4.7 Article

Enhance mechanical damping behavior of RHA-cement mortar with bionic inorganic-organic laminated structures

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Investigation of the hydration properties of cement with EDTA by alternative current impedance spectroscopy

Lin Chi et al.

Summary: This study investigates the effects of EDTA on the hydration of hardening cement using ACIS, finding that EDTA can retard early-age hydration but facilitate later-age reaction, resulting in higher compressive strength. Microstructural characterization reveals the mechanism of EDTA, while the resistivity evolution detected by ACIS reflects the effects of EDTA on cement hydration at different ages.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Damping characteristics of PVA fiber-reinforced cementitious composite containing high-volume fly ash under frequency -temperature coupling effects

Wu-Jian Long et al.

Summary: By developing the PVA-HVFA cementitious composite, the study optimized the damping performance of concrete structures while improving strength and energy dissipation capacity. The results revealed the coupling effects of frequency and temperature on damping, providing theoretical support for enhancing the damping effect of structures.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Multi-structural evolution of conductive reactive powder concrete manufactured by enhanced ohmic heating curing

Weichen Tian et al.

Summary: This study proposed an enhanced ohmic heating curing method for conductive hybrid carbon fibers reinforced RPC, which significantly improved its strength and curing efficiency compared to traditional methods. The enhanced ohmic heating process resulted in enhanced hydration effects, longer chain lengths, and improved pore structures in the cured samples, making it a promising alternative for rapidly producing RPC structures with enhanced properties.

CEMENT & CONCRETE COMPOSITES (2021)

Article Engineering, Environmental

Physical and mechanical properties and micro characteristics of fly ash-based geopolymer paste incorporated with waste Granulated Blast Furnace Slag (GBFS) and functionalized Multi-Walled Carbon Nanotubes (MWCNTs)

Faping Li et al.

Summary: Geopolymers, as eco-friendly alternatives to traditional cement binder, are enhanced by the incorporation of functionalized MWCNTs and partial substitution of fly ash with GBFS. The optimized geopolymer paste containing 0.1 wt.% functionalized MWCNTs and 30 % GBFS substitution demonstrates superior mechanical properties compared to other formulations.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Green & Sustainable Science & Technology

Performance and economic analyses of low-energy ohmic heating cured sustainable reactive powder concrete with dolomite powder as fine aggregates

Weichen Tian et al.

Summary: This study introduced dolomite powder to replace silica sand in the fabrication of sustainable reactive powder concrete (SRPC) and utilized low-energy ohmic heating (LEOH) curing method, which resulted in enhanced compressive strength and improved microstructure. Economic analysis further demonstrated the benefits of reducing material and energy costs.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Effect of rice husk ash surface modification by silane coupling agents on damping capacity of cement-based pastes

Xinyu Cong et al.

Summary: This study optimized the process of rice husk ash and employed silane coupling agents to improve the damping capacity of cement-based composites. The modifications on the surface and pore structure of the ash resulted in enhanced damping performance of the composites, especially with the use of silane A151.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Construction & Building Technology

Action mechanism of rice husk ash and the effect on main performances of cement-based materials: A review

Jialei Wang et al.

Summary: Rice husk ash (RHA) is a byproduct of agricultural waste combustion, containing high pozzolanic activity and internal curing characteristics that can significantly improve the properties of cement-based materials. The effects of RHA on various performances of cementitious materials have been investigated, with a focus on its hydration mechanism and optimal content range. Through further research, it is believed that RHA can contribute to the green and sustainable application of cement-based materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Mechanical properties and damping capacity of polypropylene fiber reinforced concrete modified by rubber powder

Jinxu Mo et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Graphene Size and Morphology: Peculiar Effects on Damping Properties of Polymer Nanocomposites

S. Sarikaya et al.

EXPERIMENTAL MECHANICS (2020)

Article Materials Science, Composites

The effect of carbon nanotubes on the mechanical and damping properties of macro-defect-free cements

Zhang Wenhua et al.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2020)

Article Construction & Building Technology

Laboratory investigation on the behavior of ballast stabilized with bitumen-cement mortar

Morteza Esmaeili et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Experimental research on controlling the floating of rubber particles in mortar based on the layering degree index

Jian Liang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Engineering, Multidisciplinary

