☆ 4.7 Article

Bond behavior between GFRP bars and seawater sea-sand fiber-reinforced ultra-high strength concrete

ENGINEERING STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Compressive and transverse shear behaviour of novel FRP-UHPC hybrid bars

Jun-Jie Zeng et al.

Summary: The study investigates the compressive and transverse shear behavior of FRP-UHPC hybrid bars, confirming their validity in terms of ductile behavior, elastic-plastic response design, and improved transverse shear performance compared to FRP bars in isolation.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Design-oriented stress-strain model for FRP-confined ultra-high performance concrete (UHPC)

JinJing Liao et al.

Summary: This study developed a new design-oriented stress-strain model to predict the stress-strain relationship of FRP-confined UHPC cylinders under axial compression. The model accurately estimated characteristic stresses and strains and showed good agreement with most of the test results, filling the research gap in this area.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Construction & Building Technology

ECCs/UHPFRCCs with and without FRP reinforcement for structural strengthening/repairing: A state-of-the-art review

Baizhao Pan et al.

Summary: This paper provides a comprehensive review on the characteristics and application of high-performance cementitious composites with and without FRP grid reinforcement. It discusses the feasibility of using ECC/UHPFRCC for structural strengthening/repairing, and concludes that FRP grid-reinforced ECC/UHPFRCC exhibits better potential in improving the mechanical performance of composite structures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Mechanics

Behavior of FRP Ring-Confined CFST columns under axial compression

Jun-Jie Zeng et al.

Summary: This study focuses on strengthening CFST columns with FRP rings to increase their load capacity and improve their performance under compression. Experimental results show that FRP rings substantially enhance the ultimate load capacity and slightly enhance the yield strength of CFST columns.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Compressive behavior of FRP-confined ultra-high performance concrete (UHPC) in circular columns

Jinjing Liao et al.

Summary: Through axial compression tests on FRP-confined UHPC, it was found that increasing steel fiber content can improve ductility and stress-strain behavior of the material. Different variables such as steel fiber content, specimen sizes, FRP fiber types, and FRP thickness were investigated for their influence on the compressive behavior. The results also showed that the type of FRP confinement fiber had limited influence on the stress-strain behavior of the specimens.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics

Bo-Tao Huang et al.

Summary: This study assesses and models the crack characteristics of Seawater sea-sand Engineered Cementitious Composites (SS-ECC), exploring the influence of sea-sand size, fiber length, and fiber dosage. Proposed methods, including a five-dimensional representation and a probabilistic model, facilitate the design of SS-ECC in marine and coastal structures by considering crack characteristics and mechanical properties comprehensively.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Article Engineering, Civil

Three-dimensional finite element modeling and theoretical analysis of concrete confined with FRP rings

Jun-Jie Zeng et al.

Summary: The confinement mechanism of concrete fully confined with fiber-reinforced polymer (FRP) jacket differs from that of concrete partially confined with FRP rings/ties. The current design of concrete confined with FRP rings/ties relies on the arching action assumption, which has not been verified by theoretical or experimental evidence. A revised analysis model using advanced finite element approach has been implemented to study the stress distribution in concrete confined with FRP rings, leading to a new proposed confinement effectiveness coefficient for more reliable predictions.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Mechanics

Rate-dependent compressive behavior of concrete confined with Large-Rupture-Strain (LRS) FRP

Zhi-Wei Yan et al.

Summary: The study investigated the strain rate effect on LRS FRP-confined concrete through SHPB test and found that LRS FRP-confined concrete exhibited superior impact resistance compared to CFRP composites. The critical strain, compressive strength, and toughness of the LRS FRP-confined concrete specimen increased with increasing strain rate. Due to the large rupture strain characteristics, the LRS FRP-confined concrete specimen showed minimal visible damage after a single impact, highlighting the potential application of LRS FRP materials in impact resistance design of RC structures.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Mechanical behavior of large-rupture-strain (LRS) polyethylene naphthalene fiber bundles at different strain rates and temperatures

Yu-Lei Bai et al.

Summary: This experimental study investigated the impact of strain rate and temperature on the tensile mechanical properties of PEN fiber bundles. Results showed that tensile strength and elastic modulus increased with strain rate, while failure strain decreased. Additionally, the effects of temperature on tensile strength, toughness, and failure strain were not consistent from -50°C to 50°C.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Behavior of FRP spiral strip-confined concrete under cyclic axial compression

Jun-Jie Zeng et al.

Summary: The FRP spiral strip wrapping strengthening technique is effective in enhancing both strength and deformation capacity of reinforced concrete columns. The actual confinement effectiveness factor significantly influences the stress-strain curves of FRP spiral strip-confined concrete, while the level of confinement has limited influence on reducing the plastic strain. The existing axial stress-strain model for FRP fully confined concrete cylinders under cyclic compression underestimates the plastic strain and overestimates the envelop stress, and a revised model based on test results matches well with experimental data.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Compressive behavior of heat-damaged square concrete prisms confined with basalt fiber-reinforced polymer jackets

Jiang Song et al.

