Related references
Note: Only part of the references are listed.Mode I and II interlaminar critical energy release rates in all-carbon interlayer unidirectional fibre-hybrids based on ultrahigh-modulus and high-strength fibres
Sergei B. Sapozhnikov et al.
COMPOSITE STRUCTURES (2020)
In-situ imaging of inter- and intra-laminar damage in open-hole tension tests of carbon fibre-reinforced composites
Fatih E. Oz et al.
COMPOSITE STRUCTURES (2020)
Pseudo-ductile unidirectional high modulus/high strength carbon fibre hybrids using conventional ply thickness prepregs
S. B. Sapozhnikov et al.
COMPOSITES PART B-ENGINEERING (2020)
Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies
A. Sasikumar et al.
COMPOSITE STRUCTURES (2019)
Design of Pseudoductile Unidirectional Hybrid Composites Based on the Model of a Dry Bundle
S. B. Sapozhnikov et al.
MECHANICS OF COMPOSITE MATERIALS (2019)
Multi-instrument in-situ damage monitoring in quasi-isotropic CFRP laminates under tension
Fatih E. Oz et al.
COMPOSITE STRUCTURES (2018)
Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites
Gergely Czel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates
Mohamad Fotouhi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A Modified Empirical Wavelet Transform for Acoustic Emission Signal Decomposition in Structural Health Monitoring
Shaopeng Dong et al.
SENSORS (2018)
Design and characterisation of high performance, pseudo-ductile all-carbon/epoxy unidirectional hybrid composites
Gergely Czel et al.
COMPOSITES PART B-ENGINEERING (2017)
Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites
Gergely Czel et al.
COMPOSITE STRUCTURES (2016)
Unification of strength scaling between unidirectional, quasi-isotropic, and notched carbon/epoxy laminates
Xiaodong Xu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission
Mohamad Fotouhi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Thickness-dependence of the translaminar fracture toughness: Experimental study using thin-ply composites
R. F. Teixeira et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Feasibility and limitations of damage identification in composite materials using acoustic emission
Emmanuel Maillet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies
Gergely Czel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates
J. D. Fuller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres
HaNa Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Transverse cracking in carbon fiber reinforced polymer composites: Modal acoustic emission and peak frequency analysis
Christopher Baker et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg
Gergely Czel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Tensile properties of polyacrylonitrile- and pitch-based hybrid carbon fiber/polyimide composites with some nanoparticles in the matrix
Kimiyoshi Naito
JOURNAL OF MATERIALS SCIENCE (2013)
On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses
R. Gutkin et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)
Comparison of open hole tension characteristics of high strength glass and carbon fibre-reinforced composite materials
R. M. O'Higgins et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event
CR Ramirez-Jimenez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)