Related references
Note: Only part of the references are listed.The relationship between inclusions characteristic parameters and bending fatigue performance of 20Cr2Ni4A gear steel
Zhiyuan Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Sensitivity of additively manufactured AA7075 to variation in feedstock composition and print parameters
Kasra Momeni
JOURNAL OF MANUFACTURING PROCESSES (2022)
Roughness and Near-Surface Porosity of Unsupported Overhangs Produced by High-Speed Laser Powder Bed Fusion
Mfanufikile Shange et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2022)
VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4
Florian Himmelbauer et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Role of melt flow dynamics on track surface morphology in the L -PBF additive manufacturing process
Arvind Chouhan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
The Effect of PostProcessing on the Ductility and Strength of Ti-6Al-4V Lattice Materials
X. Z. Zhang et al.
JOM (2021)
Visualisation and numerical analysis of laser powder bed fusion under cross-flow
I Bitharas et al.
ADDITIVE MANUFACTURING (2021)
Hybrid dual laser processing for improved quality of inclined up-facing surfaces in laser powder bed fusion of metals
Jitka Metelkova et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Scanning strategy in selective laser melting (SLM): a review
Haolin Jia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Use of 450-808 nm diode lasers for efficient energy absorption during powder bed fusion of Ti6Al4V
Mohammed Alsaddah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Fatigue Failure from Inner Surfaces of Additive Manufactured Ti-6Al-4V Components
Joel de Jesus et al.
MATERIALS (2021)
Fatigue strength estimation methodology of additively manufactured metallic bulk material
W. Schneller et al.
ADDITIVE MANUFACTURING (2021)
A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies
Mohamad Bayat et al.
ADDITIVE MANUFACTURING (2021)
Dual-beam laser-matter interaction at overlap region during multi-laser powder bed fusion manufacturing
Jie Yin et al.
ADDITIVE MANUFACTURING (2021)
Reduction of incandescent spatter with helium addition to the process gas during laser powder bed fusion of Ti-6Al-4V
C. Pauzon et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0?, 15?, 45? and 90? building directions
Zhongwei Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of the fabricating locations and orientations according to the powder coating direction in Selective Laser Melting on mechanical properties
Snehashis Pal et al.
RESULTS IN PHYSICS (2021)
Defect analysis and fatigue strength prediction of as-built Ti6Al4V parts, produced using electron beam melting (EBM) AM technology
Md Jamal Mian et al.
MATERIALIA (2021)
A DEM study of powder spreading in additive layer manufacturing
Yahia M. Fouda et al.
GRANULAR MATTER (2020)
Novel specimen geometries for fatigue testing of additive manufactured metals under axial, torsion, and combined axial-torsion loadings
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion
Haopeng Shen et al.
JOM (2020)
Fatigue Performance of Additively Manufactured Ti-6Al-4V: Surface Condition vs. Internal Defects
Y. Y. Sun et al.
JOM (2020)
Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography
Mario Sokac et al.
MEASUREMENT (2020)
Ultrasonic-Induced Phase Redistribution and Acoustic Hardening for Rotary Ultrasonic Roller Burnished Ti-6Al-4V
Jian Zhao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Evaluation of the standard measurement uncertainty due to the ISO50 surface determination method for dimensional computed tomography
J. J. Lifton et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
A Proposed Scan Strategy Used on SLM Inner Structure Part
Jitai Han et al.
MATERIALS (2020)
On the effect of shielding gas flow on porosity and melt pool geometry in laser powder bed fusion additive manufacturing
Joni Reijonen et al.
ADDITIVE MANUFACTURING (2020)
Simulation study of the spatter removal process and optimization design of gas flow system in laser powder bed fusion
Xiaobing Zhang et al.
ADDITIVE MANUFACTURING (2020)
Effects of inter layer time and build height on resulting properties of 316L stainless steel processed by laser powder bed fusion
Gunther Mohr et al.
