4.7 Article

Synthesis of graphene oxide nanoparticles and the influences of their usage as fuel additives on CI engine behaviors

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Forecasting of transportation-related energy demand and CO2 emissions in Turkey with different machine learning algorithms

Umit Agbulut

Summary: The study forecasts CO2 emissions and energy demand in Turkey's transportation sector using machine learning algorithms, showing significant increases in both by 2050. The paper emphasizes the need for policymakers to establish various measures and challenges to mitigate energy consumption and emissions from the transportation sector.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2022)

Article Thermodynamics

Influence of Al2O3nano additives in ternary fuel (diesel-biodiesel-ethanol) blends operated in a single cylinder diesel engine: Performance, combustion and emission characteristics

Harish Venu et al.

Summary: The research shows that adding 20 ppm alumina nano additive in ternary fuel blend can enhance engine performance and combustion efficiency, while reducing exhaust emissions.

ENERGY (2021)

Article Thermodynamics

Exergetic and exergoeconomic analyses of a CI engine fueled with diesel-biodiesel blends containing various metal-oxide nanoparticles

Mustafa Karagoz et al.

Summary: In this study, comprehensive exergetic and exergoeconomic analyses were conducted on a single-cylinder, four-stroke diesel engine. Different nanofuels were tested at varying engine loads, with D90B10Al(2)O(3) showing the highest exergy efficiency and sustainability index values. Al2O3-doped nanofuel emerged as the best test fuel in terms of exergy, exergoeconomics, and sustainability analyzes.

ENERGY (2021)

Article Environmental Sciences

Novel environmentally friendly fuel: The effect of adding graphene quantum dot (GQD) nanoparticles with ethanol-biodiesel blends on the performance and emission characteristics of a diesel engine

Aram Heidari-Maleni et al.

Summary: The study found that adding GQD + E to B10 fuel improved torque and power of the engine while reducing SFC, CO, UHC, and NOx emissions. The fuel blend of B10 + E6 + GQD90 performed the best in terms of engine performance enhancement and exhaust emission reduction.

NANOIMPACT (2021)

Article Thermodynamics

Analysis of thermal performance of an improved shell and helically coiled heat exchanger

Azim Dogus Tuncer et al.

Summary: A new modification involving the integration of a hollow tube for cold fluid inlet was proposed to enhance the performance of a shell and helically coiled heat exchanger. The modified heat exchanger design successfully regulated fluid flow, improving heat transfer efficiency. The experimental results showed an average difference of 8% between simulation and actual performance, with overall heat transfer coefficients ranging from 1600-3150 W/m(2)K for the shell side, and 5700-13,400 W/m(2)K for the coil side.

APPLIED THERMAL ENGINEERING (2021)

Article Energy & Fuels

Effects of adding aluminum oxide nanoparticles to butanol-diesel blends on performance, particulate matter, and emission characteristics of diesel engine

Mohammed A. Fayad et al.

Summary: By adding different concentrations of Al2O3 nanoparticles to B20, it can increase cylinder pressure and rate of heat release, reduce fuel consumption, increase thermal efficiency, decrease particulate matter and emissions.
Article Energy & Fuels

Effect of CuO nanoparticles concentration on the performance and emission characteristics of the diesel engine running on jojoba (Simmondsia Chinensis) biodiesel

Pankaj Mohan Rastogi et al.

Summary: This study investigates the effects of CuO nanoparticles on the performance, emissions, and combustion characteristics of a diesel engine running on jojoba biodiesel blend (JB20). The results show that the addition of CuO nanoparticles to JB20 fuel can increase fuel thermal efficiency and reduce emissions.
Article Energy & Fuels

Experimental evaluation of diesel engine powered with waste mango seed biodiesel at different injection timings and EGR rates

S. Rami Reddy et al.

Summary: The experimentation shows that using advanced fuel injection timing can significantly improve the efficiency of a diesel engine and reduce emissions, especially under full load conditions. Additionally, the addition of moderate Exhaust Gas Recirculation (EGR) can significantly reduce NOX emissions without compromising engine performance.
Article Green & Sustainable Science & Technology

Electricity production based forecasting of greenhouse gas emissions in Turkey with deep learning, support vector machine and artificial neural network algorithms

Melahat Sevgul Bakay et al.

Summary: This paper aims to forecast GHG emissions from the electricity production sector in Turkey using DL, SVM, and ANN algorithms. The results show that all algorithms used in the study give satisfying results for the forecasting of GHG emissions in Turkey. The forecasting results indicate a high R-2 value for the emissions ranging from 0.861 to 0.998, categorized as excellent in terms of rRMSE, with all values below 10%.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Thermodynamics

Experimental investigations on diesel engine using alumina nanoparticle fuel additive

Mohammed S. Gad et al.

