☆ 4.6 Article

Designing on solvent composition of dual-salt low concentration electrolyte for inhibiting lithium dendrite growth at-20?

ELECTROCHIMICA ACTA (2022)

Related references

Note: Only part of the references are listed.

Article Electrochemistry

The effect of ionic liquid-based electrolytes for dendrite-inhibited and performance-boosted lithium metal batteries

Kun Yue et al.

Summary: The study demonstrates that IL-based additives significantly improve the electrochemical performance of Lithium metal batteries, enhancing cycle number and stability, suppressing Li dendrites growth, and providing important strategies for future development of high performance LMBs.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Applied

Low-temperature Li-S batteries enabled by all amorphous conversion process of organosulfur cathode

Zhenkang Wang et al.

Summary: A sulfur-rich polymer was fabricated to improve the performance of Li-S batteries at low temperatures by enabling discharging intermediates to exist in an amorphous state. The cathode material exhibits excellent performance even at extremely low temperature, with the discharge capacity remaining around 67% of that at room temperature.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Electrochemistry

Diphenyl diselenide as a bifunctional electrolyte additive in a high-voltage LiNi0.8Mn0.1Co0.1O2/graphite battery

Geumyong Park et al.

Summary: Developing a novel electrolyte additive is crucial to enhance the stability of the electrolyte/electrode interface for high-nickel cathode materials. In this study, diphenyl diselenide (DPDS) was used as a bifunctional electrolyte additive for high-voltage LiNi0.8Mn0.1Co0.1O2 (NMC811)/graphite batteries. DPDS forms protective layers on electrode surfaces to prevent parasitic reactions, maintain electrode structural stability, and reduce active lithium loss, resulting in improved capacity retention.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Electrochemistry

Physical properties and compatibility with graphite and lithium metal anodes of non-flammable deep eutectic solvent as a safe electrolyte for high temperature Li-ion batteries

Joseph Chidiac et al.

Summary: This study presents an original formulation of a deep eutectic electrolyte based on lithium imide salt, which shows good safety and stability as an electrolyte for Li-ion batteries. The electrolyte exhibits characteristics similar to ionic liquids or deep eutectic solvents, with good transport properties and compatibility with lithium metal and graphite.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Review Chemistry, Applied

Recent progress on the recycling technology of Li-ion batteries

Yuqing Wang et al.

Summary: This review comprehensively summarizes the recycling technologies for LiNixCoyMnzO2 and LiFePO4-based LIBs, as well as exhausted anode materials, and discusses the challenges and possible strategies for industrial-scale application. The closed-loop strategy for cycling cathode materials is highlighted as an ideal approach for its economic benefit and environmental friendliness.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Electrochemistry

A safe electrolyte for high-performance lithium-ion batteries containing lithium difluoro(oxalato)borate, gamma-butyrolactone and non-flammable hydrofluoroether

Yixuan Gu et al.

Summary: This study introduces a safe lithium electrolyte in a mixture of gamma-butyrolactone and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether, demonstrating higher safety and better performance compared to a commercial electrolyte. The electrolyte shows a conductivity of 7.12 mS cm(-1) at 25 degrees C and exhibits outstanding electrochemical performance and cycling stability.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Multidisciplinary Sciences

Understanding Li-based battery materials via electrochemical impedance spectroscopy

Miran Gaberscek

Summary: Electrochemical impedance spectroscopy is a crucial technique for understanding Li-based battery processes, with untapped potential for comprehending battery storage mechanisms. While traditionally considered as a supplementary tool, the application of EIS should be enhanced through improved experimental design and advanced data analysis techniques.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Energy & Fuels

Tailoring electrolyte solvation for Li metal batteries cycled at ultra-low temperature

John Holoubek et al.

Summary: This study highlights the importance of the solvation structure of the electrolyte in charge-transfer behavior at ultra-low temperatures for lithium metal batteries. By designing an electrolyte to enable low-temperature operations, stable performance and high efficiency can be achieved for Li-metal batteries.

NATURE ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Novel Low-Temperature Electrolyte Using Isoxazole as the Main Solvent for Lithium-Ion Batteries

Sha Tan et al.

Summary: A novel electrolyte system with improved low-temperature performance for lithium-ion batteries has been developed by utilizing isoxazole as the main solvent, resulting in significantly higher ionic conductivity and reversible capacity at -20 degrees C.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

An acetamide additive stabilizing ultra-low concentration electrolyte for long-cycling and high-rate sodium metal battery

Rui Jiang et al.

