Related references
Note: Only part of the references are listed.Role of constituent intermetallic phases and precipitates in initiation and propagation of intergranular corrosion of an Al-Li-Cu-Mg alloy
X. Xu et al.
CORROSION SCIENCE (2022)
Influence of foreign object impact mode on fatigue performance of 2198-T8 Al-Li alloy thin sheets for fuselage
Yajun Chen et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)
Towards understanding micro-galvanic activities in localised corrosion of AA2099 aluminium alloy
YanHan Liew et al.
ELECTROCHIMICA ACTA (2021)
How microstructure affects localized corrosion resistance of stir zone of the AA2198-T8 alloy after friction stir welding
Caruline de Souza Carvalho Machado et al.
MATERIALS CHARACTERIZATION (2021)
Review of micro-scale and atomic-scale corrosion mechanisms of second phases in aluminum alloys
Yuan-yuan Ji et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
Corrosion-induced mechanical properties degradation of Al-Cu-Li (2198-T351) aluminium alloy and the role of side-surface cracks
Christina Charalampidou et al.
CORROSION SCIENCE (2021)
Corrosion Behavior of AA2055 Aluminum-Lithium Alloys Anodized in the Presence of Sulfuric Acid Solution
Pedro Oliver Samaniego-Gamez et al.
COATINGS (2021)
Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties
Antonello Astarita et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Localized corrosion induced surface modifications of Al-Cu-Li alloy studied by ToF-SIMS 3D imaging
Meicheng Li et al.
NPJ MATERIALS DEGRADATION (2021)
Localized corrosion at nm-scale hardening precipitates in Al-Cu-Li alloys
Yakun Zhu et al.
ACTA MATERIALIA (2020)
Exfoliation and intergranular corrosion resistance of the 2198 Al-Cu-Li alloy with different thermomechanical treatments
Joao V. de Sousa Araujo et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)
Sealing of anodized AA2099-T83 Al-Cu-Li alloy with layered double hydroxides for high corrosion resistance at reduced anodic film thickness
P. Zhu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Dealloying-driven local corrosion by intermetallic constituent particles and dispersoids in aerospace aluminium alloys
A. Kosari et al.
CORROSION SCIENCE (2020)
Corrosion behaviour of AA2198-T8 and AA2024-T3 alloy in 3.5% aqueous solution
Dimitris Georgoulis et al.
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 (2020)
Insights on the Al-Cu-Fe-Mn intermetallic particles induced pitting corrosion of Al-Cu-Li alloy
Meicheng Li et al.
CORROSION SCIENCE (2020)
Microstructural Characteristics of the Al Alloys: The Dissimilarities Among the 2XXX Alloys Series used in Aircraft Structures
Joao Victor de Sousa Araujo et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2020)
Correlating the Modes of Corrosion with Microstructure in the Friction Stir Welded AA2198-T8 Alloy in Aqueous Hydrogen Peroxide-Chloride Medium
Caruline de Souza Carvalho Machado et al.
CORROSION (2019)
Studies on the sealing processes of corrosion resistant coatings formed on 2024 aluminium alloy with tartaric-sulfuric anodizing
Ruoxi Wang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Comparison of the corrosion resistance of an Al-Cu alloy and an Al-Cu-Li alloy
Mariana X. Milagre et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2019)
Studies on Pitting Corrosion of Al-Cu-Li Alloys Part I: Effect of Li Addition by Microstructural, Electrochemical, In-situ, and Pit Depth Analysis
Xiaowei Lei et al.
MATERIALS (2019)
Thermomechanical treatment and corrosion resistance correlation in the AA2198 Al-Cu-Li alloy
Joao Victor de Sousa Araujo et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2019)
Corrosion behavior of anodized Al-Cu-Li alloy: The role of intermetallic particle-introduced film defects
Y. Ma et al.
CORROSION SCIENCE (2019)
Studies on Pitting Corrosion of Al-Cu-Li Alloys Part II: Breakdown Potential and Pit Initiation
Elmira Ghanbari et al.
MATERIALS (2019)
Studies on Pitting Corrosion of Al-Cu-Li Alloys Part III: Passivation Kinetics of AA2098-T851 Based on the Point Defect Model
Elmira Ghanbari et al.
MATERIALS (2019)
Micro- and nano-scale intermetallic phases in AA2070-T8 and their corrosion behavior
Yakun Zhu et al.
ELECTROCHIMICA ACTA (2019)
Characterization and corrosion behavior of anodized Aluminum alloys for military industries applications in artificial seawater
Soha A. Abdel-Gawad et al.
