4.7 Article

Strain characteristics and energy dissipation laws of gas-bearing coal during impact fracture process

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

A new method for coal and gas outburst prediction and prevention based on the fragmentation of ejected coal

Chaolin Zhang et al.

Summary: Coal and gas outbursts in coal mines are serious disasters that threaten safety, with causes that are complex and methods of prediction and prevention still immature. This study conducted experiments to explore effective prediction and prevention measures, developed a new outburst risk assessment method, analyzed different risk levels, and proposed corresponding prevention methods, providing guidance for better preventing outbursts and ensuring safe coal-mine operations.
Article Geosciences, Multidisciplinary

Laboratory Investigations of a New Method Using Pressure Stimulated Currents to Monitor Concentrated Stress Variations in Coal

Dexing Li et al.

Summary: Frequent coal bumps during mining require monitoring stress variations, where researchers investigate a new method based on pressure stimulated current (PSC). Experiments show PSC is related to stress changes, with currents repeating during loading, maintaining load, and unloading. Results indicate PSC increases exponentially with loading rate and decreases proportionally to elastic modulus, offering new insights for predicting coal bumps.

NATURAL RESOURCES RESEARCH (2021)

Article Mechanics

Dynamics behaviour of gas-bearing coal subjected to SHPB tests

Xiangguo Kong et al.

Summary: Dynamic characteristics of gas-bearing coal samples were studied under different loading conditions during impact dynamics experiments. The results showed that loading conditions influenced the amplitude of reflected and transmission waves.

COMPOSITE STRUCTURES (2021)

Article Energy & Fuels

Modeling and experiment for effective diffusion coefficient of gas in water-saturated coal

Leilei Si et al.

Summary: An improved model was developed to calculate the effective diffusion coefficient of gas in a water-saturated coal core, providing more accurate results compared to traditional models. Experimental results also showed that as coal rank increases, saturated moisture and equilibrium moisture decrease, along with a shift in pore size dominance from micropore/mesopore-dominated to micropores-dominated.
Article Mechanics

Mechanical behavior and acoustic emission characteristics of intact granite undergoing direct shear

Delei Shang et al.

Summary: The shear behaviors of core samples from a deep geothermal exploration well were investigated using direct shear tests, and the fracturing process inside the intact rock samples during shear was monitored using acoustic emission (AE) technique. Three shear stages and three characteristic stresses were defined for the intact rock samples undergoing shear. Additionally, the different shear behaviors and AE characteristics between intact rocks and rock fractures were compared.

ENGINEERING FRACTURE MECHANICS (2021)

Article Engineering, Geological

Investigation on the fracture and mechanical behaviors of simulated transversely isotropic rock made of two interbedded materials

Peiwu Shen et al.

Summary: This study investigates the fracture and mechanical behaviors of interbedded rock through experimental analysis, revealing the significant influence of dip angle on crack types, failure modes, and mechanical parameters. The results are crucial for enhancing the qualitative instability analysis of bedded rock masses in the Miaowei Reservoir area of Yunnan Province.

ENGINEERING GEOLOGY (2021)

Article Engineering, Multidisciplinary

Fractal characteristics of acoustic emission of gas-bearing coal subjected to true triaxial loading

Ran Zhang et al.

Summary: This study focuses on the deformation characteristics and precursory information of coal and rock under true triaxial loading conditions. The experiments demonstrate the impact of gas pressure and confining stress on the deformation, failure, and fractal characteristics of coal. The dynamic changes in correlation dimension accurately reflect the damage evolution process of coal samples, providing valuable insights for preventing coal and rock gas dynamic disasters and reducing casualties and property loss in coal mines.

MEASUREMENT (2021)

Article Engineering, Geological

Experimental and numerical investigations on dynamic mechanical responses and failure process of gas-bearing coal under impact load

Xiangguo Kong et al.

Summary: The study investigated the failure process of gas-bearing coal in a complex mining environment, revealing the stress wave variations, stress-strain curves, and fracture evolution through experiments and numerical simulations. The experimental results validated the numerical simulation results, elucidating the formation of high stress areas and their impact on coal specimens.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

Article Engineering, Mechanical

Comparative study on fracture characteristics of coal and rock samples based on acoustic emission technology

Zhibo Zhang et al.

