4.7 Review

Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance

Hafsa Jamshaid et al.

Summary: This paper presents experimental research on the mechanical characteristics of concrete reinforced with natural cellulosic fibers. The study found that the tensile and compressive strength of concrete increased with the addition of natural fibers, up to a certain proportion. However, a further increase in fiber loading resulted in a deterioration of the mechanical properties. Using jute and sisal fibers, a significant improvement in strength was observed by adding 2% fibers to the concrete mix. Bending strength increased up to a certain fiber loading, but decreased beyond that due to cracks at the fiber-concrete interface. The impact performance gradually improved with the addition of natural fibers up to 2%. The water absorption capacity of the reinforced concrete decreased, but increased with the loading percent of fibers. The study concludes that natural fiber reinforced concrete can be a sustainable construction material for future use in pavements and flooring slabs.

MATERIALS (2022)

Article Materials Science, Textiles

Strength and Durability Characteristics of Coconut Fibre Reinforced Earth Cement Blocks

Kirupairaja Thanushan et al.

Summary: The study demonstrates that the introduction of coconut fiber significantly improves the residual strength, ductility, and energy absorption capacity of earth cement blocks, while also reducing the effects of alkaline and acid attacks, as well as resistance to freeze-thaw and wet-dry cycles.

JOURNAL OF NATURAL FIBERS (2021)

Article Construction & Building Technology

Polypropylene fiber reinforced concrete and its application in creating architectural forms of public spaces

Julia Blazy et al.

Summary: Polypropylene fibers are a dispersed reinforcement material used in concrete, improving its physical and mechanical properties. While the influence of polypropylene fibers on concrete is generally positive, there are also certain restrictions to consider when designing concrete mixtures.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Review Construction & Building Technology

Treatment of Natural Fiber for Application in Concrete Pavement

Anteneh Geremew et al.

Summary: Natural fibers offer advantages in terms of availability, sustainability, biodegradability, and cost, but they also have limitations compared to synthetic fibers. Researchers are utilizing surface treatment techniques to enhance the properties of natural fibers and overcome these limitations.

ADVANCES IN CIVIL ENGINEERING (2021)

Article Polymer Science

Mechanical Properties of Macro Polypropylene Fibre-Reinforced Concrete

Rajab Abousnina et al.

Summary: This study investigates the engineering benefits of using extruded macro polyfibres in concrete, finding that the addition of fibres significantly enhances the mechanical and microstructural properties, especially compressive, splitting tensile, and bonding strength. Fibres also increase concrete toughness, decrease macroporosity, and improve compressive strength.

POLYMERS (2021)

Article Chemistry, Multidisciplinary

Effect of Fiber Reinforcement on the Compression and Flexural Strength of Fiber-Reinforced Geopolymers

Michal Lach et al.

Summary: This study investigated the impact of different types of reinforcing fibers on the strength properties of geopolymers, and found that the use of carbon fiber reinforcement resulted in the highest mechanical properties. The strength values of geopolymers reinforced with basalt mats depended on the number of reinforcement layers and the concentration of the alkaline solution.

APPLIED SCIENCES-BASEL (2021)

Article Biotechnology & Applied Microbiology

Interactions of microorganisms and synthetic polymers in cultural heritage conservation

Francesca Cappitelli et al.

Summary: Synthetic polymers have been used in cultural heritage conservation since the 1960s, but their susceptibility to biological deterioration has raised concerns. Future use of synthetic polymers will require a more comprehensive conservation assessment.

INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2021)

Article Chemistry, Physical

Flexural Behavior of Polyurethane Concrete Reinforced by Carbon Fiber Grid

Hongjian Ding et al.

Summary: In this study, the design of polyurethane concrete was optimized to address the shortcomings of traditional repair materials for anchorage concrete of expansion joints. A carbon fiber grid-polyurethane concrete system was developed to enhance the flexural bearing capacity of the concrete. Through experiments, it was found that the best width of the carbon fiber grid was 80 mm and the optimal number of reinforcement layers was one, showing the potential for widespread application in improving the performance of concrete repair materials in the future.

MATERIALS (2021)

Article Chemistry, Physical

A Study on the Mechanical Characteristics of Glass and Nylon Fiber Reinforced Peach Shell Lightweight Concrete

Jawad Ahmad et al.

Summary: The study showed that adding glass and nylon fibers to peach shell lightweight concrete can decrease density and increase compressive, split tensile, and flexural strength. The use of 6% glass fibers resulted in the highest strength. Mechanical tests indicated that fibers can enhance post-failure toughness and modulus of elasticity of peach shell concrete.

MATERIALS (2021)

Article Multidisciplinary Sciences

A step towards sustainable glass fiber reinforced concrete utilizing silica fume and waste coconut shell aggregate

Osama Zaid et al.

