4.7 Article

Morphing of bistable variable stiffness composites using distributed MFC actuators

Related references

Note: Only part of the references are listed.
Article Mechanics

Snap-through of bistable variable stiffness laminates using MFC actuators

P. M. Anilkumar et al.

Summary: Unsymmetric composite laminates exhibit multiple stable equilibrium shapes due to residual thermal stresses. MFC actuators are used to trigger snap-through, but high voltage input is required. Variable Stiffness laminates offer a larger design space and the ability to reduce actuator size.

COMPOSITE STRUCTURES (2021)

Article Mechanics

Hybrid bistable composite laminates for structural assemblies: A numerical and experimental study

Aghna Mukherjee et al.

Summary: This manuscript investigates the snap-through characteristics of a special class of hybrid bistable symmetric laminate (HBSL) under different loading constraints and imperfections through experimental and numerical studies. The insights from the research are used to demonstrate the importance of snap-through characterization in designing a smart actuation system.

COMPOSITE STRUCTURES (2021)

Article Engineering, Civil

Tailoring bistability in unsymmetrical laminates using an additional composite strip

A. Phanendra Kumar et al.

Summary: Research on unsymmetric laminates exhibiting two stable equilibrium shapes due to induced thermal residual stresses has shown that potential energy wells have a considerable influence on stable shapes and snap-through behavior. A novel strategy to realize a tunable potential energy landscape in a square bistable cross-ply laminate by attaching an additional strip has been proposed to meet the demands of morphing systems applications and metamaterial design.

THIN-WALLED STRUCTURES (2021)

Article Instruments & Instrumentation

Semi-analytical investigations on bistable cross-ply laminates with MFC actuators

A. Haldar et al.

Summary: A refined analytical model is proposed in this work to analyze multistable shapes in laminated structures, taking into account factors such as bending and balance. The model is applicable to elliptical and square plates, and its effectiveness is validated by comparing the analytical results with experimental data.

SMART MATERIALS AND STRUCTURES (2021)

Article Engineering, Multidisciplinary

Impact of hygrothermal environment on the bistability of variable stiffness laminates with curvilinear fibre paths

P. M. Anilkumar et al.

Summary: Moisture absorption in composite materials plays a significant role in the analysis and design of structural components, depending on the surrounding environment. The stress field generated by moisture absorption can cause a reduction in curvature and relaxation of actuation energy required for changing shapes. This study examines the impact of hygrothermal environment on the bistability of variable stiffness composite shells with curvilinear fiber paths, using semi-analytical formulation and numerical modeling.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING SCIENCES AND APPLIED MATHEMATICS (2021)

Article Green & Sustainable Science & Technology

Effect of morphed trailing-edge flap on aerodynamic load control for a wind turbine blade section

Chen Zhuang et al.

RENEWABLE ENERGY (2020)

Article Engineering, Aerospace

Analysis of Novel Morphing Trailing Edge Flap Actuated by Multistable Laminates

A. Haldar et al.

AIAA JOURNAL (2020)

Article Instruments & Instrumentation

Modeling of integrated shape memory alloy and Macro-Fiber Composite actuated trailing edge

Aghna Mukherjee et al.

SMART MATERIALS AND STRUCTURES (2020)

Article Instruments & Instrumentation

Self-sensing piezoelectric bistable laminates for morphing structures

V. S. C. Chillara et al.

SMART MATERIALS AND STRUCTURES (2020)

Article Mechanics

An efficient semi-analytical framework to tailor snap-through loads in bistable variable stiffness laminates

Ayan Haldar et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Article Materials Science, Multidisciplinary

Shape memory alloy-actuated prestressed composites with application to morphing automotive fender skirts

Venkata Siva C. Chillara et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2019)

Article Materials Science, Multidisciplinary

Design optimization of multistable variable-stiffness laminates

P. M. Anilkumar et al.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2019)

Article Engineering, Aerospace

Smart Morphing Wing: Optimization of Distributed Piezoelectric Actuation

Ashwin C. Henry et al.