Summary: This study focuses on improving the effectiveness and accuracy of acoustic monitoring method in coal resource mining by conducting AE event location experiments on coal and rock samples under uniaxial loading. The research reveals the impact of changing parameters on the damage state of coal and rock samples, showing significant variations before buckling failure. This provides a new method to evaluate the damage state of coal and rock mass under high stress, with important implications for ensuring safety in coal resource mining.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Article Energy & Fuels

Adsorption and diffusion characteristics of CH4, CO2, and N2 in micropores and mesopores of bituminous coal: Molecular dynamics

Hang Long et al.

Summary: The research found that with the increase of pore size, the gas loading amount in the pore model increased, but the tight adsorption amount and adsorption heat decreased. The order of CO2 > CH4 > N2 is the arrangement order of tight adsorption amount, loading amount and adsorption heat. The diffusion characteristics of the three gases in the pores are CH4 > N2 > CO2, and larger pores are more conducive to gas diffusion.
Article Geosciences, Multidisciplinary

Experimental Study on the Response Characteristics of the Apparent Resistivity of Rock True Triaxial Hydraulic Fracturing

Nan Li et al.

Summary: The study found that the combined action of hydraulic cracks and fracturing water is the decisive factor influencing the change in apparent resistivity, and the initiation sequence and spatial location of cracks can be intuitively reflected through the characteristics of resistivity.

NATURAL RESOURCES RESEARCH (2021)

Article Engineering, Mechanical

Rockburst mechanism in coal rock with structural surface and the microseismic (MS) and electromagnetic radiation (EMR) response

Xuelong Li et al.

Summary: This paper establishes an elastic-plastic-brittle mutation rockburst model for coal rock with structural surface, and researches the energy accumulation and dissipation mechanism during dynamic deformation and rupture to obtain the rockburst energy condition. Additionally, a volume element-region-system model of rockburst is established to explain the evolution process. The analysis of microseismic and electromagnetic radiation characteristics of coal rock provides a deeper understanding of the rockburst mechanism for accurate monitoring and early warning.

ENGINEERING FAILURE ANALYSIS (2021)

Article Engineering, Geological

Permeability enhancement and porosity change of coal by liquid carbon dioxide phase change fracturing

Xianfeng Liu et al.

Summary: The liquid carbon dioxide phase change fracturing technology can effectively increase coal permeability, with the impact decreasing as the distance from the fracturing borehole increases. The influence of LCPCF on coal can be divided into three stages based on distance, with the greatest impact observed within 1.0 m and diminishing effects at distances greater than 6.0 m.

ENGINEERING GEOLOGY (2021)

Article Mechanics

High-pressure methane adsorption behavior on deep shales: Experiments and modeling

Weijun Shen et al.

Summary: The study found that methane adsorption on deep shales is influenced by various factors, including total organic carbon content, temperature, clay minerals, and moisture content. The TOC content is positively correlated with methane adsorption capacity, while the clay mineral content is negatively correlated. Increasing temperature decreases methane adsorption capacity, but the trend may reverse at certain pressures. The presence of moisture significantly reduces methane adsorption on deep shales, with the reduction in adsorption capacity decreasing as pressure increases.

PHYSICS OF FLUIDS (2021)

Article Engineering, Geological

Dynamic Compressive Test of Gas-Containing Coal Using a Modified Split Hopkinson Pressure Bar System

Zhiqiang Yin et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Article Engineering, Geological

Deterministic seismic hazard assessment of coal fractures in underground coal mine: A case study

Junjun Feng et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Article Engineering, Mechanical

Dynamic mechanical characteristics and fracture mechanism of gas-bearing coal based on SHPB experiments

Xiangguo Kong et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

Article Mathematics, Interdisciplinary Applications

EXPERIMENTAL INVESTIGATION ON MULTI-FRACTAL CHARACTERISTICS OF ACOUSTIC EMISSION OF COAL SAMPLES SUBJECTED TO TRUE TRIAXIAL LOADING-UNLOADING

Ran Zhang et al.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2020)

Article Engineering, Geological

Early-warning of rock burst in coal mine by low-frequency electromagnetic radiation

Liming Qiu et al.