Summary: This research explores the impact of adding glass fibers and coconut shells into sustainable concrete on its mechanical and durability aspects.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Multidisciplinary

Mechanical and durability characteristics of sustainable coconut fibers reinforced concrete with incorporation of marble powder

Jawad Ahmad et al.

Summary: The study aimed to evaluate the characteristics of coconut fibers reinforced concrete with the incorporation of marble slurry, which showed improvements in mechanical performance and durability of concrete, but decreased the workability of fresh concrete.

MATERIALS RESEARCH EXPRESS (2021)

Article Construction & Building Technology

Axial compressive behavior of confined steel fiber reinforced high strength concrete

Muhammad Usman et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Biochemistry & Molecular Biology

Biofunctionalization of Natural Fiber-Reinforced Biocomposites for Biomedical Applications

Tania D. Tavares et al.

BIOMOLECULES (2020)

Article Construction & Building Technology

Bond properties between GFRP bars and hybrid fiber-reinforced concrete containing three types of artificial fibers

Hua Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Construction & Building Technology

A review of mechanical properties of fibre reinforced concrete at elevated temperatures

Heyang Wu et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Chemistry, Physical

Mechanical Properties of Natural Fiber Reinforced Foamed Concrete

Joaquin F. Castillo-Lara et al.

MATERIALS (2020)

Article Materials Science, Multidisciplinary

Synthetic fibres or fibre cocktail in terms of shear capacity of concrete after elevated temperatures

Naser S. Alimrani et al.

MECHANICS OF MATERIALS (2020)

Article Construction & Building Technology

Strength behavior of reinforced concrete beam using re-cycle of PET wastes as synthetic fibers

Hamsa M. Adnan et al.

CASE STUDIES IN CONSTRUCTION MATERIALS (2020)

Article Construction & Building Technology

Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber

Dehong Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Materials Science, Multidisciplinary

Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review

Yashas Gowda Thyavihalli Girijappa et al.

FRONTIERS IN MATERIALS (2019)

Review Chemistry, Physical

Amazing Types, Properties, and Applications of Fibres in Construction Materials

Abbas Mohajerani et al.

MATERIALS (2019)

Article Chemistry, Physical

Rendering Mortars Reinforced with Natural Sheep's Wool Fibers

Cinthia Maia Pederneiras et al.

MATERIALS (2019)

Review Materials Science, Textiles

Hydrophobic treatment of natural fibers and their compositesA review

Azam Ali et al.

JOURNAL OF INDUSTRIAL TEXTILES (2018)

Article Materials Science, Textiles

Interfacial performance and durability of textile reinforced concrete

Hafsa Jamshaid et al.

JOURNAL OF THE TEXTILE INSTITUTE (2018)

Article Construction & Building Technology

Effects of hemp fibers on characteristics of cement based mortar

Bekir Comak et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

The mechanical and durability properties of concrete containing hybrid synthetic fibers

Iman Sadrinejad et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Design and properties of a new sustainable construction material based on date palm fibers and lime

R. Belakroum et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Engineering, Civil

Service performance of steel fiber reinforced concrete (SFRC) slabs

Joshua A. McMahon et al.

ENGINEERING STRUCTURES (2018)

Article Engineering, Geological

Practical approach to predict the shear strength of fibre-reinforced clay

M. Mirzababaei et al.

GEOSYNTHETICS INTERNATIONAL (2018)

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Construction & Building Technology

Mechanical Properties of Steel Fiber-Reinforced Concrete by Vibratory Mixing Technology

Yuanxun Zheng et al.

ADVANCES IN CIVIL ENGINEERING (2018)

Article Construction & Building Technology

Influence of jute fiber on concrete properties

Mohammad S. Islam et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Engineering, Multidisciplinary

Polymer matrix-natural fiber composites: An overview

T. G. Yashas Gowda et al.

COGENT ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Influence of Steel and Macro-Synthetic Fibers on Concrete Properties

Veronica Guerini et al.

FIBERS (2018)

Review Environmental Sciences

Synthetic fibers as microplastics in the marine environment: A review from textile perspective with a focus on domestic washings

Flavia Salvador Cesa et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2017)

Review Construction & Building Technology

Practical recycling applications of crushed waste glass in construction materials: A review

Abbas Mohajerani et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Proceedings Paper Green & Sustainable Science & Technology

Seismic behavior of fiber reinforced steel-concrete composite systems

Faezeh Faghih et al.

3RD INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS - SUSTAINABLE STRUCTURES FOR FUTURE GENERATIONS (2017)

Article Construction & Building Technology

Performance of coconut coir reinforced hydraulic cement mortar for surface plastering application

Navaratnarajah Sathiparan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes

T. Simoes et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials

Ashwin Narendra Rant et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Review Materials Science, Textiles

A green material from rock: basalt fiber - a review

Hafsa Jamshaid et al.

