☆ 4.7 Article

Study on combustion characteristic of premixed H2/C3H8/air and working performance in the micro combustor with block

FUEL (2022)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Effect of pins and exit-step on thermal performance and energy efficiency of hydrogen-fueled combustion for micro-thermophotovoltaic

Bo Xie et al.

Summary: By designing the combustor coupling with pins and exit-step configurations, the micro thermophotovoltaic system shows improved energy efficiency and thermal performance. The optimal length ratio of exit-step to combustor is found to be 0.66 for reducing exhaust loss, resulting in stable flame and high energy efficiency.

ENERGY (2022)

Add to Collection

Article Energy & Fuels

Effects analysis on the catalytic combustion and heat transfer performance enhancement of a non-premixed hydrogen/air micro combustor

Jiaqiang E et al.

Summary: The study shows that in the catalytic combustor, homogeneous reactions are significantly weakened, resulting in higher and more uniform outer wall temperatures, better fluid mixing, and reduced temperature difference at the outer wall. Additionally, the catalytic combustor exhibits lower average flow velocity and pressure loss at an inlet velocity of 10 m/s.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Investigation on the combustion and emission characteristics of diesel engine fueled with diesel/methanol/n-butanol blends

Zhiqing Zhang et al.

Summary: This work investigated the effects of different fuel blending ratios on the spray, combustion, and emission characteristics of a diesel engine fueled with diesel/methanol/n-butanol blended fuel. The results showed that blended fuel had longer ignition delay, higher cylinder pressure, and higher peak heat release rate compared with diesel. The blended fuel also reduced NOx, CO, soot, and HC emissions.

FUEL (2022)

Add to Collection

Article Thermodynamics

Investigation on H2/air combustion with C3H8 addition in the combustor with part/full porous medium

Qingguo Peng et al.

Summary: The study examined the effects of different propane blended ratios on premixed H-2/air combustion in micro thermophotovoltaic systems, finding that adding 5% propane can improve combustion characteristics and energy conversion efficiency. The formation of heat recirculation in the combustor was noted to enhance thermal performance and achieve higher flame temperature and radiation temperature.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Review Thermodynamics

Process in micro-combustion and energy conversion of micro power system: A review

E. Jiaqiang et al.

Summary: This article reviews the research on micro power equipment focusing on flame optimization and energy conversion efficiency. Different influencing parameters in various systems, such as combustion efficiency and conversion efficiency, are analyzed, emphasizing the significance of energy conversion efficiency in micro power equipment.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

NOx emission and energy conversion efficiency studies on ammonia-powered micro-combustor with ring-shaped ribs in fuel-rich combustion

Siliang Ni et al.

Summary: This study conducted numerical simulations on three micro-combustors with different shapes of ribs to reduce NOx emissions while ensuring energy conversion efficiency. The results showed that the double-rib structure improves thermal performance and NH and NH2 are beneficial to NO consumption. Properly optimizing the internal structure of the combustor can achieve high energy conversion efficiency and low NO emissions simultaneously.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Energy & Fuels

Effects of propane addition and burner scale on the combustion characteristics and working performance

Qingguo Peng et al.

Summary: The study investigated the effects of burner size and fuel properties on combustion and working performance, finding that the addition of propane improved thermal performance and increased radiation power at lower fuel flow rates. Furthermore, chamber diameter and heat recirculation zones significantly altered burning reactions and extended flame blow-off limits, with a more uniform temperature profile achieved in appropriately sized tubes with suitable step heights.

APPLIED ENERGY (2021)

Add to Collection

Article Energy & Fuels

Numerical study of an integrated miniature ejector for catalytic micro-combustors

Guangyao Yang et al.

Summary: This study proposed an integrated micro-ejector for providing a mixture of n-butane and air to micro-combustors. The effects of fuel jet velocity and geometrical parameters of the ejector on the entrainment ratio were numerically investigated. The findings suggest that increasing the nozzle diameter leads to a sharp decrease in the entrainment ratio, while increasing the diameter of the mixing section can drastically augment the entrainment ratio. Additionally, increasing the total area of air inlets gives rise to a drastic decrease in the entrainment ratio, showing the importance of optimizing these design parameters for micro-ejectors.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Add to Collection

Review Energy & Fuels

Recent progress in flame stabilization technologies for combustion-based micro energy and power systems

Jianlong Wan et al.

