Related references
Note: Only part of the references are listed.Modeling and simulation analysis of methanol conversion to olefins (MTO): A critical comparison of a honeycomb monolith and a fixed-bed of cylindrical extruded HZSM-5 catalyst
Neda Zergani et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)
Particle-scale evaluation of the pyrolysis process of biomass material in a reactive gas-solid spouted reactor
Shiliang Yang et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Dynamical and thermal property of rising bubbles in the bubbling fluidized biomass gasifier with wide particle size distribution
Shiliang Yang et al.
APPLIED ENERGY (2020)
Analysis of China's olefin industry using a system optimization model considering technological learning and energy consumption reduction
Zhongming Xu et al.
ENERGY (2020)
Possibilities and Limits of Computational Fluid Dynamics-Discrete Element Method Simulations in Process Engineering: A Review of Recent Advancements and Future Trends
Paul Kieckhefen et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 11 (2020)
Long-time simulation of catalytic MTO reaction in a fluidized bed reactor with a coarse-grained discrete particle method - EMMS-DPM
Xingchi Liu et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Single-event kinetic model for methanol-to-olefins (MTO) over ZSM-5: Fundamental kinetics for the olefin co-feed reactivity
Sebastian Standl et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Influence of size-induced segregation on the biomass gasification in bubbling fluidized bed with continuous lognormal particle size distribution
Shiliang Yang et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Simulation of a large methanol-to-olefins fluidized bed reactor with consideration of coke distribution
Jingyuan Zhang et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Numerical simulation of scale-up effects of methanol-to-olefins fluidized bed reactors
Bona Lu et al.
CHEMICAL ENGINEERING SCIENCE (2017)
CPFD simulations of an industrial-sized dual fluidized bed steam gasification system of biomass with 8 MW fuel input
Stephan Kraft et al.
APPLIED ENERGY (2017)
Experimental study on the characteristic mixing time of solids and its link with the lateral dispersion coefficient in bubbling fluidized beds
J. Sanchez-Prieto et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Filtered model for the cold-model gas-solid flow in a large-scale MTO fluidized bed reactor
Li-Tao Zhu et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Speeding up CFD simulation of fluidized bed reactor for MTO by coupling CRE model
Bona Lu et al.
CHEMICAL ENGINEERING SCIENCE (2016)
CFD simulation of dense particulate reaction system: Approaches, recent advances and applications
Wenqi Zhong et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Application of Filtered Model for Reacting Gas Solid Flows and Optimization in a Large-Scale Methanol-to-Olefin Fluidized-Bed Reactor
Li-Tao Zhu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
A seven lumped kinetic model for industrial catalyst in DMTO process
Lei Ying et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
LES and RANS of air and oxy-coal combustion in a pilot-scale facility: Predictions of radiative heat transfer
Alastair G. Clements et al.
FUEL (2015)
Methanol to Olefins (MTO): From Fundamentals to Commercialization
Peng Tian et al.
ACS CATALYSIS (2015)
CFD-DEM modeling of gas-solid flow and catalytic MTO reaction in a fluidized bed reactor
Ya-Qing Zhuang et al.
COMPUTERS & CHEMICAL ENGINEERING (2014)
A critical validation study on CPFD model in simulating gas-solid bubbling fluidized beds
Yongshi Liang et al.
POWDER TECHNOLOGY (2014)
CFD simulations of circulating fluidized bed risers, part II, evaluation of differences between 2D and 3D simulations (Reprinted from Powder Technology, vol 254, pg 115-124, 2014)
Tingwen Li et al.
POWDER TECHNOLOGY (2014)
CFD modelling of the hydrodynamics and kinetic reactions in a fluidised-bed MTO reactor
Jian Chang et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)
3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor
Yinfeng Zhao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Investigations on heat transfer and hydrodynamics under pyrolysis conditions of a pilot-plant draft tube conical spouted bed reactor
J. Makibar et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)
Comparison between two-fluid model simulations and particle image analysis & velocimetry (PIV) results for a two-dimensional gas-solid fluidized bed
F. Hernandez-Jimenez et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Eulerian-Lagrangian method for three-dimensional thermal reacting flow with application to coal gasifiers
Dale M. Snider et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Lateral solids dispersion coefficient in large-scale fluidized beds
Daoyin Liu et al.
COMBUSTION AND FLAME (2010)
Particle Scale Study of Heat Transfer in Packed and Bubbling Fluidized Beds
Z. Y. Zhou et al.
AICHE JOURNAL (2009)
Numerical Simulation of Dense Gas-Solid Fluidized Beds: A Multiscale Modeling Strategy
M.A. van der Hoef et al.
Annual Review of Fluid Mechanics (2008)
Effects of using two- versus three-dimensional computational modeling of fluidized beds - Part I, hydrodynamics
Nan Xie et al.
POWDER TECHNOLOGY (2008)
An incompressible three-dimensional multiphase particle-in-cell model for dense particle flows
DM Snider
JOURNAL OF COMPUTATIONAL PHYSICS (2001)