Related references
Note: Only part of the references are listed.Influence of specimen size on the mechanical properties of microlattices obtained by selective laser melting
Matteo Gavazzoni et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
The role of node fillet, unit-cell size and strut orientation on the fatigue strength of Ti-6Al-4V lattice materials additively manufactured via laser powder bed fusion
M. Dallago et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Multiaxial static strength of a 3D printed metallic lattice structure exhibiting brittle behavior
Matteo Gavazzoni et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
State-of-the-art in heat exchanger additive manufacturing
Inderjot Kaur et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Investigating the microstructure and mechanical behaviour of simulant lava-like fuel containing materials from the Chernobyl reactor unit 4 meltdown
C. Paraskevoulakos et al.
MATERIALS & DESIGN (2021)
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
M. Benedetti et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Deformation mechanisms and mechanical performances of architected mechanical metamaterials with gyroid topologies: Synchrotron X-ray radiation in-situ compression experiments and 3D image based finite element analysis
Wenxia Hu et al.
EXTREME MECHANICS LETTERS (2021)
Analysis of strain and stress concentrations in micro-lattice structures manufactured by SLM
Laura Boniotti et al.
RAPID PROTOTYPING JOURNAL (2020)
Synchrotron X-ray micro-computed tomography imaging of 3D re-entrant micro lattice during in situ micro compression experimental process
Wenwang Wu et al.
MATERIALS & DESIGN (2020)
Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering
Cambre N. Kelly et al.
ACTA BIOMATERIALIA (2019)
Damage characterizations and simulation of selective laser melting fabricated 3D re-entrant lattices based on in-situ CT testing and geometric reconstruction
Luchao Geng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Experimental and numerical investigation on compressive fatigue strength of lattice structures of AlSi7Mg manufactured by SLM
L. Boniotti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Imperfect architected materials: Mechanics and topology optimization
Damiano Pasini et al.
MRS BULLETIN (2019)
Digital Volume Correlation: Review of Progress and Challenges
A. Buljac et al.
EXPERIMENTAL MECHANICS (2018)
Elastically-isotropic truss lattice materials of reduced plastic anisotropy
Thomas Tancogne-Dejean et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Effect of SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical testing and digital volume correlation
Marta Peiia Fernandez et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Fatigue life of additively manufactured Ti6Al4V scaffolds under tension-tension, tension-compression and compression-compression fatigue load
Karel Lietaert et al.
SCIENTIFIC REPORTS (2018)
X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
Anton du Plessis et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
S. C. Wu et al.
ENGINEERING FRACTURE MECHANICS (2017)
Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading
Joep de Krijger et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting
Y. J. Liu et al.
ACTA MATERIALIA (2017)
On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Energy absorption in lattice structures in dynamics: Experiments
Zuhal Ozdemir et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Digital volume correlation can be used to estimate local strains in natural and augmented vertebrae: An organ-level study
Marco Palanca et al.
JOURNAL OF BIOMECHANICS (2016)
Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders
Sedat Ozbilen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Corner fatigue cracking behavior of hybrid laser AA7020 welds by synchrotron X-ray computed microtomography
S. C. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part I. Morphology
Nicola Vivienne Yorke Scarlett et al.
JOURNAL OF SYNCHROTRON RADIATION (2016)
Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects
Nicola Vivienne Yorke Scarlett et al.
JOURNAL OF SYNCHROTRON RADIATION (2016)
Fatigue behavior of IN718 microtrusses produced via additive manufacturing
Lena Huynh et al.
MATERIALS & DESIGN (2016)
Design of Highly Porous Hydroxyapatite Scaffolds by Conversion of 3D Printed Gypsum Structures - a Comparison Study
Alan C. S. Dantas et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography
Joel Lachambre et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Three-Dimensional Local Measurements of Bone Strain and Displacement: Comparison of Three Digital Volume Correlation Approaches
Marco Palanca et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
S. Amin Yavari et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: A literature review
Bryant C. Roberts et al.
JOURNAL OF BIOMECHANICS (2014)
Microdamage assessment of bone-cement interfaces under monotonic and cyclic compression
Gianluca Tozzi et al.
JOURNAL OF BIOMECHANICS (2014)
Fatigue behavior of porous biomaterials manufactured using selective laser melting
S. Amin Yavari et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis
K. Madi et al.
MEDICAL ENGINEERING & PHYSICS (2013)
Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting
S. J. Li et al.
ACTA MATERIALIA (2012)
Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images
Nathalie Limodin et al.
ACTA MATERIALIA (2009)
Three-dimensional image correlation from X-ray computed tomography of solid foam
Stephane Roux et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Methods and applications of digital volume correlation
B. K. Bay
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2008)
Multi-axial failure of metallic strut-lattice materials composed of short and slender struts
Mulalo Doyoyo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Computer-aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds
W Sun et al.
BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2004)
A unified periodical boundary conditions for representative volume elements of composites and applications
ZH Xia et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)