Summary: A new additive, BSTFA, is introduced in this study to stabilize the electrolyte and fabricate a highly conductive interface in sodium metal batteries, improving their performance.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Lithium Metal Batteries Enabled by Synergetic Additives in Commercial Carbonate Electrolytes

Nan Piao et al.

Summary: By introducing lithium nitrate (LiNO3) and fluoroethylene carbonate (FEC) into commercial 1 M LiPF6/EC-DMC electrolytes, an inorganic-enhanced LiF-Li3N SEI was designed to improve the Li plating/stripping Coulombic efficiency to 99.6% in 100 cycles. This strategy enabled a lithium metal anode cell to achieve an average CE of 99.7% and a capacity retention of 90.8% after 150 cycles, demonstrating high performance in commercial carbonate electrolytes.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Ion Repulsion-Enrichment Synergism Induced by Core-Shell Ionic Complexes to Enable High-Loading Lithium Metal Batteries

Junwei Meng et al.

Summary: The study introduces a core-shell additive to stabilize Li-metal batteries, enhancing cycle life and performance at high current densities.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Anion-Derived Solid Electrolyte Interphase in Lithium Metal Batteries

Tao Li et al.

Summary: By regulating the electrolyte structure of anions using TPFPB anion acceptors, a stable anion-derived SEI was constructed to improve the stability and cycling performance of lithium metal batteries under practical conditions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Engineering, Environmental

High performance of low-temperature electrolyte for lithium-ion batteries using mixed additives

Weixia Lv et al.

Summary: In this study, both the solvent and lithium salt were modified to enhance the low temperature performance of the electrolyte. The mixed additives of BA + EC + LBF were found to improve the capacity and voltage platform of the batteries at low temperatures by forming a thin LiF film on the cathode surface.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Insight into wide temperature electrolyte based on lithiumdifluoro (oxalate)borate for high voltage lithium-ion batteries

Hongxia Chen et al.

Summary: The study confirms that the electrochemical performance of LNMO cathode with high voltage plateau can be significantly improved at low and high temperatures by adding lithium difluorophosphate (LiDFP) and dimethyl sulfite (DMS) as electrolyte additives. The enhanced performance is mainly attributed to the priority oxidation decomposition of LiDFP and the increased ionic conductivity of DMS-containing electrolytes at low temperature.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Electrochemistry

Transport Phenomena in Low Temperature Lithium-Ion Battery Electrolytes

Alexandra J. Ringsby et al.

Summary: The main factor affecting low temperature transport in LP57 is solvent viscosity, not ion aggregation or cation transference number. Ion aggregation decreases with decreasing temperature, while cation transference number is positive and roughly independent of temperature.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Unraveling the mechanical origin of stable solid electrolyte interphase

Yao Gao et al.

Summary: The capability of a solid electrolyte interphase (SEI) in accommodating deformation is critical to electrode integrity. A new indicator, maximum elastic deformation energy (U), is proposed to predict SEI stability and screen suitable electrolytes for different anodes. The study demonstrates a feasible atomic force microscopy-based nanoindentation test to accurately determine the mechanical parameters of SEI.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

C-F-rich oil drop as a non-expendable fluid interface modifier with low surface energy to stabilize a Li metal anode

Qifan Yang et al.

Summary: A strategy for modifying the lithium metal anode with a non-expendable fluid interface is proposed to protect the anode from side reactions with the electrolyte, thus enhancing the commercial potential of lithium metal batteries. This study provides a novel route to high-performance lithium metal batteries based on immiscible liquid interlayers.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Glycolide additives enrich organic components in the solid electrolyte interphase enabling stable ultrathin lithium metal anodes

Xin-Meng Wang et al.

Summary: The study demonstrates that the addition of glycolide (GL) electrolyte additive can prolong the cycle life of ultrathin Li metal anodes and improve the uniformity of Li deposition.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Chemistry, Physical

From-20 °C to 150 °C: a lithium secondary battery with a wide temperature window obtained via manipulated competitive decomposition in electrolyte solution

Tianle Zheng et al.