Summary: Experimental work showed that adding 40 ppm alumina nanoparticles to diesel fuel can enhance thermal efficiency, reduce specific fuel consumption, and decrease emissions of smoke, HC, CO, and NOX. The addition of nanoparticles also improved fuel stability and prevented atomization problems and injector clogging.

ADVANCES IN MECHANICAL ENGINEERING (2021)

Article Thermodynamics

Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics

Umit Agbulut et al.

Summary: The addition of CuO nanoparticles to diesel fuel can improve combustion efficiency, reduce emissions, increase fuel heating value, decrease fuel consumption, and enhance thermal efficiency. CuO additives lead to lower CO, HC, and NOx emissions, along with improved combustion characteristics and engine performance.

ENERGY (2021)

Article Green & Sustainable Science & Technology

Performance enhancement of a greenhouse dryer: Analysis of a cost-effective alternative solar air heater

Ataollah Khanlari et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Chemistry, Physical

Graphene oxide coated flower-shaped ZnO nanorods: Optoelectronic properties

I. Boukhoubza et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Green & Sustainable Science & Technology

Energy, exergy, economic and sustainability assessments of a compression ignition diesel engine fueled with tire pyrolytic oil - diesel blends

Mustafa Karagoz et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Biochemistry & Molecular Biology

Solar-driven water-splitting provides a solution to the energy problem underpinning climate change

James Barber

BIOCHEMICAL SOCIETY TRANSACTIONS (2020)

Article Thermodynamics

An experimental investigation into engine characteristics fueled with Lal ambari biodiesel and its blends

Pankaj Shrivastava et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)

Article Biotechnology & Applied Microbiology

Commercial diesel application scenario and potential of alternative biodiesel from waste chicken skin in Bangladesh

Pranta Barua et al.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Article Green & Sustainable Science & Technology

Testing of a novel convex-type solar absorber drying chamber in dehumidification process of municipal sewage sludge

Azim Dogus Tuncer et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Multidisciplinary Sciences

Enhancing the Impact of Biodiesel Blend on Combustion, Emissions, and Performance of DI Diesel Engine

E. A. Elsharkawy et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Article Engineering, Chemical

Mechanical and corrosion properties of brass exposed to waste sunflower oil biodiesel-diesel fuel blends

Olusegun David Samuel et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2019)

Article Engineering, Mechanical

Experimental investigation of combustion, performance and emission characteristics of a diesel engine fuelled with diesel-biodiesel-alcohol blends

Umit Agbulut et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Article Thermodynamics

Investigation on diethyl ether as an additive with Calophyllum Inophyllum biodiesel for CI engine application

K. Nanthagopal et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Energy & Fuels

Adapted hyacinth briquetting machine for mass production of briquettes

Modestus O. Okwu et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Article Energy & Fuels

Effect of nanoparticle on emission and performance characteristics of a diesel engine fueled with cashew nut shell biodiesel

Santhanakrishnan Radhakrishnan et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Article Multidisciplinary Sciences

Differential cytotoxic effects of graphene and graphene oxide on skin keratinocytes

Marco Pelin et al.

SCIENTIFIC REPORTS (2017)

Article Thermodynamics

Novel technique for enhancement of diesel fuel: Impact of aqueous alumina nano-fluid on engine's performance and emissions

Miqdam Tariq Chaichan et al.

CASE STUDIES IN THERMAL ENGINEERING (2017)

Article Green & Sustainable Science & Technology

Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends

Seyyed Hassan Hosseini et al.

RENEWABLE ENERGY (2017)

Article Materials Science, Multidisciplinary

Oxidation of graphite by different modified Hummers methods

Roksana Muzyka et al.

NEW CARBON MATERIALS (2017)

Article Medicine, General & Internal

Air pollution—crossing borders

The Lancet

LANCET (2016)

Article Energy & Fuels

Nanofuels: Combustion, engine performance and emissions

Rakhi N. Mehta et al.

Article Spectroscopy

Graphene oxide and reduced graphene oxide studied by the XRD, TEM and electron spectroscopy methods

L. Stobinski et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2014)

Article Thermodynamics

Effect of Ferrofluid on the Performance and Emission Patterns of a Four-Stroke Diesel Engine

M. B. Shafii et al.

ADVANCES IN MECHANICAL ENGINEERING (2011)

Article Chemistry, Multidisciplinary

Improved Synthesis of Graphene Oxide

Daniela C. Marcano et al.

ACS NANO (2010)

Article Thermodynamics

Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine

Cenk Sayin et al.

ENERGY CONVERSION AND MANAGEMENT (2009)

Review Thermodynamics

Metal particle combustion and nanotechnology

Richard A. Yetter et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Article Thermodynamics

Effect of exhaust gas recirculation on some combustion characteristics of dual fuel engine

MYE Selim

ENERGY CONVERSION AND MANAGEMENT (2003)