☆ 4.7 Article

Control measure prioritization in Fine - Kinney-based risk assessment: a Bayesian BWM-Fuzzy VIKOR combined approach in an oil station

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Assessment of occupational health and safety risks in a Turkish public hospital using a two-stage hesitant fuzzy linguistic approach

Asli Calis Boyaci et al.

Summary: Occupational health and safety risk assessment studies have become important due to the increase in occupational accidents and diseases. This study uses the Fine-Kinney and multi-criteria hesitant fuzzy linguistic term set methods to assess OHS risks in the health sector in Turkey, and takes actions to mitigate the risks.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Optimal selection of safety recommendations: A hybrid fuzzy multi-criteria decision-making approach to HAZOP

Morteza Cheraghi et al.

Summary: The Hazard and Operability (HAZOP) study generates a list of recommendations for system safety improvement, but due to resource limitations, it is necessary to prioritize and implement specific recommendations based on expert evaluation. This study aims to develop a comprehensive hierarchy of factors for recommendation evaluation, utilizing the Best Worst Method (BWM) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) to rank the recommendations and improve accuracy.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Evaluating the Comprehensive Performance of 5G Base Station: A Hybrid MCDM Model Based on Bayesian Best-Worst Method and DQ-GRA Technique

Mingliang Liang et al.

Summary: With the rapid development of 5G technology in recent years, the comprehensive performance evaluation of 5G base stations becomes necessary. This study constructs a performance evaluation index system and adopts a novel hybrid MCDM model for evaluation. The results show that signal coverage area and per capita input cost are the most important indicators affecting the overall performance of 5G base stations.

MATHEMATICAL PROBLEMS IN ENGINEERING (2022)

Add to Collection

Article Economics

Performance evaluation of Turkish Universities by an integrated Bayesian BWM-TOPSIS model

Muhammet Gul et al.

Summary: This study aims to develop a university ranking model by utilizing performance measures, helping universities optimize their performance efficiently. The study uses Bayesian Best-Worst Method (BBWM) and TOPSIS multicriteria decision-making (MCDM) method, and discusses different types of rankings.

SOCIO-ECONOMIC PLANNING SCIENCES (2022)

Add to Collection

Article Transportation

Cyber security risk assessment in autonomous shipping

Hasan Mahbub Tusher et al.

Summary: Autonomous ships require higher cyber security due to increased cyber-physical interaction. This study proposes a framework for assessing cyber security risks in autonomous shipping and finds that navigational systems are the most vulnerable to cyber threats.

MARITIME ECONOMICS & LOGISTICS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Assessing measures implemented by export-oriented RMG firms in an emerging economy during COVID-19

Ziaul Haque Munim et al.

Summary: This study assesses the measures implemented by the Ready-Made Garments (RMG) sector in Bangladesh during the COVID-19 pandemic. The findings highlight the most common and important measures taken for employees, suppliers, and buyers, providing a blueprint for future supply chain risk management during similar crises.

COMPUTERS & INDUSTRIAL ENGINEERING (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

An interval 2-Tuple linguistic Fine-Kinney model for risk analysis based on extended ORESTE method with cumulative prospect theory

Weizhong Wang et al.

Summary: The paper proposes an improved Fine-Kinney model integrating various techniques to comprehensively assess OHS risks, applied in the automobile components manufacturing process. Sensitivity analysis further demonstrates the effectiveness of the model.

INFORMATION FUSION (2022)

Add to Collection

Article Engineering, Environmental

Occupational health, safety and environmental risk assessment in textile production industry through a Bayesian BWM-VIKOR approach

M. Fatih Ak et al.

Summary: Occupational risk assessment (ORA) is a process to evaluate, rank, and classify workplace hazards and risks from the perspective of occupational health and safety. In this study, a holistic ORA using Bayesian BWM and VIKOR methods was implemented in a textile production plant, showing electricity hazard as the highest risk. Results can aid in formulating improvement measures for overall workplace safety.

STOCHASTIC ENVIRONMENTAL RESEARCH AND RISK ASSESSMENT (2022)

Add to Collection

Proceedings Paper Management

Determining the Importance of Barriers to IoT Implementation Using Bayesian Best-Worst Method

Zahra Asadipour Abkenar et al.

Summary: The Internet of Things (IoT) is a significant enabler of the Fourth Industrial Revolution and will impact supply chain management. However, there are barriers preventing various industries from fully utilizing IoT instruments in logistics and supply chain. This study identifies multiple barriers to IoT implementation in the food industry and determines their priority using the Bayesian Best-Worst Method (BWM). The lack of internet infrastructure is found to be the most vital barrier in implementing IoT in the food industry.