JOURNAL OF THE TEXTILE INSTITUTE (2016)

Review Engineering, Manufacturing

A review of recent developments in natural fibre composites and their mechanical performance

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Construction & Building Technology

The addition of synthetic fibres to concrete to improve impact/ballistic toughness

Alan Richardson et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Effects of short coconut fiber on the mechanical properties, plastic cracking behavior, and impact resistance of cementitious composites

Chao-Lung Hwang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Review Construction & Building Technology

Plant aggregates and fibers in earth construction materials: A review

A. Laborel-Preneron et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Geological

Strength Behavior of Clayey Soil Reinforced with Human Hair as a Natural Fibre

Wajid Ali Butt et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2016)

Article Engineering, Civil

Mechanical performance of date palm fibre-reinforced gypsums

Wail N. Al-Rifaie et al.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2016)

Proceedings Paper Energy & Fuels

Contribution to the Study of Thermal Properties of Clay Bricks Reinforced by Date Palm Fiber

A. Mekhermeche et al.

TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES) (2016)

Proceedings Paper Construction & Building Technology

Surface modification of natural fibers: a review

Juliana Cruz et al.

TENSINET - COST TU1303 INTERNATIONAL SYMPOSIUM 2016 - NOVEL STRUCTURAL SKINS - IMPROVING SUSTAINABILITY AND EFFICIENCY THROUGH NEW STRUCTURAL TEXTILE MATERIALS AND DESIGNS (2016)

Proceedings Paper Engineering, Industrial

Application of Life Cycle Engineering approach to assess the pertinence of using natural fibers in composites - the rocker case study

Hugo Carvalho et al.

23RD CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2016)

Review Chemistry, Applied

Review on hygroscopic aging of cellulose fibres and their biocomposites

Thabang H. Mokhothu et al.

CARBOHYDRATE POLYMERS (2015)

Review Engineering, Manufacturing

A review of the recent developments in biocomposites based on natural fibres and their application perspectives

T. Gurunathan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Engineering, Multidisciplinary

A review on basalt fibre and its composites

V. Fiore et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Engineering, Civil

Monotonic behavior of large-scale SFRC beams without stirrups

Dipti Ranjan Sahoo et al.

ENGINEERING STRUCTURES (2015)

Review Polymer Science

A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers

Sunil Kumar Ramamoorthy et al.

POLYMER REVIEWS (2015)

Article Chemistry, Physical

Methanol to Olefins (MTO): From Fundamentals to Commercialization

Peng Tian et al.

ACS CATALYSIS (2015)

Review Polymer Science

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

Layth Mohammed et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

Review Engineering, Manufacturing

Green composites: A review of material attributes and complementary applications

Michael P. M. Dicker et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Engineering, Multidisciplinary

Physical and mechanical properties of randomly oriented coir fiber-cementitious composites

Ozge Andic-Cakir et al.

COMPOSITES PART B-ENGINEERING (2014)

Article Construction & Building Technology

Fibre distribution in macro-plastic fibre reinforced concrete slab-panels

Pablo Pujadas et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete

Kim Hung Mo et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Materials Science, Multidisciplinary

Microstructure and mechanical performance of modified mortar using hemp fibres and carbon nanotubes

Rabah Hamzaoui et al.

MATERIALS & DESIGN (2014)

Article Materials Science, Multidisciplinary

Application of high performance polypropylene fibers in concrete lining of water tunnels

Kiachehr Behfarnia et al.

MATERIALS & DESIGN (2014)

Article Mechanics

Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties

A. Komuraiah et al.

MECHANICS OF COMPOSITE MATERIALS (2014)

Proceedings Paper Engineering, Multidisciplinary

Mechanical Properties of High-Performance Concrete Reinforced with Basalt Fibers

Tehmina Ayub et al.

FOURTH INTERNATIONAL SYMPOSIUM ON INFRASTRUCTURE ENGINEERING IN DEVELOPING COUNTRIES, (IEDC 2013) (2014)

Article Construction & Building Technology

Evaluation of pavement straw composite fiber on SMA pavement performances

Xue Qiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Review Materials Science, Composites

Characterization of natural fiber and composites - A review

T. P. Sathishkumar et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)

Article Construction & Building Technology

Mechanical properties of steel fibre concrete

Padmanabha Rao Tadepalli et al.

MAGAZINE OF CONCRETE RESEARCH (2013)

Review Materials Science, Multidisciplinary

A review on the degradability of polymeric composites based on natural fibres

Z. N. Azwa et al.

MATERIALS & DESIGN (2013)

Article Construction & Building Technology

An experimental study on the residual mechanical properties of fiber reinforced concrete with high temperature and load

Young-sun Kim et al.