Summary: This article discusses the development and classification of flame stabilization technologies in micro-combustors, including single flame stabilization technologies, combined flame stabilization technologies, and other technologies. Progress made in the past decade is summarized, along with a discussion on the underlying mechanisms of these flame anchoring strategies.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Numerical study on the influence of controllable flow ratio on combustion characteristics of a controllable central slotted bluff body and cavity combined micro combustor

Fulei Xu et al.

Summary: The CC micro combustor with a controllable flow rate of 0.4 exhibits the highest combustion efficiency and better combustion stability under high inlet volume flow rates in micro combustion systems.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Thermodynamics

Heat recirculation and heat losses in porous micro-combustors: Effects of wall and porous media properties and combustor dimensions

Jun Li et al.

Summary: The study aims to analyze heat fluxes in porous micro-combustors and discuss the effects of wall thermal conductivity and porous media properties on flame temperature. Results show that smaller porous micro-combustors have a higher proportion of heat recirculation relative to heat losses, and flame temperature is inversely related to the ratio of total heat losses to total heat recirculation.

ENERGY (2021)

Add to Collection

Article Energy & Fuels

The effects of Fe2O3 based DOC and SCR catalyst on the combustion and emission characteristics of a diesel engine fueled with biodiesel

Zhiqing Zhang et al.

Summary: The paper investigates the effects of Fe2O3 based diesel oxidation catalyst and selective catalytic reduction catalyst on engine characteristics of diesel engine fueled with biodiesels. The results show that biodiesel fuel reduces CO and HC emissions, but increases NOx emissions slightly.

FUEL (2021)

Add to Collection

Article Chemistry, Physical

Comparative investigation of combustion and thermal characteristics of a conventional micro combustor and micro combustor with internal straight/spiral fins for thermophotovoltaic system

Ziqiang He et al.

Summary: The study focuses on the impact of hydrogen mass flow rate, equivalence ratio, and materials on the thermal performance of micro-thermophotovoltaic (MTPV) system, providing suggestions for improving energy output.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Thermodynamics

Thermal performances and emitter efficiency improvement studies on premixed micro-combustors with different geometric shapes for thermophotovoltaics applications

Siliang Ni et al.

Summary: This study compared the thermal performance and efficiency of unconventional T- and Y-shaped micro-combustors with the traditional I-shaped one. Results showed significant improvements in thermal performance and efficiency for T- and Y-shaped combustors under the same conditions. Optimization of parameters can enhance combustion efficiency.

ENERGY (2021)

Add to Collection

Article Chemistry, Applied

Role of hydrogen addition in propane/air flame characteristic and stability in a micro-planar combustor

Aikun Tang et al.

Summary: Experimental study on micro-scale combustion with a micro-planar quartz combustor shows that blending hydrogen significantly extends flame stability by overcoming flame instability and inhibiting flame type transition. The addition of hydrogen affects flame dynamics and helps maintain flame symmetry.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Investigation on hydrogen-fueled combustion characteristics and thermal performance in a micro heat-recirculation combustor inserted with block

Jia Wei et al.

Summary: Numerical investigation was conducted on premixed H2/air combustion in a micro heat-recirculation combustor with/without block. The findings show that block setting enhances flame stability and preheating effect, while also reducing heat loss via exhaust gas. Combustor with a transverse block demonstrates better thermal performance compared to longitudinal block, with increasing block height leading to broadening of high-temperature zone and improved radiation efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Evaluation of NOx emissions characteristics in a CO2-Free micro-power system by implementing a perforated plate

Tao Cai et al.

Summary: Ammonia, as a carbon-free fuel with high hydrogen content, has potential applications in transportation, propulsion, and power generation sectors. However, direct combustion of ammonia leads to high NOx emission, which needs to be mitigated. Factors such as plate porosity, thickness, distance, and inlet pressure play important roles in reducing NO formation.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Effects of porosity and multilayers of porous medium on the hydrogen-fueled combustion and micro-thermophotovoltaic

Qingguo Peng et al.