ADVANCES IN BEST-WORST METHOD, BWM2021 (2022)

Add to Collection

Proceedings Paper Management

A Multi-attribute Decision-Making to Sustainable Construction Material Selection: A Bayesian BWM-SAW Hybrid Model

Ramazan Alkan et al.

Summary: The increase in urbanization and developments in the production industry has led to rapid progress in the construction sector. In recent years, the necessity of sustainable construction practices has become increasingly important, in order to renew damaged buildings and reduce cost concerns arising from natural disasters. Limited resources and environmental concerns have prompted researchers and practitioners to develop sustainable building materials. Therefore, selecting the most appropriate sustainable construction material is crucial when constructing new buildings.

ADVANCES IN BEST-WORST METHOD, BWM2021 (2022)

Add to Collection

Article Development Studies

A GIS-based multiple ecotourism sustainability assessment of West Azerbaijan province, Iran

Davoud Omarzadeh et al.

Summary: Utilizing GIS techniques, the potential for sustainable ecotourism development in West Azerbaijan province in Iran was analyzed and mapped, highlighting the region's potential as a nature tourism hub. The detailed tourism sustainability map obtained through this study can be used for regional planning and development of tourism infrastructure.

JOURNAL OF ENVIRONMENTAL PLANNING AND MANAGEMENT (2022)

Add to Collection

Article Biodiversity Conservation

A hybrid risk prioritization method based on generalized TODIM and BWM for Fine-Kinney under interval type-2 fuzzy environment

Jing Tang et al.

Summary: This study aims to develop a hybrid risk prioritization approach for Fine-Kinney by combining generalized TODIM, best-worst, and interval type-2 fuzzy set to address the limitation of experts' evaluation under uncertain environment.

HUMAN AND ECOLOGICAL RISK ASSESSMENT (2021)

Add to Collection

Article Transportation

Building an assessment model for measuring airport resilience

Chun-Nen Huang et al.

Summary: This study proposes a novel assessment model for evaluating airport resilience, utilizing a Multiple Criteria DecisionMaking approach to measure resilience and develop protection strategies. By analyzing Taiwan's airports as a case study, the model's practicality and effectiveness are demonstrated, alongside sensitivity analysis and model comparisons to confirm reliability.

JOURNAL OF AIR TRANSPORT MANAGEMENT (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Evaluation of autonomous vehicle driving systems for risk assessment based on three-dimensional uncertain linguistic variables

Melike Erdogan et al.

Summary: This paper proposes a study using a multi-criteria decision-making method to evaluate alternative solutions of autonomous vehicle driving systems, taking into account risk criteria. The results of the study indicate that "Software Specifications" and "Reliability" are the most important main and sub-criteria.

APPLIED SOFT COMPUTING (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

An Advanced Stochastic Risk Assessment Approach Proposal Based on KEMIRA-M, QFD and Fine-Kinney Hybridization

Gulin Feryal Can et al.

Summary: An advanced stochastic risk assessment approach based on AV-QFD and KEMIRA-M was proposed in this study, aiming to perform a new criterion weighting procedure based on different distributions. The method includes obtaining the importance degree of each criterion and ranking criteria for each CS using AV-QFD.

INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING (2021)

Add to Collection

Article Environmental Sciences

A scenario-based approach for urban water management in the context of the COVID-19 pandemic and a case study for the Tabriz metropolitan area, Iran

Bakhtiar Feizizadeh et al.

Summary: The COVID-19 pandemic has had a significant impact on urban water supply and consumption, leading to increased domestic water consumption in 2020. The study developed an integrated spatial analysis approach to investigate the effects of COVID-19 on Urban Water Consumption Patterns and forecast future water demand. The results showed an increase in water deficit and domestic water consumption in Tabriz, with projections indicating a further increase in 2021.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Environmental

Risk assessment of hot and humid environments through an integrated fuzzy AHP-VIKOR method

Bahman Ramavandi et al.

Summary: This paper introduces a novel risk assessment and prioritization model, using hybrid AHP and VIKOR methods in a fuzzy environment. By ranking different working stations, the importance of risk assessment parameters and the contribution to the risk level were determined.

STOCHASTIC ENVIRONMENTAL RESEARCH AND RISK ASSESSMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

The Formulation of Epidemic Prevention Work of COVID-19 for Colleges and Universities: Priorities and Recommendations

Wan-Chi Jackie Hsu et al.

