☆ 4.5 Article

Top-down strategy for bamboo lignocellulose-derived carbon heterostructure with enhanced electromagnetic wave dissipation

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Biomass-Derived Carbon Heterostructures Enable Environmentally Adaptive Wideband Electromagnetic Wave Absorbers

Zhichao Lou et al.

Summary: This study presents the design of carbon heterostructures derived from bamboo, which exhibit excellent electromagnetic absorption performance and environmental adaptability. The assembly of nanofibers and nanosheets acts as a nanometer-sized antenna, enhancing the conductive loss. The composition of cellulose and lignin in the precursor significantly affects the assembly shape, the formation of covalent bonds, and the surface hydrophobicity. The obtained carbon heterostructure maintains wideband electromagnetic absorption in real-world environments.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Engineering, Environmental

Layered 3D structure derived from MXene/magnetic carbon nanotubes for ultra-broadband electromagnetic wave absorption

Tianqi Hou et al.

Summary: The widespread use of communication equipment has led to the deterioration of the electromagnetic environment, necessitating the development of more efficient electromagnetic wave absorption materials. By modifying Ti3C2Tx MXene composites with magnetic NiCo/Carbon nanotubes (CNTs), the absorption of electromagnetic waves is achieved.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

An angle-insensitive electromagnetic absorber enabling a wideband absorption

Zhichao Lou et al.

Summary: This article proposes a strategy to mitigate environmental pollution caused by electromagnetic waves by designing electromagnetic wave absorbers with wideband absorption capability. The effect of the absorbers' structure and the incident angle of the electromagnetic waves on the absorption performance was studied by synthesizing absorbers with different symmetric structures. It was found that non-magnetic absorbers with spatially symmetric nanostructures exhibit excellent angle-insensitivity. Finally, non-magnetic absorbers made from bamboo-derived carbon nanospheres were demonstrated to have angle-insensitivity and wideband absorption performance with a significant improvement in thickness.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Metal-organic framework-derived CoSn/NC nanocubes as absorbers for electromagnetic wave attenuation

Chenxi Wang et al.

Summary: This research presents a solvent-free method for synthesizing Co-MOF and its derivatives, and investigates their electromagnetic wave absorption properties. The obtained CoSn/NC composites show excellent performance in absorbing electromagnetic waves.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

In-situ growth of core-shell ZnFe2O4 @ porous hollow carbon microspheres as an efficient microwave absorber

Liang Chai et al.

Summary: ZnFe2O4@PHCMS composite material with excellent microwave absorption properties was successfully synthesized in this study, with a maximum adsorption capacity of -51.43 dB. Through mechanisms such as suitable impedance characteristic, dipole polarization, and interfacial polarization, effective electromagnetic wave absorption was achieved.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

A review on the waste biomass derived catalysts for biodiesel production

Muhammad Hamza et al.

Summary: Biodiesel is produced through the transesterification process of various oils and fats, with the choice of homogeneous or heterogeneous catalysts. Heterogeneous catalysts have advantages such as simple manufacturing, ease of separation, and high reusability, making them significant in biodiesel production.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Add to Collection

Review Engineering, Environmental

Sustainable biofuel and bioenergy production from biomass waste residues using microwave-assisted heating: A comprehensive review

Arjay A. Arpia et al.

Summary: The study reviews the application of MW-assisted heating for biomass pretreatment, biofuel, and bioenergy production, showing significant potential in increasing product yield and improving product properties.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Applied

Bioinspired manufacturing of oriented polysaccharides scaffolds for strong, optical haze and anti-UV/bacterial membranes

Zhe Ling et al.

Summary: A novel biomimetic dual esterification strategy was proposed for natural polysaccharides cellulose nanocrystals and galactomannan, combined with tartaric acid and benzoic anhydride. The evaporation-induced self-assembly formed an oriented quasinematic structure in the nanocomposites membranes, which exhibited excellent light scattering property and UV adsorption capability, along with high mechanical strength and antibacterial capability. This study opens up new possibilities for applications in packaging, optoelectronics, and biomonitoring sensors.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Evaluating the bio-application of biomacromolecule of lignin-carbohydrate complexes (LCC) from wheat straw in bone metabolism via ROS scavenging

Liming Zheng et al.