SURFACES AND INTERFACES (2019)
Influence of Hard Anodizing on the Mechanical and Corrosion Properties of Different Aluminum Alloys
Hagar Ashour Elkilany et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2019)
Corrosion and Anodizing Behavior of T1 (Al2CuLi) Precipitates in Al-Cu-Li Alloy
Y. Ma et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
On the severe localized corrosion susceptibility of the AA2198-T851 alloy
Joao Victor de Sousa Araujo et al.
CORROSION SCIENCE (2018)
Hard anodizing of AA2011-T3 Al-Cu-Pb-Bi free-cutting alloy: improvement of the process parameters
Massimiliano Bononi et al.
CORROSION SCIENCE (2018)
On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour
Uyime Donatus et al.
CORROSION SCIENCE (2018)
Effect of Iron-Containing Intermetallic Particles on Film Structure and Corrosion Resistance of Anodized AA2099 Alloy
H. Wu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Qualitative use of potentiodynamic polarization and anodic hydrogen evolution in the assessment of corrosion susceptibility in AA2198-T851 Al-Cu-Li alloy
Uyime Donatus et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2018)
Morphology perspective on chromic acid anodizing replacement by thin film sulfuric acid anodizing
Zhongfen Ding et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Intermetallic Phases in Aluminum Alloys and Their Roles in Localized Corrosion
Yakun Zhu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Corrosion and anodizing behaviour of friction stir weldment of AA2198-T851 Al-Cu-Li alloy
Uyime Donatus et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Dissolution Behavior of Intermetallic Particles in AA2297-T87 during Anodizing in Adipic-Sulfuric Acid
Jianhua Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Hard anodizing of AA2099-T8 aluminum lithium copper alloy: Influence of electric cycle, electrolytic bath composition and temperature
Massimiliano Bononi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Microstructural evolution and mechanical behavior of friction spot welded 2198-T8 Al-Li alloy during aging treatment
Chong Gao et al.
MATERIALS & DESIGN (2017)
Microstructural evolution and interfacial crack corrosion behavior of double-sided laser beam welded 2060/2099 Al-Li alloys T-joints
Bing Han et al.
MATERIALS & DESIGN (2017)
Microstructural origin of localized corrosion in anodized AA2099-T8 aluminium-lithium alloy
Yanlong Ma et al.
SURFACE AND INTERFACE ANALYSIS (2016)
The propagation of localized corrosion in Al-Cu-Li alloy
X. Zhang et al.
SURFACE AND INTERFACE ANALYSIS (2016)
A closer look at constituent induced localised corrosion in Al-Cu-Mg alloys
N. Birbilis et al.
CORROSION SCIENCE (2016)
Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation
Y. Ma et al.
CORROSION SCIENCE (2016)
Anodizing of multiphase aluminium alloys in sulfuric acid: in-situ electrochemical behaviour and oxide properties
Delphine Veys-Renaux et al.
ELECTROCHIMICA ACTA (2016)
Characterization of Localized Corrosion in an Al-Cu-Li Alloy
Chen Luo et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Application of EIS to In Situ Characterization of Hydrothermal Sealing of Anodized Aluminum Alloys: Comparison between Hexavalent Chromium-Based Sealing, Hot Water Sealing and Cerium-Based Sealing
A. Carangelo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Influence of thermomechanical treatments on localized corrosion susceptibility and propagation mechanism of AA2099 Al-Li alloy
Yan-long Ma et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review
A. C. Umamaheshwer Rao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Anodisation of Aluminium Alloys by Micro-Capillary Technique as a Tool for Reliable, Cost-Efficient, and Quick Process Parameter Determination
Daniela Nickel et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
Mechanical properties degradation of (Al-Cu-Li) 2198 alloy due to corrosion exposure
Nikolaos D. Alexopoulos et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Effect of artificial aging on the mechanical performance of (Al-Cu) 2024 and (Al-Cu-Li) 2198 aluminum alloys
Nikolaos D. Alexopoulos et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Electrochemical behaviour of AA2198 and AA2139 in neutral solutions
A. Balbo et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Localized corrosion in AA2099-T83 aluminum-lithium alloy: The role of intermetallic particles
Y. Ma et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
Woo Lee et al.
CHEMICAL REVIEWS (2014)
Effect of varying conditions of exposure to an aggressive medium on the corrosion behavior of the 2050 Al-Cu-Li alloy
Mathilde Guerin et al.