Summary: The study found that a small porosity of porous medium can improve flame stability and heat transfer, but has adverse effects on component flow and flame propagation. The use of multi-PM-layers helps balance the opposing effects on fluidity and thermal performance, leading to higher combustion efficiency and radiation temperature.

RENEWABLE ENERGY (2021)

Add to Collection

Article Thermodynamics

Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor

Jianfeng Pan et al.

ENERGY (2020)

Add to Collection

Article Energy & Fuels

Combustion characteristics and thermal performance of premixed hydrogen-air in a two-rearward-step micro tube

Qingguo Peng et al.

APPLIED ENERGY (2019)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation of a micro-thermophotovoltaic system with different backward-facing steps and wall thicknesses

Qingguo Peng et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Numerical comparison of H2/air catalytic combustion characteristic of micro-combustors with a conventional, slotted or controllable slotted bluff body

Yunfei Yan et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air

Qingguo Peng et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Numerical investigation on flame blow-off limit of a novel microscale Swiss-roll combustor with a bluff-body

Aiwu Fan et al.

ENERGY (2017)

Add to Collection

Article Energy & Fuels

A compact skeletal mechanism of propane towards applications from NTC-affected ignition predictions to CFD-modeled diffusion flames: Comparisons with experiments

Kuang C. Lin et al.

FUEL (2017)

Add to Collection

Article Chemistry, Physical

Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor

Jianfeng Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Physical

A miniaturized power generation system cascade utilizing thermal energy of a micro-combustor: Design and modelling

Long Meng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Energy & Fuels

Combustion characteristics of premixed propane/hydrogen/air in the micro-planar combustor with different channel-heights

Aikun Tang et al.

APPLIED ENERGY (2017)

Add to Collection

Article Thermodynamics

Effects of heat recirculation on combustion characteristics of n-heptane in micro combustors

Junwei Li et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Engineering, Environmental

Combustion process and entropy generation in a novel microcombustor with a block insert

Yang Wenming et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Engineering, Environmental

Flame-anchoring mechanisms of a micro cavity-combustor for premixed H2/air flame

Jianlong Wan et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Engineering, Chemical

Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor

Aikun Tang et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Add to Collection

Article Thermodynamics

Numerical investigation of a novel micro combustor with double-cavity for micro-thermophotovoltaic system

Yang Su et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Article Energy & Fuels

Numerical study of diffusion filtration combustion characteristics in a plane-parallel packed bed

Jun-Rui Shi et al.

FUEL (2015)

Add to Collection

Article Energy & Fuels

A non-monotonic variation of blow-off limit of premixed CH4/air flames in mesoscale cavity-combustors with different thermal conductivities

Jianlong Wan et al.

FUEL (2015)

Add to Collection

Article Chemistry, Physical

Entropy generation analysis of fuel lean premixed CO/H2/air flames

Dongyue Jiang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Chemistry, Physical

A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Thermodynamics

A comparative study of n-propanol, propanal, acetone, and propane combustion in laminar flames

Jing Gong et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)

Add to Collection

Article Thermodynamics

Development of micro-thermophotovoltaic power generator with heat recuperation

W. M. Yang et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection

Review Thermodynamics

Recent advances in understanding of flammability characteristics of hydrogen

Antonio L. Sanchez et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2014)

Add to Collection

Article Thermodynamics

Investigation on the thermal flame thickness for lean premixed combustion of low calorific H-2/CO mixtures within porous inert media

S. Voss et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)

Add to Collection

Review Thermodynamics

Microscale combustion: Technology development and fundamental research

Yiguang Ju et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)

Add to Collection

Article Energy & Fuels

Porous media combustion for micro thermophotovoltaic system applications

S. K. Chou et al.

APPLIED ENERGY (2010)

Add to Collection

Article Thermodynamics

Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux

J. Li et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Effects of hydrocarbon substitution on atmospheric hydrogen-air flame propagation

CK Law et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.