Summary: Research has been conducted on the compressive behavior of heat-damaged square concrete prisms confined by basalt fiber-reinforced polymer (BFRP) jackets, showing that external confinement is effective in enhancing the strength and deformation capacities of heat-damaged concrete. The strength and ultimate axial strains of the BFRP-confined heat-damaged square concrete prisms improved with increasing exposure temperature or number of BFRP jacket layers. The study also modified concrete confinement models to predict the compressive behavior of BFRP-confined heat-damaged concrete with a square cross-section.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Mechanics

Behaviour of FRP tube-concrete-encased steel composite columns

F. M. Ren et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Assessment of GFRP bond behaviour for the design of sustainable reinforced seawater concrete structures

Sergio Soares et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Durability-related properties of early-age and long-term resistant laboratory elaborated polymer-based repair mortars

Amel Aattache et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Axial compressive behavior of polyethylene terephthalate/carbon FRP-confined seawater sea-sand concrete in circular columns

Jun-Jie Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Civil

A stress-path dependent stress-strain model for FRP-confined concrete

M. H. Lai et al.

ENGINEERING STRUCTURES (2020)

Add to Collection

Review Construction & Building Technology

A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete

Azzam Ahmed et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability

Junwei Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Experimental investigation of bond behaviour of two common GFRP bar types in high - Strength concrete

Najia Saleh et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests

Wei Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Study on bond performance between FRP bars and seawater coral aggregate concrete

Shutong Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study

Yao Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers

Ke-Quan Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compression

Y. L. Li et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Article Mechanics

Compressive behavior of ultra-high performance fiber-reinforced concrete (UHPFRC) confined with FRP

Weiqiang Wang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments

Zhi-Qiang Dong et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)

Add to Collection

Article Polymer Science

Flexural Fatigue Properties of Ultra-High Performance Engineered Cementitious Composites (UHP-ECC) Reinforced by Polymer Fibers

Lili Sui et al.

POLYMERS (2018)

Add to Collection

Review Construction & Building Technology

Use of sea-sand and seawater in concrete construction: Current status and future opportunities

Jianzhuang Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Mechanics

Local bond-slip response of GFRP rebar in ultra-high-performance fiber-reinforced concrete

Doo-Yeol Yoo et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Construction & Building Technology

Bond characteristics of straight- and headed-end, ribbed-surface, GFRP bars embedded in high-strength concrete

Sirajul Islam et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Engineering, Civil

Bond Performance of Basalt Fiber-Reinforced Polymer Bars to Concrete

Ahmed El Refai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

An experimental and numerical study of reinforced ultra-high performance concrete slabs under blast loads

Jun Li et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Mechanics

Evaluation of bond stress-slip models for FRP reinforcing bars in concrete

Xiaoshan Lin et al.

COMPOSITE STRUCTURES (2014)

Add to Collection

Article Construction & Building Technology

Fibres for enhancing of the bond capacity between GFRP rebar and concrete

Yining Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Materials Science, Composites

Bond behavior of sand-coated deformed glass fiber reinforced polymer rebars

Weichen Xue et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)

Add to Collection

Article Engineering, Civil

Axial behavior of FRP-wrapped circular ultra-high performance concrete specimens

Soner Guler

STRUCTURAL ENGINEERING AND MECHANICS (2014)

Add to Collection

Article Mechanics

Effect of load eccentricity on the stress-strain relationship of FRP-confined concrete columns

Yu-Fei Wu et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Engineering, Multidisciplinary

Effects of structural fibers on bonding mechanism changes in interface between GFRP bar and concrete

B. Kim et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection

Article Engineering, Civil

Behavior and Modeling of Confined High-Strength Concrete

Q. G. Xiao et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)

Add to Collection

Article Construction & Building Technology

Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete

Qingduo Hao et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Engineering, Multidisciplinary

Interfacial bond strength of glass fiber reinforced polymer bars in high-strength concrete

J. -Y. Lee et al.

COMPOSITES PART B-ENGINEERING (2008)

Add to Collection

Article Engineering, Multidisciplinary

Effect of fibers on the bonds between FRP reinforcing bars and high-strength concrete

Jong-Pil Won et al.

COMPOSITES PART B-ENGINEERING (2008)

Add to Collection

Article Construction & Building Technology

Bond performances of FRP rebars-reinforced concrete

Maria Antonietta Aiello et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2007)

Add to Collection

Editorial Material Engineering, Civil

Discussion of Bond behavior of fiber reinforced polymer bars under direct pullout conditions by Zenon Achillides and Kypros Pilakoutas

HZ Wang

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2005)

Add to Collection

Article Engineering, Civil

Bond behavior of fiber reinforced polymer bars under direct pullout conditions

Z Achillides et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.