ADDITIVE MANUFACTURING (2020)
X-ray CT and image analysis methodology for local roughness characterization in cooling channels made by metal additive manufacturing
C. G. Klingaa et al.
ADDITIVE MANUFACTURING (2020)
As-fabricated surface morphologies of Ti-6Al-4V samples fabricated by different laser processing parameters in selective laser melting
Snehashis Pal et al.
ADDITIVE MANUFACTURING (2020)
Post-Processing of Complex SLM Parts by Barrel Finishing
Alberto Boschetto et al.
APPLIED SCIENCES-BASEL (2020)
Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
M. Kahlin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Meal fatigue strength assessment of cast aluminium surface layers
S. Pomberger et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications
A. Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
In-situ simultaneous surface finishing using abrasive flow machining via novel fixture
Rajendra Baraiya et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
On the size and orientation effect in additive manufactured Ti-6Al-4V
D. Barba et al.
MATERIALS & DESIGN (2020)
Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness, and micropores for manufactured Ti6Al4V parts
Mohd Faizal Sadali et al.
JOURNAL OF MATERIALS RESEARCH (2020)
Topology optimization of support structure layout in metal-based additive manufacturing accounting for thermal deformations
Jeroen Pellens et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Support optimization in additive manufacturing for geometric and thermo-mechanical constraints
Gregoire Allaire et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2020)
Towards Deterministic Computation of Internal Stresses in Additively Manufactured Materials under Fatigue Loading: Part I
Mustafa Awd et al.
MATERIALS (2020)
Element Vaporization of Ti-6Al-4V Alloy during Selective Laser Melting
Guohao Zhang et al.
METALS (2020)
Dimensional Errors Due to Overhanging Features in Laser Powder Bed Fusion Parts Made of Ti-6Al-4V
Amal Charles et al.
APPLIED SCIENCES-BASEL (2020)
Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V
Tatiana Mishurova et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Fatigue behaviors of foreign object damaged Ti-6Al-4V alloys under laser shock peening
Yu Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Recent developments in metal additive manufacturing
Amit Bandyopadhyay et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2020)
Removability of 316L stainless steel cone and block support structures fabricated by Selective Laser Melting (SLM)
Qiqiang Cao et al.
MATERIALS & DESIGN (2020)
Surface roughness effect of SLM and EBM Ti-6Al-4V on multiaxial high cycle fatigue
Bastien Vayssette et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
A numerical framework to predict the fatigue life of lattice structures built by additive manufacturing
Alexis Burr et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Numerical study of the impact of vaporisation on melt pool dynamics in Laser Powder Bed Fusion - Application to IN718 and Ti-6Al-4V
Alexis Queva et al.
ADDITIVE MANUFACTURING (2020)
Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion
Eren Pehlivan et al.
ADDITIVE MANUFACTURING (2020)
Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process
Zachary A. Young et al.
ADDITIVE MANUFACTURING (2020)
Quantitatively accounting for the effects of surface topography on the oxidation kinetics of additive manufactured Hastelloy X processed by electron beam melting
Matthew C. Kuner et al.
ADDITIVE MANUFACTURING (2020)
Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process
M. C. Sow et al.
ADDITIVE MANUFACTURING (2020)
A study on surface morphology and tension in laser powder bed fusion of Ti-6Al-4V
Mahyar Khorasani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique
Dechun Ren et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
Ali Fatemi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
A study on the production of thin-walled Ti6Al4V parts by selective laser melting
G. Miranda et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Characterisation of additively manufactured metal surfaces by means of X-ray computed tomography and generalised surface texture parameters
Filippo Zanini et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Fundamental aspects and recent developments in electropolishing
Wei Han et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Introduction of a Surface Characterization Parameter Sdrprime for Analysis of Re-entrant Features
A. Townsend et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2019)
Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
Usman Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Amal Charles et al.
APPLIED SCIENCES-BASEL (2019)
An experimental study of tensile property variability in selective laser melting
Shanshan Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
3D characterization of defects in deep-powder-bed manufactured Ti-6Al-4V and their influence on tensile properties
J. Elambasseril et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Towards a new definition of areal surface texture parameters on freeform surface: Re-entrant features and functional parameters
Luca Pagani et al.