Summary: The study demonstrates that LCC-A has higher ROS scavenging ability for inhibiting osteoclast differentiation, while LCC-B promotes osteoblast differentiation through the antioxidant pathway, particularly in an inflammatory environment. Therapeutic administration of both LCC-A and LCC-B shows positive effects in regulating bone metabolism and preventing calvaria impairment.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Controlling and optimizing the morphology and microstructure of 3D interconnected activated carbons for high performance supercapacitors

Yanhong Lu et al.

Summary: In this study, 3D interconnected activated carbons with excellent specific surface area, meso-/macro-pore ratio, and electrical conductivity were prepared through hydrothermal carbonization and activation method. The materials displayed superior double-layer capacitive performance in an organic electrolyte system, with outstanding energy density, power density, and cycling stability. This study offers a practical method for the preparation of carbon electrode materials with controlled morphology and structure for high efficiency electrochemical energy storage devices.

NANOTECHNOLOGY (2021)

Add to Collection

Article Biochemistry & Molecular Biology

All-natural and biocompatible cellulose nanocrystals films with tunable supramolecular structure

Jie Chen et al.

Summary: Nanocomposite films were prepared by incorporating cellulose nanocrystals (CNCs) with polysaccharides such as arabinogalactan (AG), galactomannan (GM) or konjac glucomannan (KGM) using a facile casting method. The addition of polysaccharides maintained transparency, promoted UV blocking properties, and greatly improved mechanical strength of the films. The interaction between hydroxyl-abundant macromolecules, smoother and tighter morphological structures, as well as disturbed crystal structures were found to be responsible for the improved properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Rapid microwave-assisted reduction of ferromanganese spinel with biochar: Correlation between phase transformation and heating mechanism

Qing Ye et al.

Summary: This study investigated the reduction of ferromanganese spinel (MnFe2O4) in a microwave field using biochar as the reducing agent. It was found that the microwave heating mechanism was associated with phase transformation in the reduction process, and the combined use of microwave energy and sustainable reducing agent was validated for comprehensive utilization of spinel-structured metallurgical solid wastes.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Multidisciplinary Sciences

A flexible electromagnetic wave-electricity harvester

Hualiang Lv et al.

Summary: The study introduces a hybrid Sn@C composite with a biological cell-like splitting ability that enhances the efficiency of converting electromagnetic waves into electricity and heat. This material provides a promising solution for addressing electromagnetic interference with self-powered devices.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight Ni Foam-Based Ultra-Broadband Electromagnetic Wave Absorber

Ming Qin et al.

Summary: In this study, lightweight Ni foam with NiO/NiFe2O4 in situ growth composites were fabricated to address the issues of poor dispersibility and chemical stability in metal-based electromagnetic wave absorbing materials. The foam structure and NiO/NiFe2O4/Ni components were found to synergistically enhance the EM wave absorption capacity. This work sheds light on the synergistic effect of structure and components on EM wave absorption behaviors, offering a new pathway for preparing lightweight and high-performance metal-based EM wave absorbers.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Carbon-based nanomaterials for the detection of volatile organic compounds: A review

Feifei Yin et al.

Summary: Carbon-based nanomaterials have attracted much attention for their unique physical structures and excellent electric properties, making them promising high-performance sensing materials for the detection of VOCs gases. The tunability of the chemical character and surface properties of carbon-based nanomaterials allows for the construction of selective sensors targeting VOCs gases, suitable for applications in environmental gas monitoring and non-invasive disease diagnosis. These materials also offer mechanical flexibility for new designs of gas sensing platforms, putting them at the forefront of sensing materials for wearable applications.

CARBON (2021)

Add to Collection

Article Optics

Hybrid metamaterial absorber for ultra-low and dual-broadband absorption

Cheng Zhang et al.

Summary: This study introduces a hybrid metamaterial absorber composed of graphene films and conventional magnetic absorbing materials, designed for wideband absorption performance at ultra-low frequencies. Experimental results validate the effectiveness of the design method, highlighting its lightweight and environmentally adaptable engineering value.

OPTICS EXPRESS (2021)

Add to Collection

Article Forestry

Understanding the local structure of disordered carbons from cellulose and lignin

Yujie Meng et al.