Summary: This study proposed a framework of epidemic prevention work for colleges and universities to effectively reduce the probability of COVID-19 transmission on campuses. Thirty-two epidemic prevention leaders from various universities in Taiwan jointly formulated the framework and identified 5 dimensions and 36 epidemic prevention measures. The Bayesian best worst method (BWM) was used to determine the most important measures for campus epidemic prevention, including establishing an epidemic prevention organization, thorough campus disinfection, indoor ventilation maintenance, contact isolation, and immigration regulations for overseas students.

SUSTAINABILITY (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

A holistic FMEA approach by fuzzy-based Bayesian network and best-worst method

Melih Yucesan et al.

Summary: The paper proposes a holistic FMEA approach that uses the fuzzy best-worst method to weight three risk parameters and find preference values of failure modes, while also utilizing the fuzzy Bayesian network to determine occurrence probabilities. This approach addresses uncertainty in failure data and includes a robust probabilistic risk analysis logic to capture the dependence between failure events.

COMPLEX & INTELLIGENT SYSTEMS (2021)

Add to Collection

Article Environmental Sciences

Green supplier selection for textile industry: a case study using BWM-TODIM integration under interval type-2 fuzzy sets

Erkan Celik et al.

Summary: This study investigated green supplier selection in the textile industry, proposing a decision-making approach that combines interval type-2 fuzzy sets, Best Worst Method, and TODIM methods. A case study in the Turkish textile industry identified factors such as dye and print quality, product design, and pattern suitability as crucial in green supplier selection.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Add to Collection

Article Economics

IDENTIFY AND RANK THE CHALLENGES OF IMPLEMENTING SUSTAINABLE SUPPLY CHAIN BLOCKCHAIN TECHNOLOGY USING THE BAYESIAN BEST WORST METHOD

Peide Liu et al.

Summary: Blockchain technology has the potential to address global supply chain challenges, but faces various barriers in implementation. The study identifies four categories of barriers, including technical, inter-organizational, intra-organizational, and external barriers, and ranks them using Bayesian Best Worst Method.

TECHNOLOGICAL AND ECONOMIC DEVELOPMENT OF ECONOMY (2021)

Add to Collection

Article Management

Evaluation of risks in foodgrains supply chain using failure mode effect analysis and fuzzy VIKOR

Rishabh Rathore et al.

Summary: This study used fuzzy VIKOR to prioritize the risk factors of the Indian foodgrain supply chain, finding that technological risk has the highest impact. This information can be valuable for improving the resilience of the supply chain.

INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2021)

Add to Collection

Article Management

Bayesian best-worst method: A probabilistic group decision making model

Majid Mohammadi et al.

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Establishing a Sustainable Sports Tourism Evaluation Framework with a Hybrid Multi-Criteria Decision-Making Model to Explore Potential Sports Tourism Attractions in Taiwan

Jen-Jen Yang et al.

SUSTAINABILITY (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

A New Fine-Kinney Method Based on Clustering Approach

Cansu Dagsuyu et al.

INTERNATIONAL JOURNAL OF UNCERTAINTY FUZZINESS AND KNOWLEDGE-BASED SYSTEMS (2020)

Add to Collection

Article Engineering, Industrial

An expanded HAZOP-study with fuzzy-AHP (XPA-HAZOP technique): Application in a sour crude-oil processing plant

Panagiotis K. Marhavilas et al.

SAFETY SCIENCE (2020)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A Bayesian Best-Worst Method-Based Multicriteria Competence Analysis of Crowdsourcing Delivery Personnel

Longxiao Li et al.

COMPLEXITY (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Evaluating and comparing ontology alignment systems: An MCDM approach

Majid Mohammadi et al.

JOURNAL OF WEB SEMANTICS (2020)

Add to Collection

Article Engineering, Environmental

A multi-objective model to optimal selection of safety measures in oil and gas facilities

Aliakbar Eslami Baladeh et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Add to Collection

Article Health Care Sciences & Services

Evaluation of Influenza Intervention Strategies in Turkey with Fuzzy AHP-VIKOR

Funda Samanlioglu

JOURNAL OF HEALTHCARE ENGINEERING (2019)

Add to Collection

Article Energy & Fuels

A decision-support system based on Pythagorean fuzzy VIKOR for occupational risk assessment of a natural gas pipeline construction

Suleyman Mete et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

Failure modes and effects analysis for CO2 transmission pipelines using a hesitant fuzzy VIKOR method

Jian Guo et al.