MEASUREMENT (2019)
Discrete element simulation of powder layer thickness in laser additive manufacturing
Quanquan Han et al.
POWDER TECHNOLOGY (2019)
Design for additive manufacturing - a review of available design methods and software
Anton Wiberg et al.
RAPID PROTOTYPING JOURNAL (2019)
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Balasubramanian Nagarajan et al.
ENGINEERING (2019)
On utilizing topology optimization to design support structure to prevent residual stress induced build failure in laser powder bed metal additive manufacturing
Lin Cheng et al.
ADDITIVE MANUFACTURING (2019)
Experimental and numerical assessment of surface roughness for Ti6Al4V lattice elements in selective laser melting
Ahmad Alghamdi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial nand multiaxial non-proportional loading
Stefano Bressan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fabricating high dimensional accuracy LPBFed Ti6Al4V part by using bi-parameter method
Luo Zhang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Evaluation of Low Cycle Fatigue Performance of Selective Laser Melted Titanium Alloy Ti-6Al-4V
Peng Zhang et al.
METALS (2019)
The Effect of Position of Materials on a Build Platform on the Hardness, Roughness, and Corrosion Resistance of Ti6Al4V Produced by DMLS Technology
Anna Guzanova et al.
METALS (2019)
Abrasive flow machining of laser powder bed-fused parts: Numerical modeling and experimental validation
C. Bouland et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Accuracy analysis of a piece-to-piece reverse engineering workflow for a turbine foil based on multi-modal computed tomography and additive manufacturing
Fabian Bauer et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V
Haiying Zhang et al.
CHINESE JOURNAL OF AERONAUTICS (2019)
Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Surface Treatment of Powder-Bed Fusion Additive Manufactured Metals for Improved Fatigue Life
David B. Witkin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
The effect of hatch angle rotation on parts manufactured using selective laser melting
Joseph Henry Robinson et al.
RAPID PROTOTYPING JOURNAL (2019)
Study on the Geometric Design of Supports for Overhanging Structures Fabricated by Selective Laser Melting
Kaifei Zhang et al.
MATERIALS (2019)
Effect of Hatch Spacing on Melt Pool and As-built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches
Zhichao Dong et al.
MATERIALS (2019)
On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
Reza Esmaeilizadeh et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of Scanning Strategy During Selective Laser Melting on Surface Topography, Porosity, and Microstructure of Additively Manufactured Ti-6Al-4V
Emilie Hordum Valente et al.
APPLIED SCIENCES-BASEL (2019)
Melt pool geometry and microstructure of Ti6Al4V with B additions processed by selective laser melting additive manufacturing
Yining He et al.
MATERIALS & DESIGN (2019)
Mechanical and thermal characterisation of AlSi10Mg SLM block support structures
Martin Leary et al.
MATERIALS & DESIGN (2019)
Reducing the roughness of internal surface of an additive manufacturing produced 316 steel component by chempolishing and electropolishing
Pawan Tyagi et al.
ADDITIVE MANUFACTURING (2019)
Areal topography measurement of metal additive surfaces using focus variation microscopy
Lewis Newton et al.
ADDITIVE MANUFACTURING (2019)
A Framework for Optimizing Process Parameters in Powder Bed Fusion (PBF) Process Using Artificial Neural Network (ANN)
Mallikharjun Marrey et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Effect of Surface Roughness on Fatigue Strength of Ti-6Al-4V Alloy Manufactured by Additive Manufacturing
Masanori Nakatani et al.
FATIGUE DESIGN 2019, INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, 8TH EDITION (2019)
Understanding the wire electrical discharge machining of Ti6A14V alloy
A. Pramanik et al.
HELIYON (2019)
The effect of preprocessing on surface quality in the chemical polishing of parts from titanium alloy produced by SLM
Andrey Balyakin et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Surface roughness and radiusing of Ti6Al4V selective laser melting-manufactured parts conditioned by barrel finishing
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Optimizing the structure accuracy by changing the scanning strategy using selective laser melting
Jitai Han et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Beyond the orthogonal: on the influence of build orientation on fatigue crack growth in SLM Ti-6Al-4V
Calvin Rans et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
Fei Cao et al.
