Related references
Note: Only part of the references are listed.Surrogate models of thermally cracked hydrocarbon fuels at typical pyrolysis temperatures
Dingrui Zhang et al.
FUEL (2021)
Flow and Mass Transfer of Pyrolytic Aviation Kerosene in Curved Channel
Keyu Gong et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2021)
Numerical study on supercritical heat transfer of n-decane during pyrolysis in rectangular tubes
Zhiliang Lei et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal Cracking and Heat Transfer of Hydrocarbon Fuels at Supercritical Pressures in Vertical Tubes
Peixue Jiang et al.
HEAT TRANSFER ENGINEERING (2019)
Kinetics and modeling of supercritical pyrolysis of endothermic hydrocarbon fuels in regenerative cooling channels
Zaizheng Li et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Effect of geometry parameters on the hydrocarbon fuel flow rate distribution in pyrolysis zone of SCRamjet cooling channels
Yuguang Jiang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
The flow rate distribution of hydrocarbon fuel in parallel channels with different cross section shapes
Yuguang Jiang et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal oxidation coking of aviation kerosene RP-3 at supercritical pressure in helical tubes
Yanchen Fu et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental Investigation of Flow Coking and Coke Deposition of Supercritical Hydrocarbon Fuels in Porous Media
Yinhai Zhu et al.
ENERGY & FUELS (2018)
Thermal Cracking of Endothermic Hydrocarbon Fuel in Regenerative Cooling Channels with Different Geometric Structures
Fuqiang Li et al.
ENERGY & FUELS (2018)
Conjugate heat transfer, endothermic fuel pyrolysis and surface coking of aviation kerosene in ribbed tube at supercritical pressure
Keke Xu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Investigations on the thermal cracking and pyrolysis mechanism of China No.3 aviation kerosene under supercritical conditions
Tianhao Zhang et al.
PETROLEUM SCIENCE AND TECHNOLOGY (2018)
Flow and thermal analyses of supercritical hydrocarbon fuel in curved regenerative cooling channel around cavity in rocket based combined cycle engine
Tingting Jing et al.
APPLIED THERMAL ENGINEERING (2018)
Supercritical-Pressure Heat Transfer, Pyrolytic Reactions, and Surface Coking of n-Decane in Helical Tubes
Xing Sun et al.
ENERGY & FUELS (2018)
Numerical Study of Flow and Heat Transfer of n-Decane with Pyrolysis and Pyrolytic Coking under Supercritical Pressures
Zhi Tao et al.
ENERGY & FUELS (2017)
Pyrolysis and coking of endothermic hydrocarbon fuel in regenerative cooling channel under different pressures
Baitang Jin et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)
Heat transfer performance of aviation kerosene RP-3 flowing in a vertical helical tube at supercritical pressure
Jie Wen et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental research on convective heat transfer of supercritical hydrocarbon fuel flowing through U-turn tubes
Yanchen Fu et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal behavior in the cracking reaction zone of scramjet cooling channels at different channel aspect ratios
Silong Zhang et al.
ACTA ASTRONAUTICA (2016)
Secondary flow and oxidation coking deposition of aviation fuel
Xinyan Pei et al.
FUEL (2016)
Coupled Heat Transfer of Supercritical n-Decane in a Curved Cooling Channel
Jianhan Liang et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2016)
Flow rate distribution of cracked hydrocarbon fuel in parallel pipes
Jiang Qin et al.
FUEL (2015)
Effectiveness of Spalart-Allmaras Turbulence Model in Analysis of Curved Cooling Channels
Marco Pizzarelli
AIAA JOURNAL (2013)
Thermal Cracking of Hydrocarbon Aviation Fuels in Regenerative Cooling Microchannels
Rongpei Jiang et al.
ENERGY & FUELS (2013)
Heat transfer and thermal cracking behavior of hydrocarbon fuel
Ling-yun Hou et al.
FUEL (2013)
Pyrolytic depositions of hydrocarbon aviation fuels in regenerative cooling channels
Guozhu Liu et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)
Visualization Experiments of a Specific Fuel Flow Through Quartz-glass Tubes Under both Sub- and Supercritical Conditions
Deng Hongwu et al.
CHINESE JOURNAL OF AERONAUTICS (2012)
Analysis of Curved-Cooling-Channel Flow and Heat Transfer in Rocket Engines
Marco Pizzarelli et al.
JOURNAL OF PROPULSION AND POWER (2011)
Study of turbulent heat transfer of aviation kerosene flows in a curved pipe at supercritical pressure
Xunfeng Li et al.
APPLIED THERMAL ENGINEERING (2010)
The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces
R. Kamali et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2008)