SOFT COMPUTING (2019)

Add to Collection

Article Ergonomics

Pythagorean fuzzy VIKOR-based approach for safety risk assessment in mine industry

Muhammet Gul et al.

JOURNAL OF SAFETY RESEARCH (2019)

Add to Collection

Article Computer Science, Artificial Intelligence

An integrated approach for failure mode and effects analysis based on fuzzy best-worst, relative entropy, and VIKOR methods

Zhang-peng Tian et al.

APPLIED SOFT COMPUTING (2018)

Add to Collection

Article Biodiversity Conservation

Fuzzy rule-based Fine-Kinney risk assessment approach for rail transportation systems

Muhammet Gul et al.

HUMAN AND ECOLOGICAL RISK ASSESSMENT (2018)

Add to Collection

Article Biodiversity Conservation

A review of occupational health and safety risk assessment approaches based on multi-criteria decision-making methods and their fuzzy versions

Muhammet Gul

HUMAN AND ECOLOGICAL RISK ASSESSMENT (2018)

Add to Collection

Article Green & Sustainable Science & Technology

A comparative outline for quantifying risk ratings in occupational health and safety risk assessment

Muhammet Gul et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Engineering, Chemical

A new Fine-Kinney-based risk assessment framework using FAHP-FVIKOR incorporation

Muhammet Gul et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A fuzzy Fine-Kinney-based risk evaluation approach with extended MULTIMOORA method based on Choquet integral

Weizhong Wang et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2018)

Add to Collection

Article Engineering, Industrial

An extended VIKOR method based on entropy measure for the failure modes risk assessment - A case study of the geothermal power plant (GPP)

Omidvar Mohsen et al.

SAFETY SCIENCE (2017)

Add to Collection

Article Engineering, Industrial

A new approximation for risk assessment using the AHP and Fine Kinney methodologies

Ali Kokangul et al.

SAFETY SCIENCE (2017)

Add to Collection

Review Computer Science, Artificial Intelligence

A state of the art literature review of VIKOR and its fuzzy extensions on applications

Muhammet Gul et al.

APPLIED SOFT COMPUTING (2016)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Green supplier development program selection using NGT and VIKOR under fuzzy environment

Anjali Awasthi et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2016)

Add to Collection

Article Management

Best-worst multi-criteria decision-making method: Some properties and a linear model

Jafar Rezaei

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2016)

Add to Collection

Article Biodiversity Conservation

Application of fuzzy VIKOR for evaluation of green supply chain management practices

Reza Rostamzadeh et al.

ECOLOGICAL INDICATORS (2015)

Add to Collection

Article Engineering, Chemical

A fuzzy DEMATEL method to evaluate critical operational hazards during gas freeing process in crude oil tankers

Emre Akyuz et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2015)

Add to Collection

Article Management

Best-worst multi-criteria decision-making method

Jafar Rezaei

OMEGA-INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE (2015)

Add to Collection

Article Computer Science, Information Systems

Fuzzy VIKOR method: A case study of the hospital service evaluation in Taiwan

Tsung-Han Chang

INFORMATION SCIENCES (2014)

Add to Collection

Article Engineering, Industrial

A multicriteria knapsack approach to economic optimization of industrial safety measures

Antonio C. Caputo et al.

SAFETY SCIENCE (2013)

Add to Collection

Article Engineering, Industrial

AHP-based methodology for selecting safety devices of industrial machinery

Antonio C. Caputo et al.

SAFETY SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component

R. Jeya Girubha et al.

MATERIALS & DESIGN (2012)

Add to Collection

Article Computer Science, Artificial Intelligence

Fuzzy VIKOR with an application to water resources planning

Serafim Opricovic

EXPERT SYSTEMS WITH APPLICATIONS (2011)

Add to Collection

Article Engineering, Chemical

Economic optimization of industrial safety measures using genetic algorithms

Antonio C. Caputo et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2011)

Add to Collection

Article Management

Construction project selection using fuzzy TOPSIS approach

Yong-tao Tan et al.

JOURNAL OF MODELLING IN MANAGEMENT (2010)

Add to Collection

Article Engineering, Industrial

Risk plus barriers = safety?

Erik Hollnagel

SAFETY SCIENCE (2008)

Add to Collection

Article Nuclear Science & Technology

The fast breeder test reactor - Design and operating experiences

G Srinivasan et al.

NUCLEAR ENGINEERING AND DESIGN (2006)

Add to Collection

Article Computer Science, Theory & Methods

Extensions of the TOPSIS for group decision-making under fuzzy environment

CT Chen

FUZZY SETS AND SYSTEMS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.