rubber on Viscosity and Tack of Pressure-Sensitive Adhesives
B. T. Poh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Effect of Hybrid Tackifiers on Adhesion Properties of Epoxidized Natural Rubber-Based Pressure-Sensitive Adhesives
B. T. Poh et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Photoinitiator grafted styrene-butadiene-styrene triblock copolymer
Guoliang Wu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Dependence of Peel Adhesion on Molecular Weight of Epoxidized Natural Rubber
B. T. Poh et al.
JOURNAL OF ADHESION (2009)
The Use of Compatible Blend of Styrene-Vinylacetate Copolymer/Natural Rubber Latex in Pressure-Sensitive Adhesive Applications by Using Irradiation and Chemical Initiation
M. M. Magida et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Dependence of adhesion properties of SMR L based adhesive on molecular weight of rubber
B. T. Poh et al.
PLASTICS RUBBER AND COMPOSITES (2009)
Adhesion property of epoxidized natural rubber (ENR)-based adhesives containing calcium carbonate
B. T. Poh et al.
EXPRESS POLYMER LETTERS (2008)
The effect of tackifier on phase structure and peel adhesion of a triblock copolymer pressure-sensitive adhesive
Mariko Sasaki et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2008)
Stress relaxation during bond formation and adhesion of pressure-sensitive adhesives
Mikhail B. Novikov et al.
JOURNAL OF ADHESION (2008)
Compatibility and viscoelastic properties of brominated isobutylene-co-p-methylstyrene rubber/tackifier blends
K. Dinesh Kumar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
A new approach on the thermal stability of SDS copolymer for HMPSA, Part I: Oxidation kinetics for the whole process
Junying Zhang et al.
POLYMER DEGRADATION AND STABILITY (2008)
Epoxidation of styrene-isoprene-styrene block copolymer and its use for hot-melt pressure sensitive adhesives
Hongqiang Li et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)
Nano- and bulk-tack adhesive properties of stimuli-responsive, fullerene-polymer blends, containing polystyrene-block-polybutadiene-block-polystyrene and polystyrene-block-polyisoprene-block-polystyrene rubber-based adhesives
J. Paige Phillips et al.
POLYMER (2007)
Adhesion properties of styrene-butadiene rubber (SBR)/Standard Malaysian Rubber (SMR L)-based adhesives in the presence of phenol formaldehyde resin
B. T. Poh et al.
EXPRESS POLYMER LETTERS (2007)
Peel and shear strength of pressure-sensitive adhesives prepared from epoxidized natural rubber
B. T. Poh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
PSA performances and viscoelastic properties of SIS-based PSA blends with H-DCPD tackifiers
Dong-Hyuk Lim et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Rheology and adherence of pressure-sensitive adhesives
G Marin et al.
JOURNAL OF ADHESION (2006)
Adhesive and rheological properties of lightly crosslinked model acrylic networks
A Lindner et al.
JOURNAL OF ADHESION (2006)
Tack and fracture energy of tackified SIS (styrene-isoprene-styrene)-based hot-melt pressure sensitive adhesives (HMPSAs)
Dae-Jun Kim et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2006)
Effect of substrate and tackifier on peel strength of SIS (styrene-isoprene-styrene)-based HMPSAs
DJ Kim et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2005)
Rheological properties of hot melt pressure sensitive adhesives (HMPSAs) based on styrene-isoprene copolymers, part 3: Rheological behavior of different block copolymers with high diblock content
MN Cazenave et al.
JOURNAL OF ADHESION (2005)
Comparison of styrene with methyl methacrylate copolymers on the adhesive performance and peeling master curves of acrylate pressure sensitive adhesives
MD Gower et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2005)
Linear viscoelasticity and non-linear elasticity of block copolymer blends used as soft adhesives
A Roos et al.
MACROMOLECULAR SYMPOSIA (2004)
The effect of molecular weight and temperature on tack properties of model polyisobutylenes
AE O'Connor et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2004)
Rheological properties of Hot-melt pressure-sensitive adhesives (HMPSAS) based on styrene-isoprene copolymers. Part 2: Innovative molecular design from predictive formulation
C Derail et al.
JOURNAL OF ADHESION (2004)
Influence of surface and bulk structures of acrylic PSA films onto their tack properties
A Aymonier et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)
Rheological properties of hot melt pressure-sensitive adhesives based on styrene-isoprene copolymers. Part 1: A rheological model for [SIS-SI] formulations
FX Gibert et al.
JOURNAL OF ADHESION (2003)
The viscoelastic properties of natural rubber pressure-sensitive adhesive using acrylic resin as a tackifier
YC Leong et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Melt versus solvent coating: Structure and properties of block-copolymer-based pressure-sensitive adhesives
AE O'Connor et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Adhesion properties of UV crosslinked polystyrene-block-polybutadiene-block-polystyrene copolymer and tackifier mixture
JK Kim et al.
POLYMER (2002)
Surface investigation of adhesive formulation consisting of UV sensitive triblock poly(styrene-b-butadiene-b-styrene) copolymer
M Staeger et al.
APPLIED SURFACE SCIENCE (2002)
Bulk and interfacial contributions to the debonding mechanisms of soft adhesives: Extension to large strains
C Creton et al.
LANGMUIR (2001)
The aromatic hydrocarbon resins with various hydrogenation degrees Part 2. The adhesion and viscoelastic properties of the mixtures of resins and block copolymers
DY Ryu et al.
POLYMER (2000)
The aromatic hydrocarbon resins with various hydrogenation degrees Part 1. The phase behavior and miscibility with polybutadiene and with polystyrene
JK Kim et al.
POLYMER (2000)
Phase behavior and pressure sensitive adhesive properties in blends of poly(styrene-b-isoprene-b-styrene) with tackifier resin
S Akiyama et al.
POLYMER (2000)
Share Paper
