Related references
Note: Only part of the references are listed.On the application of an optimized Frequency-Phase Modulated waveform for enhanced infrared thermal wave radar imaging of composites
Saeid Hedayatrasa et al.
OPTICS AND LASERS IN ENGINEERING (2021)
Investigations on pulse compression favourable thermal imaging approaches for characterisation of glass fibre-reinforce polymers
A. Rani et al.
ELECTRONICS LETTERS (2020)
Depth resolved pulse compression favourable frequency modulated thermal wave imaging for quantitative characterization of glass fibre reinforced polymer
Anju Rani et al.
INFRARED PHYSICS & TECHNOLOGY (2020)
Coded thermal wave imaging technique for infrared non-destructive testing and evaluation
Ravibabu Mulaveesala et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2019)
Barker-coded modulation laser thermography for CFRP laminates delamination detection
Qianzhu Shi et al.
INFRARED PHYSICS & TECHNOLOGY (2019)
Performance of frequency and/or phase modulated excitation waveforms for optical infrared thermography of CFRPs through thermal wave radar: A simulation study
Saeid Hedayatrasa et al.
COMPOSITE STRUCTURES (2019)
Comparative analysis of eddy current pulsed thermography and long pulse thermography for damage detection in metals and composites
Zijun Wang et al.
NDT & E INTERNATIONAL (2019)
Digitised Frequency Modulated Thermal Wave Imaging for Non-destructive Testing and Evaluation of Glass Fibre Reinforced Polymers
Vanita Arora et al.
NONDESTRUCTIVE TESTING AND EVALUATION (2019)
Study on the Detection of CFRP Material with Subsurface Defects Using Barker-Coded Thermal Wave Imaging (BC-TWI) as a Nondestructive Inspection (NDI) Tool
Qianzhu Shi et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2018)
The use of pulse-compression thermography for detecting defects in paintings
S. Laureti et al.
NDT & E INTERNATIONAL (2018)
Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components
Francesco Ciampa et al.
SENSORS (2018)
Optimization of the pulse-compression technique applied to the infrared thermography nondestructive evaluation
Giuseppe Silipigni et al.
NDT & E INTERNATIONAL (2017)
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
N. Montinaro et al.
COMPOSITE STRUCTURES (2017)
Detection and characterisation of disbonds on Fibre Metal Laminate hybrid composites by flying laser spot thermography
N. Montinaro et al.
COMPOSITES PART B-ENGINEERING (2017)
Optically and non-optically excited thermography for composites: A review
Ruizhen Yang et al.
INFRARED PHYSICS & TECHNOLOGY (2016)
Damage Investigation in Composite Materials by Means of New Thermal Data Processing Procedures
D. Palumbo et al.
STRAIN (2016)
A review of non-destructive testing methods of composite materials
S. Gholizadeh
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
Review of pulsed thermal NDT: Physical principles, theory and data processing
Vladimir P. Vavilov et al.
NDT & E INTERNATIONAL (2015)
Lock-In Signal Post-Processing Techniques in Infra-Red Thermography for Materials Structural Evaluation
G. Pitarresi
EXPERIMENTAL MECHANICS (2015)
Barker coded excitation with linear frequency modulated carrier for ultrasonic imaging
Juan Fu et al.
BIOMEDICAL SIGNAL PROCESSING AND CONTROL (2014)
Study of inspection on metal sheet with subsurface defects using linear frequency modulated ultrasound excitation thermal-wave imaging (LFM-UTWI)
Junyan Liu et al.
INFRARED PHYSICS & TECHNOLOGY (2014)
CRACK DETECTION IN HIGH-PRESSURE TURBINE BLADES WITH FLYING SPOT ACTIVE THERMOGRAPHY IN THE SWIR RANGE
T. Maffren et al.
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 31A AND 31B (2012)
A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques
Krishnendu Chatterjee et al.
NDT & E INTERNATIONAL (2011)
Thermal Coherence Tomography Using Match Filter Binary Phase Coded Diffusion Waves
Nima Tabatabaei et al.
PHYSICAL REVIEW LETTERS (2011)
Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb Structures
Clemente Ibarra-Castanedo et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2009)
Thermal-wave radar: A novel subsurface imaging modality with extended depth-resolution dynamic range
Nima Tabatabaei et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2009)
Barker-coded ultrasound color flow imaging: Theoretical and practical design considerations
Heng Zhao et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2007)
Theory of frequency modulated thermal wave imaging for nondestructive subsurface defect detection
Ravibabu Mulaveesala et al.
APPLIED PHYSICS LETTERS (2006)
Non-destructive evaluation of aerospace materials with lock-in thermography
C Meola et al.
ENGINEERING FAILURE ANALYSIS (2006)
Recent advances in the use of infrared thermography
C Meola et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2004)
Ultrasound excited thermography using frequency modulated elastic waves
T Zweschper et al.
INSIGHT (2003)
Non-destructive control of industrial materials by means of lock-in thermography
C Meola et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2002)
Comparison between pulsed and modulated thermography in glass-epoxy laminates
G Giorleo et al.
NDT & E INTERNATIONAL (2002)
Applications of pulse heating thermography and lock-in thermography to quantitative nondestructive evaluations
T Sakagami et al.
INFRARED PHYSICS & TECHNOLOGY (2002)
Advances in pulsed phase thermography
X Maldague et al.
INFRARED PHYSICS & TECHNOLOGY (2002)
Evaluation of defects in composite plates under convective environments using lock-in thermography
W Bai et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2001)