AIAA JOURNAL (2019)

Article Engineering, Aerospace

Low energy actuation technique of bistable composites for aircraft morphing

F. Nicassio et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

Article Mechanics

Advanced nonlinear dynamic modelling of bi-stable composite plates

Zhangming Wu et al.

COMPOSITE STRUCTURES (2018)

Article Engineering, Civil

Constrained-Energy Dynamic Cross-Well Motion of Bistable Structures Subjected to Noise Disturbance

Masoud Zarepoor et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2018)

Article Instruments & Instrumentation

Dynamics and control of twisting bi-stable structures

Andres F. Arrieta et al.

SMART MATERIALS AND STRUCTURES (2018)

Article Materials Science, Composites

Vibration analysis of bi-stable composite cross-ply laminates using refined shape functions

A. Firouzian-Nejad et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Article Engineering, Electrical & Electronic

Pattern Reconfigurable Antenna Based on Morphing Bistable Composite Laminates

Jianqiang Hu et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2017)

Article Materials Science, Multidisciplinary

A piezoelectrically generated bistable laminate for morphing

Andrew J. Lee et al.

MATERIALS LETTERS (2017)

Article Engineering, Multidisciplinary

NUMERICAL AND EXPERIMENTAL STUDIES ON THE ROTATING ROTOR WITH THREE ACTIVE COMPOSITE BLADES

Andrzej Mitura et al.

EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY (2017)

Article Mechanics

Dynamic responses of cross-ply bi-stable composite laminates with piezoelectric layers

M. S. Taki et al.

ARCHIVE OF APPLIED MECHANICS (2016)

Article Mechanics

Experimental modal analysis of a rotor with active composite blades

Andrzej Teter et al.

COMPOSITE STRUCTURES (2016)

Article Engineering, Multidisciplinary

Woven type smart soft composite for soft morphing car spoiler

Min-Woo Han et al.

COMPOSITES PART B-ENGINEERING (2016)

Review Mechanics

A Review on Bistable Composite Laminates for Morphing and Energy Harvesting

Samir A. Emam et al.

APPLIED MECHANICS REVIEWS (2015)

Article Mechanics

Analysis of multistable variable stiffness composite plates

C. S. Sousa et al.

COMPOSITE STRUCTURES (2013)

Article Mechanics

Discrete approximations of the Foppl-Von Karman shell model: From coarse to more refined models

Stefano Vidoli

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Article Materials Science, Multidisciplinary

Modelling of piezoelectrically actuated bistable composites

P. F. Giddings et al.

MATERIALS LETTERS (2011)

Article Materials Science, Multidisciplinary

Finite Element Model of Smart Beams with Distributed Piezoelectric Actuators

I. M. Bendary et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2010)

Article Chemistry, Analytical

Deflection of Cross-Ply Composite Laminates Induced by Piezoelectric Actuators

Shiuh-Chuan Her et al.

SENSORS (2010)

Article Engineering, Manufacturing

Variable stiffness composite panels: Effects of stiffness variation on the in-plane and buckling response

Z. Gurdal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

Article Computer Science, Interdisciplinary Applications

Analysis of morphing, multi stable structures actuated by piezoelectric patches

Pedro Portela et al.

COMPUTERS & STRUCTURES (2008)

Article Mechanics

Distributed piezoelectric actuation of a bistable buckled beam

Corrado Maurini et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2007)

Article Engineering, Aerospace

Investigation of self-resetting active multistable laminates

Marc R. Schultz et al.

JOURNAL OF AIRCRAFT (2007)

Article Materials Science, Composites

Anticlastic stability modeling for cross-ply composites

Samer Tawfik et al.

JOURNAL OF COMPOSITE MATERIALS (2007)

Article Materials Science, Composites

Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress

M Gigliotti et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Article Mechanics

SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates

ML Dano et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

Article Materials Science, Multidisciplinary

Snap-through of unsymmetric cross-ply laminates using piezoceramic actuators

MR Schultz et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2003)