JOM (2018)
Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing
Neda Mohammadian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Development, characterization and test of an ultrasonic vibration-assisted ball burnishing tool
Ramon Jerez-Mesa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process
V. Gunenthiram et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of adding support structures for overhanging part on fatigue strength in selective laser melting
Yuka Kajima et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V
J. Dzugan et al.
MATERIALS CHARACTERIZATION (2018)
Understanding the Interdependencies Between Composition, Microstructure, and Continuum Variables and Their Influence on the Fracture Toughness of α/β-Processed Ti-6Al-4V
P. C. Collins et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness
F. Cabanettes et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Dimensional metrology with X-ray CT: A comparison with CMM measurements on internal features and compliant structures
Herminso Villarraga-Gomez et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Optimising the process parameters of selective laser melting for the fabrication of Ti6Al4V alloy
Zhonghua Li et al.
RAPID PROTOTYPING JOURNAL (2018)
Effects of Build Orientation on Surface Morphology and Bone Cell Activity of Additively Manufactured Ti6Al4V Specimens
Volker Weissmann et al.
MATERIALS (2018)
A Review on Melt-Pool Characteristics in Laser Welding of Metals
Behzad Fotovvati et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
The effect of ordered and partially ordered surface topography on bone cell responses: a review
N. Gui et al.
BIOMATERIALS SCIENCE (2018)
Research on Selective Laser Melting of Ti6Al4V: Surface Morphologies, Optimized Processing Zone, and Ductility Improvement Mechanism
Di Wang et al.
METALS (2018)
A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
Dylan Agius et al.
METALS (2018)
In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
Philip J. DePond et al.
MATERIALS & DESIGN (2018)
Angle defines attachment: Switching the biological response to titanium interfaces by modifying the inclination angle during selective laser melting
Avik Sarker et al.
MATERIALS & DESIGN (2018)
On the effect of internal channels and surface roughness on the high-cycle fatigue performance of Ti-6Al-4V processed by SLM
Johannes Guenther et al.
MATERIALS & DESIGN (2018)
Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6A1-4V including build orientation and surface roughness effects
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
Hiroshige Masuo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy
Ahmed H. Maamoun et al.
MATERIALS (2018)
Characterization of metal additive manufacturing surfaces using synchrotron X-ray CT and micromechanical modeling
C. A. Kantzos et al.
COMPUTATIONAL MECHANICS (2018)
A study of fatigue notch sensibility on titanium alloy TiAl6V4 parts manufactured by selective laser melting
L. P. Borrego et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
A study on the effect of energy input on spatter particles creation during selective laser melting process
Mohsen Taheri Andani et al.
ADDITIVE MANUFACTURING (2018)
Contact-Free Support Structures for Part Overhangs in Powder-Bed Metal Additive Manufacturing
Kenneth Cooper et al.
INVENTIONS (2018)
Laser peening: A tool for additive manufacturing post-processing
Lloyd Hackel et al.
ADDITIVE MANUFACTURING (2018)
Standardized X-ray tomography testing of additively manufactured parts: A round robin test
Anton du Plessis et al.
ADDITIVE MANUFACTURING (2018)
On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
Naor Elad Uzan et al.
ADDITIVE MANUFACTURING (2018)
Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components
Zhuoer Chen et al.
ADDITIVE MANUFACTURING (2018)
Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy
R. Rashid et al.
ADDITIVE MANUFACTURING (2018)
The effect of multi-beam strategies on selective laser melting of stainless steel 316L
Thorsten Heeling et al.
ADDITIVE MANUFACTURING (2018)
Melt pool temperature and cooling rates in laser powder bed fusion
Paul A. Hooper
ADDITIVE MANUFACTURING (2018)
Study of the spatter distribution on the powder bed during selective laser melting
Ahmad Bin Anwar et al.
