Related references
Note: Only part of the references are listed.Laser additive manufactured high-performance Fe-based composites with unique strengthening structure
Hongyu Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy
Ya'nan Liu et al.
CERAMICS INTERNATIONAL (2021)
Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
Hongmei Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Ductile damage assessment of Ti6Al4V, 17-4PH and AlSi10Mg for additive manufacturing
F. Nalli et al.
ENGINEERING FRACTURE MECHANICS (2021)
Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite
Zongbiao Dai et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
In-situ observation of asymmetrical deformation around inclusion in a heterogeneous additively manufactured 316L stainless steel
Decheng Kong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction
Hongyu Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Influence of Specimen Layout on 17-4PH (AISI 630) Alloys Fabricated by Low-Cost Additive Manufacturing
Chanun Suwanpreecha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
Corrosion resistance of 13wt.% Cr martensitic stainless steels: Additively manufactured CX versus wrought Ni-containing AISI 420
Ayda Shahriari et al.
CORROSION SCIENCE (2021)
Effect of scanning strategy on the microstructure, texture, and mechanical properties of 15-5PH stainless steel processed by selective laser melting
X. D. Nong et al.
MATERIALS CHARACTERIZATION (2021)
Additive manufacturing of multi-scale heterostructured high-strength steels
Chaolin Tan et al.
MATERIALS RESEARCH LETTERS (2021)
Tribological properties of carbon nanotube/SiO2 combinations as water-based lubricant additives for magnesium alloy
Hongmei Xie et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Realization of synergistic enhancement for fracture strength and ductility by adding TiC particles in wire and arc additive manufacturing 2219 aluminium alloy
Peng Jin et al.
COMPOSITES PART B-ENGINEERING (2021)
Influence of oxides on the cryogenic tensile properties of the laser aided additive manufactured CoCrNi medium entropy alloy
Fei Weng et al.
COMPOSITES PART B-ENGINEERING (2021)
Effects of geometry, location, and direction on microstructure and mechanical properties of 15-5PH stainless steel fabricated by directed energy deposition
X. D. Nong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy
Ying Yang et al.
NATURE (2021)
Material-structure-performance integrated laser-metal additive manufacturing
Dongdong Gu et al.
SCIENCE (2021)
The synthesis of TiC dispersed strengthened Mo alloy by freeze-drying technology and subsequent low temperature sintering
Weiqiang Hu et al.
SCRIPTA MATERIALIA (2021)
Superior strength-ductility in laser aided additive manufactured high-strength steel by combination of intrinsic tempering and heat treatment
Chaolin Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
On the fatigue crack propagation mechanism of a TiB2-reinforced high-modulus steel
Bochuan Li et al.
COMPOSITES PART B-ENGINEERING (2020)
Strength-ductility trade-off via SiC nanoparticle dispersion in A356 aluminium matrix
R. Taherzadeh Mousavian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High strength (∼2000 MPa) or highly ductile (∼11%) additively manufactured H13 by tempering at different conditions
Jujie Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties
X. D. Nong et al.
SCRIPTA MATERIALIA (2020)
Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate
M. Wang et al.
ACTA MATERIALIA (2020)
Making ultrastrong steel tough by grain-boundary delamination
L. Liu et al.
SCIENCE (2020)
Microstructure and mechanical properties of A-TIG welded AISI 316L SS-Alloy 800 dissimilar metal joint
Anup Kulkarni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High-strength Damascus steel by additive manufacturing
Philipp Kuernsteiner et al.
NATURE (2020)
Selective laser melting of dispersed TiC particles strengthened 316L stainless steel
Wengang Zhai et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of grain refinement on tensile properties and electrochemical behavior of Fe-18.5%Cr ferritic stainless steel
Hadi Irani et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Unmasking of the temperature window and mechanism for loss of passivation effect of a Cr-13 type martensite stainless steel
Gaoyang Wei et al.
CORROSION SCIENCE (2020)
Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect
Bo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
M. J. Bermingham et al.
ACTA MATERIALIA (2019)
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Dongdong Gu et al.
COMPOSITES PART B-ENGINEERING (2019)
The effect of η-Ni3Ti precipitates and reversed austenite on the passive film stability of nickel-rich Custom 465 steel
Li Wang et al.
CORROSION SCIENCE (2019)
Additive manufacturing of high-strength CrMnFeCoNi-based High Entropy Alloys with TiC addition
Abdukadir Amar et al.
INTERMETALLICS (2019)
Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition
Jinfeng Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Scientific, technological and economic issues in metal printing and their solutions
T. DebRoy et al.
NATURE MATERIALS (2019)
Rapid fabrication of TiN/AISI 420 stainless steel composite by selective laser melting additive manufacturing
X. Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Microstructure and mechanical properties of direct metal laser-sintered 15-5PH steel with different solution annealing heat treatments
Ala'aldin Alafaghani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Evaluation via powder metallurgy of nano-reinforced iron powders developed for selective laser melting applications
Andre Mussatto et al.
MATERIALS & DESIGN (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
Fan Zhang et al.
ACTA MATERIALIA (2018)
Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing
Ming-Yue Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Precipitation stability and micro-property of (Nb, Ti)C carbides in MMC coating
Changchun Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods
Bandar AlMangour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting
Bandar AlMangour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of stainless steel CX manufactured by Direct Metal Laser Sintering
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
Bandar AlMangour et al.
MATERIALS & DESIGN (2018)
Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons
Ming Yang et al.
CARBON (2017)
Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content
Bandar AlMangour et al.
MATERIALS & DESIGN (2016)
Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel
Guifang Sun et al.
ACTA MATERIALIA (2015)
Grain refining mechanism in the Al/Al-Ti-B system
Z. Fan et al.
ACTA MATERIALIA (2015)
The effect of tempering temperature on the microstructure and electrochemical properties of a 13 wt.% Cr-type martensitic stainless steel
Si-Yuan Lu et al.
ELECTROCHIMICA ACTA (2015)
Growth mechanism, distribution characteristics and reinforcing behavior of (Ti, Nb)C particle in laser cladded Fe-based composite coating
Qingtang Li et al.
APPLIED SURFACE SCIENCE (2014)
Evading the strength- ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Yujie Wei et al.
NATURE COMMUNICATIONS (2014)
Electrochemical characterisation of a martensitic stainless steel in a neutral chloride solution
Sabrina Marcelin et al.
ELECTROCHIMICA ACTA (2013)
Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect
A. Sanaty-Zadeh
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of Alloying on the Self-Diffusion Activation Energy in γ-Iron
A. A. Vasilyev et al.
PHYSICS OF THE SOLID STATE (2011)