4.7 Article

Cu/FeSx modified AC for removing gaseous elemental mercury from flue gas

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Binary mineral sulfides sorbent with wide temperature range for rapid elemental mercury uptake from coal combustion flue gas

Shengcai Wang et al.

Summary: Developing efficient sorbents with rapid kinetics is the main challenge for Hg-0 capture from coal combustion flue gas. A binary mineral sulfide-based material combining copper sulfide and zinc sulfide was reported for the first time for Hg-0 removal over a wide temperature range, showing promising potential as an alternative to traditional activated carbon for Hg-0 capture.

ENVIRONMENTAL TECHNOLOGY (2021)

Article Chemistry, Physical

Fe Cations Control the Plasmon Evolution in CuFeS2 Nanocrystals

Yuan Yao et al.

Summary: By characterizing CuFeS2 in detail, this study reveals the origin of its plasmonic behavior and the complexity of oxidation states during synthesis, providing a theoretical basis for tuning plasmon intensity by changing the cation oxidation state.

CHEMISTRY OF MATERIALS (2021)

Article Engineering, Chemical

Bimetallic Fe-Cu-Based Metal-Organic Frameworks as Efficient Adsorbents for Gaseous Elemental Mercury Removal

Zhen Zhang et al.

Summary: The synthesized FeCu-MOFs exhibited good crystallinity and high elemental dispersity, with excellent Hg-0 removal efficiency higher than 90% in various conditions. The presence of O-2, HCl, and NO in flue gas improved the Hg-0 removal efficiency, while the FeCu-MOFs materials showed good resistance to water vapor and SO2 poisoning. The mercury equilibrium adsorption capacity of FeCu-MOFs was determined to be 12.27 mg/g, and the mercury removal process followed the Langmuir-Hinshelwood mechanism.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Chemistry, Physical

Remarkable differences between copper-based sulfides and iron-based sulfides for the adsorption of high concentrations of gaseous elemental mercury: Mechanisms, kinetics, and significance

Qixing Hu et al.

Summary: Copper sulfides and iron sulfides have been used for capturing gaseous elemental mercury from smelting flue gas, but exhibit different Hg-0 adsorption characteristics. The activation energy for Hg-0 oxidation on CuSx is lower than on FeSx, leading to higher efficiency in oxidizing Hg-0. However, HgS adsorbed on Cu-based sulfides is metastable and may release moderate concentrations of gaseous Hg-0.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Energy & Fuels

Adsorption of elemental mercury in flue gas using biomass porous carbons modified by microwave/hydrogen peroxide

Ying Li et al.

Summary: A clean modification method combining microwave activation and H2O2 impregnation of bio-char was proposed in this study to enhance the mercury adsorption capacity, which effectively improved the Hg0 removal efficiency by improving the pore structure and functional groups of biomass porous carbons. Oxygen and nitric oxide play a significant role in the mercury removal process.
Review Engineering, Environmental

Removal of pollutants from gas streams using Fenton (-like)-based oxidation systems: A review

Yangxian Liu et al.

Summary: Removal of pollutants from gas streams using Fenton-like oxidation systems has gained attention for its promising multi-pollutant removal capability. However, challenges like metal ion recovery, low radical utilization, and system stability remain to be addressed. Strategies like catalyst synthesis, mass transfer enhancement, and reactor optimization are proposed to overcome the existing defects and improve the efficiency of these technologies.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Engineering, Environmental

A Critical Review on Removal of Gaseous Pollutants Using Sulfate Radical-based Advanced Oxidation Technologies

Yangxian Liu et al.

Summary: The sulfate radical-based advanced oxidation technologies show promise in removing gaseous pollutants, but face challenges like unreliable technology and high costs. Combining multiple activation technologies can help overcome these drawbacks, while improving free radical yield and pollutant removal capacity, and conducting research to reduce costs are critical for further advancement.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Engineering, Environmental

Investigation on mercury removal and recovery based on enhanced adsorption by activated coke

Donghai An et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Review Engineering, Environmental

Novel carbon -based sorbents for elemental mercury removal from gas streams: A review

Dongjing Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

In Situ Decoration of Selenide on Copper Foam for the Efficient Immobilization of Gaseous Elemental Mercury

Jianping Yang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Environmental Sciences

Promotional removal of gas-phase Hg0 over activated coke modified by CuCl2

Jie Zhang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Engineering, Environmental

Toward an Understanding of Fundamentals Governing the Elemental Mercury Sequestration by Metal Chalcogenides

Zequn Yang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Copper sulfide microsphere for Hg0 capture from flue gas at low temperature

Dongjing Liu et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Article Engineering, Environmental

One Step Interface Activation of ZnS Using Cupric Ions for Mercury Recovery from Nonferrous Smelting Flue Gas

Yong Liao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Environmental Sciences

A sulfur-resistant CuS-modified active coke for mercury removal from municipal solid waste incineration flue gas

Wei Liu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Chemistry, Applied

ZnS/AC sorbent derived from the high sulfur petroleum coke for mercury removal

Qihuang Huo et al.

FUEL PROCESSING TECHNOLOGY (2019)

Article Engineering, Environmental

Removal of elemental mercury from simulated flue gas by ZSM-5 modified with Mn-Fe mixed oxides

Zhen Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Environmental Sciences

High-efficient adsorption and removal of elemental mercury from smelting flue gas by cobalt sulfide

Hui Liu et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Article Engineering, Environmental

Mercury removal using metal sulfide porous carbon complex

K. Suresh Kumar Reddy et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Engineering, Environmental

Effect of Nitrogen Oxides on Elemental Mercury Removal by Nanosized Mineral Sulfide

Hailong Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Chemical

H2S-Modified Natural Ilmenite: A Recyclable Magnetic Sorbent for Recovering Gaseous Elemental Mercury from Flue Gas

Sijie Zou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Chemistry, Physical

Removal of elemental mercury by Ce-Mn co-modified activated carbon catalyst

Jiang Wu et al.

CATALYSIS COMMUNICATIONS (2017)

Article Engineering, Environmental

Recyclable Naturally Derived Magnetic Pyrrhotite for Elemental Mercury Recovery from Flue Gas

Yong Liao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Article Engineering, Environmental

Complete reaction mechanisms of mercury oxidation on halogenated activated carbon

Chompoonut Rungnim et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Article Engineering, Environmental

CuO/TiO2 catalysts for gas-phase Hg0 catalytic oxidation

Wenqing Xu et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Chemistry, Analytical

Mercury compounds characterization by thermal desorption

M. Rumayor et al.

TALANTA (2013)

Article Energy & Fuels

Activated carbon injection for mercury control: Overview

Sharon Sjostrom et al.

Article Chemistry, Applied

Gas-phase elemental mercury capture by a V2O5/AC catalyst

Junwei Wang et al.

FUEL PROCESSING TECHNOLOGY (2010)

Review Engineering, Environmental

Kinetic studies of elemental mercury adsorption in activated carbon fixed bed reactor

G. Skodras et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Chemistry, Physical

Mercury Species and SO2 Adsorption on CaO(100)

Erdem Sasmaz et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)