Related references
Note: Only part of the references are listed.A comparative study of combustion and emission characteristics of dual-fuel engine fueled with diesel/methanol and diesel-polyoxymethylene dimethyl ether blend/methanol
Hao Chen et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)
A review of the emission reduction potential of fuel switch towards biomass and electricity in European basic materials industry until 2030
M. Rehfeldt et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Assessing fuel properties effects of 2,5-dimethylfuran on microscopic and macroscopic characteristics of oxygenated fuel/diesel blends spray
Peng Zhang et al.
SCIENTIFIC REPORTS (2020)
Environmental and energy assessment of biomass residues to biochar as fuel: A brief review with recommendations for future bioenergy systems
Mengshan Lee et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Next generation biofuels derived from thermal and chemical conversion of the Greek transport sector
Katerina G. Tsita et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)
Hydrogenation and Hydrolysis of Furfural to Furfuryl Alcohol, Cyclopentanone, and Cyclopentanol with a Heterogeneous Copper Catalyst in Water
Xuyang Zhou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Exploring the combustion chemistry of a novel lignocellulose-derived biofuel: cyclopentanol. Part I: quantum chemistry calculation and kinetic modeling
Liming Cai et al.
COMBUSTION AND FLAME (2019)
Experimental study of the spray, combustion, and emission performance of a diesel engine with high n-pentanol blending ratios
Mingzhang Pan et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Renewable aviation fuel by advanced hydroprocessing of biomass: Challenges and perspective
Elaine Siew Kuan Why et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Recent development of production technology of diesel- and jet-fuel-range hydrocarbons from inedible biomass
Yoshinao Nakagawa et al.
FUEL PROCESSING TECHNOLOGY (2019)
Active site isolation in bismuth-poisoned Pd/SiO2 catalysts for selective hydrogenation of furfural
Nikolay Cherkasov et al.
APPLIED CATALYSIS A-GENERAL (2019)
An overview on the light alcohol fuels in diesel engines
Yahya Celebi et al.
FUEL (2019)
Exploring the combustion chemistry of a novel lignocellulose-derived biofuel: cyclopentanol. Part II: experiment, model validation, and functional group analysis
Liming Cai et al.
COMBUSTION AND FLAME (2019)
Electrospray cone-jet mode for weakly viscoelastic liquids
S. Blanco-Trejo et al.
PHYSICAL REVIEW E (2019)
Recent developments and key barriers to advanced biofuels: A short review
You-Kwan Oh et al.
BIORESOURCE TECHNOLOGY (2018)
Experimental investigation on effect of ethanol and di-ethyl ether addition on the spray characteristics of diesel/biodiesel blends under high injection pressure
Cheng Zhan et al.
FUEL (2018)
Experimental study on non-vaporizing spray characteristics of biodiesel-blended gasoline fuel in a constant volume chamber
Shubhra Kanti Das et al.
FUEL PROCESSING TECHNOLOGY (2018)
Making synthetic fuels for the road transportation sector via solid oxide electrolysis and catalytic upgrade using recovered carbon dioxide and residual biomass
Federico Monaco et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Biomass and fossil fuel combustion contributions to elemental carbon across the San Francisco Bay Area
Subin Yoon et al.
ATMOSPHERIC ENVIRONMENT (2018)
Achieving clean and efficient engine operation up to full load by combining optimized RCCI and dual-fuel diesel-gasoline combustion strategies
Jesus Benajes et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Experimental investigation on the effect of n-pentanol blending on spray, ignition and combustion characteristics of waste cooking oil biodiesel
Yinjie Ma et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Effects of injection pressure on ignition and combustion characteristics of diesel in a premixed methanol/air mixture atmosphere in a constant volume combustion chamber
Chunde Yao et al.
FUEL (2017)
Macroscopic and microscopic spray characteristics of fatty acid esters on a common rail injection system
Dong Han et al.