Summary: The use of adiponitrile (ADN) has been shown to improve the performance of lithium secondary batteries (LSBs) over a wide temperature range, offering higher coulombic efficiency at high temperatures and more stable cycling performance.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling High-Voltage Lithium Metal Batteries by Manipulating Solvation Structure in Ester Electrolyte

Yulin Jie et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Chemistry, Applied

Rational design on separators and liquid electrolytes for safer lithium-ion batteries

Mengqi Yuan et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

An All-Fluorinated Ester Electrolyte for Stable High-Voltage Li Metal Batteries Capable of Ultra-Low-Temperature Operation

John Holoubek et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Efficient Low-Temperature Cycling of Lithium Metal Anodes by Tailoring the Solid-Electrolyte Interphase

Akila C. Thenuwara et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Chemistry, Physical

Thermodynamic Understanding of Li-Dendrite Formation

Xiangwen Gao et al.

JOULE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanism of Stability Enhancement for Adiponitrile High Voltage Electrolyte System Referring to Addition of Fluoroethylene Carbonate

Zhao Fang et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Beyond the concentrated electrolyte: further depleting solvent molecules within a Li+ solvation sheath to stabilize high-energy-density lithium metal batteries

Zhi Chang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An ester electrolyte for lithium-sulfur batteries capable of ultra-low temperature cycling

Guorui Cai et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Non-bonded force field model with advanced restrained electrostatic potential charges (RESP2)

Michael Schauperl et al.

COMMUNICATIONS CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Cu coated soft fabric as anode for lithium metal batteries

Luhan Ye et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Energy Rechargeable Metallic Lithium Battery at-70°C Enabled by a Cosolvent Electrolyte

Xiaoli Dong et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Liquid Polydimethylsiloxane Grafting to Enable Dendrite-Free Li Plating for Highly Reversible Li-Metal Batteries

Junwei Meng et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Improving cyclability of Li metal batteries at elevated temperatures and its origin revealed by cryo-electron microscopy

Jiangyan Wang et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Synergistic effect of fluoroethylene carbonate and lithium difluorophosphate on electrochemical performance of SiC-based lithium-ion battery

Xiangzhen Zheng et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Distinct Nanoscale Interphases and Morphology of Lithium Metal Electrodes Operating at Low Temperatures

Akila C. Thenuwara et al.

NANO LETTERS (2019)

Add to Collection

Article Energy & Fuels

All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents

Xiulin Fan et al.

NATURE ENERGY (2019)

Add to Collection

Article Electrochemistry

High-Voltage LiNi0.5Mn1.5O4 Cathode Stability of Fluorinated Ether Based on Enhanced Separator Wettability

Hao Zheng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Stable Lithium Metal Batteries Enabled by Regulating the Solvation of Lithium Ions in Nonaqueous Electrolytes

Xue-Qiang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A promising bulky anion based lithium borate salt for lithium metal batteries

Lixin Qiao et al.

CHEMICAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

High-Efficiency Lithium Metal Batteries with Fire-Retardant Electrolytes

Shuru Chen et al.

JOULE (2018)

Add to Collection

Article Chemistry, Physical

γ-butyrolactone and glutaronitrile as 5 V electrolyte additive and its electrochemical performance for LiNi0.5Mn1.5O4

Yun Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Elucidation of transport mechanism and enhanced alkali ion transference numbers in mixed alkali metal-organic ionic molten salts

Fangfang Chen et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Chemistry, Physical

Synthesis and Characterization of Lithium Bis( fluoromalonato) borate for Lithium-Ion Battery Applications

Chen Liao et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Electrochemical performances of a novel high-voltage electrolyte based upon sulfolane and γ-butyrolactone

Xiaoling Cui et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Multiwfn: A multifunctional wavefunction analyzer

Tian Lu et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2012)

Add to Collection

Article Electrochemistry

GBL-based electrolyte for Li-ion battery: thermal and electrochemical performance

Dmitry Belov et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)

Add to Collection

Article Chemistry, Physical

Conformational effects, molecular orbitals, and reaction activities of bis(phthalocyaninato) lanthanum double-deckers: Density functional theory calculations

Dongdong Qi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

Add to Collection

Article Chemistry, Physical

Study on γ-butyrolactone for LiBOB-based electrolytes

Jia-yuan Huang et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

Article Chemistry, Physical

Canonical sampling through velocity rescaling

Giovanni Bussi et al.

JOURNAL OF CHEMICAL PHYSICS (2007)

Add to Collection

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.