MATERIALS AND STRUCTURES (2013)

Article Engineering, Multidisciplinary

Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview

M. M. Kabir et al.

COMPOSITES PART B-ENGINEERING (2012)

Article Engineering, Multidisciplinary

Tensile and fracture behaviour of PP/wood flour composites

Ezequiel Perez et al.

COMPOSITES PART B-ENGINEERING (2012)

Article Construction & Building Technology

Compressive stress-strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures

Wenzhong Zheng et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Review Construction & Building Technology

A simple review of soil reinforcement by using natural and synthetic fibers

Sayyed Mahdi Hejazi et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

Studies on fiber-reinforced concrete using industrial hemp fibers

Elie Awwad et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Engineering, Chemical

Surface Modification of Banana Fibers by DBD Plasma Treatment

Fernando Ribeiro Oliveira et al.

PLASMA CHEMISTRY AND PLASMA PROCESSING (2012)

Review Polymer Science

Natural Fiber Reinforced Composites

Michael A. Fuqua et al.

POLYMER REVIEWS (2012)

Article Engineering, Multidisciplinary

Sound absorption performance of natural fibers and their composites

Yang WeiDong et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2012)

Article Materials Science, Textiles

Review of Natural Fibers. Part I-Vegetable Fibers

Anna Kicinska-Jakubowska et al.

JOURNAL OF NATURAL FIBERS (2012)

Article Engineering, Multidisciplinary

An experimental study on the tensile strength of steel fiber reinforced concrete

R. S. Olivito et al.

COMPOSITES PART B-ENGINEERING (2010)

Article Construction & Building Technology

Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking

Fernando Pelisser et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Materials Science, Composites

The Mechanical Properties of γ-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester Composites

Kutlay Sever et al.

JOURNAL OF COMPOSITE MATERIALS (2010)

Article Engineering, Multidisciplinary

Characterization of treated date palm tree fiber as composite reinforcement

Ahmad Alawar et al.

COMPOSITES PART B-ENGINEERING (2009)

Article Materials Science, Composites

Effect of Plasma Treatment on Structure, Wettability of Jute Fiber and Flexural Strength of its Composite

E. Sinha et al.

JOURNAL OF COMPOSITE MATERIALS (2009)

Article Nanoscience & Nanotechnology

Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites

Yoldas Seki

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Article Nanoscience & Nanotechnology

Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading

Weimin Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Review Polymer Science

Biodegradable composites based on lignocellulosic fibers-An overview

Kestur G. Satyanarayana et al.

PROGRESS IN POLYMER SCIENCE (2009)

Article Materials Science, Textiles

Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison

Tamas Deak et al.

TEXTILE RESEARCH JOURNAL (2009)

Review Chemistry, Applied

Biofibres and biocomposites

Maya Jacob John et al.

CARBOHYDRATE POLYMERS (2008)

Article Construction & Building Technology

Simplified method for concrete pavement design with discrete structural fibers

Salah A. Altoubat et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Review Biotechnology & Applied Microbiology

Microorganisms attack synthetic polymers in items representing our cultural heritage

Francesca Cappitelli et al.

APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2008)

Article Materials Science, Composites

Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation

Sanjeev Singh et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Review Engineering, Environmental

Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review

Xue Li et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)

Article Mechanics

Fracture behavior of concrete members reinforced with structural synthetic fibers

Byung Hwan Oh et al.

ENGINEERING FRACTURE MECHANICS (2007)

Article Engineering, Manufacturing

Optimising industrial hemp fibre for composites

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Article Engineering, Manufacturing

Pulped Phormium tenax leaf fibres as reinforcement for epoxy composites

Marie J. Le Guen et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

Article Construction & Building Technology

How do polypropylene fibers improve the spalling behavior of in-situ concrete?

M Zeiml et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Strength properties of nylon- and polypropylene-fiber-reinforced concretes

PS Song et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Polymer Science

Composition, structure and thermal degradation of hemp cellulose after chemical treatments

S Ouajai et al.

POLYMER DEGRADATION AND STABILITY (2005)

Article Construction & Building Technology

Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate

A Kriker et al.

CEMENT & CONCRETE COMPOSITES (2005)

Article Construction & Building Technology

Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures

CS Poon et al.

CEMENT AND CONCRETE RESEARCH (2004)

Review Materials Science, Composites

Surface modifications of natural fibers and performance of the resulting biocomposites: An overview

AK Mohanty et al.

COMPOSITE INTERFACES (2001)

Article Materials Science, Composites

Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites

AK Mohanty et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2000)