CORROSION SCIENCE (2014)
SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al-Li alloys used in aircraft fabrication
J. A. Moreto et al.
CORROSION SCIENCE (2014)
Corrosion inhibition by anionic surfactants of AA2198 Li-containing aluminium alloy in chloride solutions
Andrea Balbo et al.
CORROSION SCIENCE (2013)
Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy
Celine Larignon et al.
ELECTROCHIMICA ACTA (2013)
Fatigue behavior of the aeronautical Al-Li (2198) aluminum alloy under constant amplitude loading
Nikolaos D. Alexopoulos et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Microstructural characterisation of oxide layer developed by sulphuric anodisation on 2017A alloys
Chahinez Fares et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2013)
Grain-stored energy and the propagation of intergranular corrosion in AA2xxx aluminium alloys
X. Zhou et al.
SURFACE AND INTERFACE ANALYSIS (2013)
Corrosion of an Advanced Al-Cu-Li Alloy for Aerospace Applications
D. M. Carrick et al.
LIGHT METALS TECHNOLOGY 2013 (2013)
Discontinuities in the porous anodic film formed on AA2099-T8 aluminium alloy
Y. Ma et al.
CORROSION SCIENCE (2011)
Corrosion of AA2024-T3 Part II Co-operative corrosion
A. E. Hughes et al.
CORROSION SCIENCE (2011)
Corrosion of AA2024-T3 Part III: Propagation
A. M. Glenn et al.
CORROSION SCIENCE (2011)
Corrosion of AA2024-T3 Part I. Localised corrosion of isolated IM particles
A. Boag et al.
CORROSION SCIENCE (2011)
Anodic Film Formation on AA 2099-T8 Aluminum Alloy in Tartaric-Sulfuric Acid
Y. Ma et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Distribution of intermetallics in an AA 2099-T8 aluminium alloy extrusion
Y. Ma et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
The behaviour of second phase particles during anodizing of aluminium alloys
M. Saenz de Miera et al.
CORROSION SCIENCE (2010)
Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys
M. Saenz de Miera et al.
SURFACE AND INTERFACE ANALYSIS (2010)
Enhanced performance of the AA2050-T8 aluminium alloy following excimer laser surface melting and anodising processes
F. Viejo et al.
THIN SOLID FILMS (2010)
Influence of molybdate species on the tartaric acid/sulphuric acid anodic films grown on AA2024 T3 aerospace alloy
M. Garcia-Rubio et al.
CORROSION SCIENCE (2009)
2198 Al-Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior
P. Cavaliere et al.
MATERIALS & DESIGN (2009)
Modelling the anodizing behaviour of aluminium alloys in sulphuric acid through alloy analogues
M. Saenz de Miera et al.
CORROSION SCIENCE (2008)
Investigation of the corrosion behaviour of AA 2024-T3 in low concentrated chloride media
F. M. Queiroz et al.
CORROSION SCIENCE (2008)
Use of LCA to evaluate the environmental benefits of substituting chromic acid anodizing (CAA)
Erwan Harscoet et al.
JOURNAL OF CLEANER PRODUCTION (2008)
Macroscopic and local filming behavior of AA2024 T3 aluminum alloy during anodizing in sulfuric acid electrolyte
M. Curioni et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Combination of AFM, SKPFM, and SIMS to study the corrosion behavior of S-phase particles in AA2024-T351
Loic Lacroix et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Cyclic oxidation processes during anodizing of Al-Cu alloys
L. Iglesias-Rubianes et al.
ELECTROCHIMICA ACTA (2007)
Anodic behaviour of a model second phase: Al-20at.%Mg-20at.%Cu
Y. Liu et al.
CORROSION SCIENCE (2006)
Electrochemical characteristics of intermetallic phases in aluminum alloys - An experimental survey and discussion
N Birbilis et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Influence of substrate microstructure on the growth of anodic oxide layers
LE Fratila-Apachitei et al.
ELECTROCHIMICA ACTA (2004)
Behavior of second-phase particles in Al5052 alloy during anodizing in a sulfuric acid solution - CSLM observation
SM Moon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Application of CSLM to the surface morphological study of al 5052 alloy anodized in sulfuric acid solution
SM Moon et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Molybdate/sulfuric acid anodising of 2024-aluminium alloy: influence of inhibitor concentration on film growth and on corrosion resistance
V Moutarlier et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Electrochemical study of the corrosion behavior of Ce sealing of anodized 2024 aluminum alloy
XW Yu et al.
THIN SOLID FILMS (2003)
Dealloying and corrosion of Al alloy 2024-T3
MB Vukmirovic et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Share Paper