ADDITIVE MANUFACTURING (2018)
Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components
C. Garb et al.
ENGINEERING FRACTURE MECHANICS (2017)
Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion
V. Urlea et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Characterization of bending vibration fatigue of SLM fabricated Ti-6A1-4V
Benjamin Ellyson et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting
K. F. Walker et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Torsional fatigue behavior of wrought and additive manufactured Ti-6A1-4V by powder bed fusion including surface finish effect
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue properties of a titanium alloy (Ti-6Al-4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
Nikolas Hrabe et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Daniel Greitemeier et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
S. Bagehorn et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
Jon Inaki Arrizubieta et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components
V. Urlea et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Improving additive manufacturing processability of hard-to-process overhanging structure by selective laser melting
Hongyu Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
M. Benedetti et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evaluation of Powder Layer Density for the Selective Laser Melting (SLM) Process
Joon-Phil Choi et al.
MATERIALS TRANSACTIONS (2017)
Discrete element simulation and experimental study of powder spreading process in additive manufacturing
S. Haeri et al.
POWDER TECHNOLOGY (2017)
Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations
S. Haeri
POWDER TECHNOLOGY (2017)
A new threshold selection method for X-ray computed tomography for dimensional metrology
Tomasz Kowaluk et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Areal surface texture data extraction from X-ray computed tomography reconstructions of metal additively manufactured parts
A. Townsend et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing
K. L. Tan et al.
WEAR (2017)
Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron Beam Melting Subject to Part Orientation
Volker Weissmann et al.
METALS (2017)
Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
Di Wang et al.
MATERIALS & DESIGN (2017)
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation
J. Ahn et al.
MATERIALS & DESIGN (2017)
Spatter formation in selective laser melting process using multi-laser technology
Mohsen Taheri Andani et al.
MATERIALS & DESIGN (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting
Yang Tian et al.
ADDITIVE MANUFACTURING (2017)
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
Austin T. Sutton et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Support Structure Development and Initial Results for Metal Powder Bed Fusion Additive Manufacturing
Dakota Morgan et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Biomedical applications of additive manufacturing: Present and future
Sunpreet Singh et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
As-built surface layer characterization and fatigue behavior of DMLS Ti6A14V
R. Konecna et al.
3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017) (2017)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting
Y. Y. Sun et al.
JOM (2016)
The effect of laser remelting on the surface chemistry of Ti6al4V components fabricated by selective laser melting
Jayasheelan Vaithilingam et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Practical support structures for selective laser melting
M. X. Gan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
Jayasheelan Vaithilingam et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Measurement of powder bed density in powder bed fusion additive manufacturing processes
G. Jacob et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2016)
Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites
Qimin Shi et al.
OPTICS AND LASER TECHNOLOGY (2016)
Detecting surface roughness on SLS parts with various measuring techniques
M. Launhardt et al.
POLYMER TESTING (2016)
Surface texture metrology for metal additive manufacturing: a review
A. Townsend et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices
Maciej Mazur et al.
RAPID PROTOTYPING JOURNAL (2016)
Fatigue of Ti6Al4V Structural Health Monitoring Systems Produced by Selective Laser Melting
Maria Strantza et al.
MATERIALS (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
Alexander Ladewig et al.
ADDITIVE MANUFACTURING (2016)
Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs et al.
ADDITIVE MANUFACTURING (2016)
Just-in-time design and additive manufacture of patient-specific medical implants
Darpan Shidid et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
SURFACE QUALITY RESEARCH FOR SELECTIVE LASER MELTING OF TI-6AL-4V ALLOY
M. Krol et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Effect of process parameters on the surface roughness of overhanging structures in laser powder bed fusion additive manufacturing
Jason C. Fox et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
On the role of melt flow into the surface structure and porosity development during selective laser melting
Chunlei Qiu et al.