Damping additives used in cement-matrix composites: A review

Lin Chi et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Construction & Building Technology

Evaluation of mechanic damping properties of montmorillonite/organo-modified montmorillonite-reinforced cement paste

Ping Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Hydration of Portland cements in solutions containing high concentration of borate ions: Effects of LiOH

Bo Li et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

A novel bio-inspired bone-mimic self-healing cement paste based on hydroxyapatite formation

Qiu Li et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Effects of rice husk ash prepared from charcoal-powered incinerator on the strength and durability properties of concrete

Festus A. Olutoge et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Design of SiO2/PMHS hybrid nanocomposite for surface treatment of cement-based materials

Ran Li et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

Enhanced dynamic mechanical properties of cement paste modified with graphene oxide nanosheets and its reinforcing mechanism

Wu-Jian Long et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

Damping characteristics of cement asphalt emulsion mortars

Zhangshen Leiben et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Investigation on the dynamic shear modulus and damping ratio of steel slag sand mixtures

Wei Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Polymer Science

Critical Evaluation of Thermal, Optical and Morphological Properties of V, S and Dy Doped-ZnO/PVDF/Functionalized-PMMA Blended Nanocomposites

Neetika Singh et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2018)

Article Materials Science, Composites

Acoustical, damping and thermal properties of polyurethane/poly(methyl methacrylate)-based semi-interpenetrating polymer network foams

Gholamreza Moradi et al.

PLASTICS RUBBER AND COMPOSITES (2018)

Article Materials Science, Multidisciplinary

Improvement of the Acoustic Attenuation of Plaster Composites by the Addition of Short-Fibre Reinforcement

P. Kulhavy et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Construction & Building Technology

Effect of Mix Parameters on the Dynamic Mechanical Properties of Cement Asphalt Mortar

Lei Fang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Article Materials Science, Paper & Wood

Physical and Morphological Properties of Combined Treated Wood Polymer Composites by Maleic Anhydride and Methyl Methacrylate

Maryam Ghorbani et al.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Self-damping cementitious composites with multi-layer graphene

Yanfeng Ruan et al.

MATERIALS RESEARCH EXPRESS (2017)

Article Construction & Building Technology

Effects of CO2 surface treatment on strength and permeability of one-day-aged cement mortar

Xiaoying Pan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Influence of rice husk ash on strength and permeability of ultra-high performance concrete

Huanghuang Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Potential of rice husk ash for mitigating the alkali-silica reaction in mortar bars incorporating reactive aggregates

Safeer Abbas et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Mechanics

Mechanical and damping properties of CNT-reinforced cementitious composites

K. M. Liew et al.

COMPOSITE STRUCTURES (2017)

Article Engineering, Multidisciplinary

Sound absorption enhancement using solid-solid interfaces in a nonporous cement-based structural material

Po-Hsiu Chen et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Materials Science, Biomaterials

Anisotropic mechanical behaviors and their structural dependences of crossed-lamellar structure in a bivalve shell

D. Jiao et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Construction & Building Technology

Mechanical properties of high strength concrete with scrap tire rubber

Ayman Moustafa et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Chemistry, Physical

Functionally modified monodisperse core-shell silica nanoparticles: Silane coupling agent as capping and size tuning agent

Jinbin Lin et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

Article Polymer Science

Dynamic mechanical analysis of recycled polystyrene composites reinforced with wood flour

Matheus Poletto et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Engineering, Chemical

SYNTHESIS OF NANOZEOLITE SODALITE FROM RICE HUSK ASH WITHOUT ORGANIC ADDITIVES

Zahra Ghasemi et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2011)

Article Construction & Building Technology

Hydration and microstructure of ultra high performance concrete incorporating rice husk ash

Nguyen Van Tuan et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Green & Sustainable Science & Technology

Biomass and biogas energy in Thailand: Potential, opportunity and barriers

S Prasertsan et al.

RENEWABLE ENERGY (2006)

Article Chemistry, Physical

The adsorption of palmytic acid on rice husk ash chemically modified with Al(III) ion using the sol-gel technique

F Adam et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2004)

Article Construction & Building Technology

Dynamic properties impact toughness and abrasiveness of polymer-modified pastes by using nondestructive tests

WG Wong et al.

CEMENT AND CONCRETE RESEARCH (2003)