FUEL (2017)
Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review
Peng Geng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Selective conversion of furfural to cyclopentanol over cobalt catalysts in one step
Yan-Fu Ma et al.
CHINESE CHEMICAL LETTERS (2017)
Laminar flame characteristics of cyclopentanone at elevated temperatures
Xiuchao Bao et al.
APPLIED ENERGY (2017)
Implementation of two color method to investigate late cycle soot oxidation process in a CI engine under low load conditions
J. Javier Lopez et al.
APPLIED THERMAL ENGINEERING (2017)
Effects of six-carbon alcohols, ethers and ketones with chain or ring molecular structures on diesel low temperature combustion
Zunqing Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Spray and evaporation characteristics of n-pentanol-diesel blends in a constant volume chamber
Yinjie Ma et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Homogeneous charge compression ignition (HCCI) combustion of polyoxymethylene dimethyl ethers (PODE)
Zhi Wang et al.
FUEL (2016)
Experimental study on spray, combustion and emission characteristics of pine oil/diesel blends in a multi-cylinder diesel engine
Haozhong Huang et al.
FUEL PROCESSING TECHNOLOGY (2016)
Optical study on the combustion characteristics and soot emissions of diesel-soybean biodiesel-butanol blends in a constant volume chamber
D. H. Qi et al.
JOURNAL OF THE ENERGY INSTITUTE (2016)
Numerical study of the effects of injector needle movement and the nozzle inclination angle on the internal fluid flow and spray structure of a group-hole nozzle layout
Hadi Taghavifar et al.
APPLIED MATHEMATICAL MODELLING (2015)
Comparison of lignin, cellulose, and hemicellulose contents for biofuels utilization among 4 types of lignocellulosic crops
Suk-Jun Jung et al.
BIOMASS & BIOENERGY (2015)
Blending lignin-derived oxygenate in enhanced multi-component diesel fuel for improved emissions
J. M. Herreros et al.
APPLIED ENERGY (2014)
Experimental study of spray characteristics of biodiesel derived from waste cooking oil
Balaji Mohan et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Production, properties and catalytic hydrogenation of furfural to fuel additives and value-added chemicals
Kai Yan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamber
Ji Zhang et al.
APPLIED ENERGY (2013)
Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system
Pin-Chia Chen et al.
FUEL (2013)
Spray Characteristics of Gelled Propellants in Novel Impinging Jet Injector
Li-jun Yang et al.
JOURNAL OF PROPULSION AND POWER (2013)
A noble-metal free Cu-catalyst derived from hydrotalcite for highly efficient hydrogenation of biomass-derived furfural and levulinic acid
Kai Yan et al.
RSC ADVANCES (2013)
Influence of temperature and mixture stratification on HCCI combustion using chemiluminescence images and CFD analysis
Haifeng Liu et al.
APPLIED THERMAL ENGINEERING (2012)
Opportunities and challenges for a sustainable energy future
Steven Chu et al.
NATURE (2012)
Cyclic Oxygenates: A New Class of Second-Generation Biofuels for Diesel Engines
Michael Boot et al.
ENERGY & FUELS (2009)
Performance and Emission Characteristics of Diesel Engines Fueled with Diesel-Dimethoxymethane (DMM) Blends
Ruijun Zhu et al.
ENERGY & FUELS (2009)
Soot and chemiluminescence in diesel combustion of bio-derived, oxygenated and reference fuels
R. J. H. Klein-Douwel et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Gradient effects on two-color soot optical pyrometry in a heavy-duty DI diesel engine
Mark P. B. Musculus et al.
COMBUSTION AND FLAME (2008)
Development and validation of a theoretical model for diesel spray penetration
JM Desantes et al.
FUEL (2006)
High selectivity of MCM-22 for cyclopentanol formation in liquid-phase cyclopentene hydration
D Nuntasri et al.
JOURNAL OF CATALYSIS (2003)
Concurrent measurement of temperature and soot concentration of pulverized coal flames
G Lu et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2002)
Share Paper