ACTA MATERIALIA (2015)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Surface morphology of Ti-6Al-4V plate fabricated by vacuum selective laser melting
Y. Sato et al.
APPLIED PHYSICS B-LASERS AND OPTICS (2015)
Effect of build direction on the fracture toughness and fatigue crack growth in selective laser melted Ti-6Al-4V
P. Edwards et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Laser polishing of selective laser melted components
S. Marimuthu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Characterization and Control of Powder Properties for Additive Manufacturing
A. Strondl et al.
JOM (2015)
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
J. Kranz et al.
JOURNAL OF LASER APPLICATIONS (2015)
Surface Finishes for Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering
Guilherme Arthur Longhitano et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Characterization of typical surface effects in additive manufacturing with confocal microscopy
Tobias Grimm et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)
An experimental and theoretical investigation of surface roughness of poly-jet printed parts This paper explains how local surface orientation affects surface roughness in a poly-jet process
Krishnan Kumar et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Crack propagation and fracture toughness of Ti6A14V alloy produced by selective laser melting
V Cain et al.
ADDITIVE MANUFACTURING (2015)
Electrochemical polishing as a 316L stainless steel surface treatment method: Towards the improvement of biocompatibility
Sajjad Habibzadeh et al.
CORROSION SCIENCE (2014)
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
S. Clijsters et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
On Optimization of Surface Roughness of Selective Laser Melted Stainless Steel Parts: A Statistical Study
K. Alrbaey et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Mesoscopic simulation model of selective laser melting of stainless steel powder
Saad A. Khairallah et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
F. Calignano
MATERIALS & DESIGN (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Developing LBM process parameters for Ti-6A1-4V thin wall structures and determining the corresponding mechanical characteristics
Bhrigu Ahuja et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications
J. A. Yaguee-Fabra et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Microremoval modeling of surface roughness in barrel finishing
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
P. Edwards et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Advanced lattice support structures for metal additive manufacturing
Ahmed Hussein et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
Kai Guan et al.
MATERIALS & DESIGN (2013)
Comparison of different post processing technologies for SLM generated 3161 steel parts
Lukas Loeber et al.
RAPID PROTOTYPING JOURNAL (2013)
Analysis of Fracture Toughness and Crack Propagation of Ti6Al4V Produced by Selective Laser Melting
Brecht Van Hooreweder et al.
ADVANCED ENGINEERING MATERIALS (2012)
Accuracy of industrial computed tomography measurements: Experimental results from an international comparison
Simone Carmignato
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Wang Di et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
The helix scan strategy applied to the selective laser melting
Qian Bo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Gas flow effects on selective laser melting (SLM) manufacturing performance
B. Ferrar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks
Igor Yadroitsev et al.
RAPID PROTOTYPING JOURNAL (2012)
Experimental design approach to optimize selective laser melting of martensitic 17-4 PH powder: part I - single laser tracks and first layer
M. Averyanova et al.
RAPID PROTOTYPING JOURNAL (2012)
The physics of wind-blown sand and dust
Jasper F. Kok et al.
REPORTS ON PROGRESS IN PHYSICS (2012)
Adaptive tool-path generation of rapid prototyping for complex product models
G. Q. Jin et al.
JOURNAL OF MANUFACTURING SYSTEMS (2011)
The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts
Evren Yasa et al.
RAPID PROTOTYPING JOURNAL (2011)
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Effects of processing parameters on rapid manufacturing 90W-7Ni-3Fe parts via selective laser melting
R. D. Li et al.
POWDER METALLURGY (2010)
Surface roughness prediction using measured data and interpolation in layered manufacturing
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium
R. Rai et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Fabrication direction optimization to minimize post-machining in layered manufacturing
Daekeon Ahn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Statistical modelling and optimization of surface roughness in the selective laser sintering process
P. B. Bacchewar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Optimisation of processing parameters in laser fused H13/Cu materials using response surface method (RSM)
V. E. Beal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Advances in investment casting of Ti-6Al-4V alloy: a review
L Nastac et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2006)
Pickup (critical) velocity of particles
H Kalman et al.
POWDER TECHNOLOGY (2005)
Roughness parameters
ES Gadelmawla et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Share Paper