ENGINEERING GEOLOGY (2020)

Article Mining & Mineral Processing

Experimental and numerical study of failure behavior and mechanism of coal under dynamic compressive loads

Junjun Feng et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Geological

Mining-triggered seismicity governed by a fold hinge zone: The Upper Silesian Coal Basin, Poland

Maciej Jan Mendecki et al.

ENGINEERING GEOLOGY (2020)

Article Engineering, Geological

An experimental study on fracture evolution mechanism of a non-persistent jointed rock mass with various anchorage effects by DSCM, AE and X-ray CT observations

Sheng-Qi Yang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Article Mining & Mineral Processing

Understanding roof deformation mechanics and parametric sensitivities of coal mine entries using the discrete element method

Rami Abousleiman et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Mathematics, Interdisciplinary Applications

FRACTALS AND CHAOS CHARACTERISTICS OF ACOUSTIC EMISSION ENERGY ABOUT GAS-BEARING COAL DURING LOADED FAILURE

Xiangguo Kong et al.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2019)

Article Engineering, Mechanical

Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test

Dihao Ai et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Review Engineering, Multidisciplinary

Theoretical Progress and Key Technologies of Onshore Ultra-Deep Oil/Gas Exploration

Xusheng Guo et al.

ENGINEERING (2019)

Article Geochemistry & Geophysics

Test of a liquid directional roof-cutting technology for pressure-relief entry retaining mining

Yajun Wang et al.

JOURNAL OF GEOPHYSICS AND ENGINEERING (2019)

Article Geosciences, Multidisciplinary

The use of AFM in quantitative analysis of pore characteristics in coal and coal-bearing shale

Xianfeng Liu et al.

MARINE AND PETROLEUM GEOLOGY (2019)

Article Engineering, Industrial

Research on effect of gas pressure in the development process of gassy coal extrusion

Zhanyou Sa et al.

SAFETY SCIENCE (2019)

Article Mechanics

Effect of crack angles on energy characteristics of sandstones under a complex stress path

Peng Kang et al.

ENGINEERING FRACTURE MECHANICS (2019)

Article Geosciences, Multidisciplinary

Dynamic Failure Properties of Sandstone Under Radial Gradient Stress and Cyclical Impact Loading

Shi-ming Wang et al.

FRONTIERS IN EARTH SCIENCE (2019)

Article Engineering, Geological

Acoustic emission based mechanical behaviors of Beishan granite under conventional triaxial compression and hydro-mechanical coupling tests

H. W. Zhou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Article Construction & Building Technology

Experimental investigation of the dynamic response of prestressed rockbolt by using an SHPB-based rockbolt test system

Qiuhong Wu et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Article Engineering, Mechanical

Three-dimensional DEM investigation of the fracture behaviour of thermally degraded rocks with consideration of material anisotropy

Junlong Shang et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

Article Engineering, Geological

Multi-jointed stratified hard rock roof analysis and design

Paraskevi Yiouta-Mitra et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

Article Energy & Fuels

Effects of gas pressure on bursting liability of coal under uniaxial conditions

Xiaofei Liu et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2017)

Article Mining & Mineral Processing

Effects of coal damage on permeability and gas drainage performance

Zheng Chunshan et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Geological

Changes in Frequency of Electromagnetic Radiation from Loaded Coal Rock

Dazhao Song et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Article Engineering, Geological

Thrust fault nucleation due to heterogeneous bedding plane slip: Evidence from an Ohio coal mine

Ciel Elizalde et al.

ENGINEERING GEOLOGY (2016)

Article Energy & Fuels

The Modeling and Projection of Primary Energy Consumption by the Sources

G. Aydin

ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY (2015)

Article Energy & Fuels

The Application of Trend Analysis for Coal Demand Modeling

G. Aydin

ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY (2015)

Article Energy & Fuels

Production Modeling in the Oil and Natural Gas Industry: An Application of Trend Analysis

G. Aydin

PETROLEUM SCIENCE AND TECHNOLOGY (2014)

Article Engineering, Mechanical

Evaluation of stress-strain curve estimates in dynamic experiments

Dirk Mohr et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)