4.4 Article

Sequential anaerobic-aerobic treatment of rice mill wastewater and simultaneous power generation in microbial fuel cell

Journal

ENVIRONMENTAL TECHNOLOGY
Volume 44, Issue 21, Pages 3176-3182

Publisher

TAYLOR & FRANCIS LTD
DOI: 10.1080/09593330.2022.2053753

Keywords

Biocathode; microbial fuel cell; rice mill wastewater; power generation; sequential anaerobic-aerobic treatment

Ask authors/readers for more resources

This study investigated the treatment of rice mill wastewater in a dual-chamber microbial fuel cell (MFC) with a biological cathode (MFCB). The results showed that the MFCB had a higher chemical oxygen demand (COD) removal efficiency, but lower power density and electrochemical activity compared to an identical MFC with an abiotic cathode (MFCA).
Microbial fuel cells (MFCs) have attracted widespread interest due to their capability to generate power while treating wastewater. In the present investigation, rice mill wastewater (RMW) was treated in a dual-chamber MFC with a biological cathode (MFCB), in which anaerobic treatment was provided in the anode compartment, and aerobic treatment was enployed in the cathode compartment. The performance was compared with an identical MFC with an abiotic cathode (MFCA). During continuous operation, the hydraulic retention time (HRT) of the anode compartments of both MFCs was kept at 12 h. The maximum volumetric power density obtained in MFCB (379.53 mW/m(3)) was lower than MFCA (791.72 mW/m(3)). Similarly, the maximum open-circuit voltage (OCV) and operating voltages were 0.519 V and 0.170 V for MFCB, while for the MFCA, they were 0.774 V and 0.251 V, respectively. The internal resistance of MFCA was 372.34 ohm while the MFCB showed a higher internal resistance of 533.89 ohm. The linear sweep voltammetry and cyclic voltammetry also demonstrated high electrochemical activity in MFCA compared to MFCB. However, MFCB has shown a higher chemical oxygen demand (COD) removal efficiency (96.8%) than MFCA (88.4%) under steady-state conditions. Both anaerobic and aerobic degradation of organic substrates significantly reduced the COD of RMW. Furthermore, the absence of an expensive catalyst in the cathode substantially reduces the cost of the system. The electrical performance of the system can be enhanced by employing novel cathode material with surface modification.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available