Related references
Note: Only part of the references are listed.Effects of advanced injection timing and inducted gaseous fuel on performance, combustion and emission characteristics of a diesel engine operated in dual-fuel mode
Swarup Kumar Nayak et al.
FUEL (2022)
Flame Characteristics and Ignition Delay Times of 2,5-Dimethylfuran: A Systematic Review With Comparative Analysis
Van Vang Le et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)
A study of the spray ignition characteristics of hydro-processed renewable diesel, petroleum diesel, and biodiesel using a constant volume combustion chamber
Akhmad F. Alhikami et al.
COMBUSTION AND FLAME (2021)
Experimental study of the spray ignition characteristics of hydro-processed renewable jet and petroleum jet fuels in a constant volume combustion chamber
Akhmad Faruq Alhikami et al.
FUEL (2021)
An experimental and kinetic modeling study of gas-phase autoignition of n-Pentadecane at low-to-high temperatures and elevated pressures
Mohsin Raza et al.
FUEL (2021)
Experimental and modeling study of the autoignition for diesel and n-alcohol blends from ethanol to n-pentanol in shock tube and rapid compression machine
Sixu Wang et al.
COMBUSTION AND FLAME (2021)
Analysis and Correlation of Ignition Delay for Hydrotreated Vegetable Oil and Ultra Low Sulfur Diesel and Their Blends in Ignition Quality Tester
Samy A. Alkhayat et al.
FUEL (2021)
Autoignition and preliminary heat release of gasoline surrogates and their blends with ethanol at engine-relevant conditions: Experiments and comprehensive kinetic modeling
Song Cheng et al.
COMBUSTION AND FLAME (2021)
Autoignition behavior of methanol/diesel mixtures: Experiments and kinetic modeling
Jizhen Zhu et al.
COMBUSTION AND FLAME (2021)
Chemical Kinetics Study on Combustion of Ethanol/biodiesel/n-heptane
Jun Kong et al.
RENEWABLE ENERGY (2020)
A numerical study on the quasi-steady spray and soot characteristics for soybean methyl ester and its blends with ethanol using CFD-reduced chemical kinetics approach
Xinwei Cheng et al.
ENERGY (2020)
The autoignition of Heptamethylnonane at moderate-to-high temperatures and elevated pressures: Shock tube study and improved chemical kinetic model
Mohsin Raza et al.
FUEL (2020)
Autoignition of n-Hexane, Cyclohexane, and Methylcyclohexane in a Constant Volume Combustion Chamber
Dong Han et al.
ENERGY & FUELS (2019)
Effect of Injection Pressure and Air-Fuel Ratio on the Self-Ignition Properties of 1-Butanol-Diesel Fuel Blends: Study Using a Constant-Volume Combustion Chamber
Hubert Kuszewski
ENERGY & FUELS (2019)
An experimental investigation into combustion characteristics of HVO compared with TME and ULSD at varied blend ratios
Yanfei Li et al.
FUEL (2019)
Autoignition of n-heptane and butanol isomers blends in a constant volume combustion chamber
Xin Liang et al.
FUEL (2019)
Investigation of n-dodecane pyrolysis at various pressures and the development of a comprehensive combustion model
Meirong Zeng et al.
ENERGY (2018)
Experimental study of the combustion and emission characteristics of ethanol, diesel-gasoline, n-heptane-iso-octane, n-heptane-ethanol and decane-ethanol in a constant volume vessel
Runzhao Li et al.
FUEL (2018)
A compact reaction mechanism of methane oxidation at high pressures
Victor P. Zhukov et al.
PROGRESS IN REACTION KINETICS AND MECHANISM (2018)
Experimental studies and techno-economic analysis of hydro-processed renewable diesel production in Taiwan
Keng-Hao Hsu et al.
ENERGY (2018)
Autoignition of blends of n-butanol and ethanol with diesel or biodiesel fuels in a constant-volume combustion chamber
Magin Lapuerta et al.
ENERGY (2017)
Experimental and Kinetic Modeling Study of Autoignition Characteristics of n-Heptane/Ethanol by Constant Volume Bomb and Detail Reaction Mechanism
Runzhao Li et al.
ENERGY & FUELS (2017)
Use of the constant volume combustion chamber to examine the properties of autoignition and derived cetane number of mixtures of diesel fuel and ethanol
Hubert Kuszewski et al.
FUEL (2017)
Development of multi-component diesel surrogate fuel models - Part II: Validation of the integrated mechanisms in 0-D kinetic and 2-D CFD spray combustion simulations
Hiew Mun Poon et al.
FUEL (2016)
Effects of iso-octane/ethanol blend ratios on the observance of negative temperature coefficient behavior within the Ignition Quality Tester
Gregory E. Bogin et al.
FUEL (2016)
An experimental study of the spray ignition of alkanes
Aniket Tekawade et al.
FUEL (2016)
A shock tube ignition delay study of conventional diesel fuel and hydroprocessed renewable diesel fuel from algal oil
Sandeep Gowdagiri et al.
FUEL (2014)
Alcohol combustion chemistry
S. Mani Sarathy et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2014)
Development and Validation of Chemical Kinetic Mechanism Reduction Scheme for Large-Scale Mechanisms
Hiew Mun Poon et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2014)
A study of liquid fuel injection and combustion in a constant volume vessel at diesel engine conditions
Z. Hu et al.
FUEL (2013)
Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20
S. M. Sarathy et al.
COMBUSTION AND FLAME (2011)
Relative Reactivities of the Isomeric Butanols and Ethanol in an Ignition Quality Tester
Francis M. Haas et al.
ENERGY & FUELS (2011)
Recent progress in the development of diesel surrogate fuels
William J. Pitz et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
A Reduced Mechanism for High-Temperature Oxidation of Biodiesel Surrogates
Zhaoyu Luo et al.
ENERGY & FUELS (2010)
The autoignition of iso-cetane at high to moderate temperatures and elevated pressures: Shock tube experiments and kinetic modeling
Matthew A. Oehlschlaeger et al.
COMBUSTION AND FLAME (2009)
Detailed chemical kinetic models for the low-temperature combustion of hydrocarbons with application to gasoline and diesel fuel surrogates
F. Battin-Leclerc
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Combustion and emission characteristics of a two-stroke diesel engine operating on alcohol
XL Li et al.
RENEWABLE ENERGY (2005)
Study of the influence of nozzle seat type on injection rate and spray behaviour
V Bermúdez et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2005)
The relation of cool flames and auto-ignition phenomena to process safety at elevated pressure and temperature
AA Pekalski et al.
JOURNAL OF HAZARDOUS MATERIALS (2002)
Share Paper