Summary: An electron microscopy investigation was performed to understand the relationship between the microstructure and properties of carbonized cellulose and lignin, revealing structural differences that explain the higher surface area and porosity of carbonized cellulose. Additionally, the presence of certain well-ordered carbon in carbonized lignin indicates potential for obtaining acceptable moduli of carbon fiber from lignin with appropriate modifications. This research contributes to an improved understanding of the carbonization mechanism of cellulose and lignin components in biomass materials.

WOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Enhanced electromagnetic wave absorption performance of core-shell Fe3O4@poly(3,4-ethylenedioxythiophene) microspheres/reduced graphene oxide composite

Xudong Liu et al.

Summary: Fe3O4@PEDOT/rGO composite with efficient EM wave absorption properties is prepared in this study. The composite shows enhanced absorption performance with a wide effective absorption bandwidth, and the absorption mechanism is explained in detail.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

In situ construction of 3-dimensional hierarchical carbon nanostructure; investigation of the synthesis parameters and hydrogen evolution reaction performance

Khaled Tawfik Alali et al.

Summary: The hierarchical 3D carbon nanostructures, constructed through combining electrospinning with in situ CVD technologies, show promising applicability in electrochemical energy applications. The experimental demonstration highlights the impact of catalysis type, immersion solution, carbon sources, and treatment temperature on the structure.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Recent advances in graphene-based films for electromagnetic interference shielding: Review and future prospects

Yao Chen et al.

Summary: With the development of electronic information technology, electromagnetic shielding materials have become important in solving problems caused by electromagnetic waves, with graphene attracting significant attention for its outstanding properties.

CARBON (2021)

Add to Collection

Article Chemistry, Physical

Prussian blue analogue derived carbon-based composites toward lightweight microwave absorption

Xiaohui Liang et al.

Summary: Different carbon-based composites derived from metal organic frameworks (MOFs) have shown significant tuning effects on microwave absorption through various annealing atmospheres, demonstrating excellent performance under different thicknesses. These composites have promising applications due to their strong microwave attenuation capability and broad effective absorption bandwidth.

CARBON (2021)

Add to Collection

Article Engineering, Multidisciplinary

In-situ formation of low-dimensional, magnetic core-shell nanocrystal for electromagnetic dissipation

Zhichao Lou et al.

Summary: This study successfully synthesized monodispersed core-shell nanocrystals composed of a magnetic iron-based core and graphitized carbon shell, with controllable core component by altering the amount of lignin. The optimized sub-13-nm-sized Fe-C nanocrystal exhibited an ultra-wide electromagnetic absorption range and a minimum reflection loss value as low as -47.11 dB at 8.0 GHz.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Gelatin-derived N-doped hybrid carbon nanospheres with an adjustable porous structure for enhanced electromagnetic wave absorption

Xiaoke Lu et al.

Summary: A novel gelatin-derived N-doped hybrid carbon nanospheres with adjustable porous structure (PGCNs) were successfully fabricated in this work, showing good electromagnetic wave absorbing performance. The porous structure on PGCNs could be tuned by changing the alkaline addition, leading to optimized absorbing properties.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Fabrication of Crack-Free Flattened Bamboo and Its Macro-/Micro-Morphological and Mechanical Properties

Zhichao Lou et al.

Summary: This study successfully produced flattened bamboo boards with higher bending strength by optimizing the softening parameters, compacting the bamboo texture through the action of nails and rolling processes, and reducing the mechanical penalties associated with flattening.

JOURNAL OF RENEWABLE MATERIALS (2021)

Add to Collection

Review Engineering, Environmental

Understanding structure-performance correlation of biochar materials in environmental remediation and electrochemical devices

Chencheng Qin et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Phenolic foam-derived magnetic carbon foams (MCFs) with tunable electromagnetic wave absorption behavior

Zhichao Lou et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Catalytic properties of reduced graphene oxide in acetylene hydrogenation

A. A. Abakumov et al.

CARBON (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources

Burhan Ates et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

On-Demand Regulation of Lignocellulosic Nanofibrils Based on Rapid Fractionation Using Acid Hydrotrope: Kinetic Study and Characterization

Huiyang Bian et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Agricultural Engineering

A critical review of the production and advanced utilization of biochar via selective pyrolysis of lignocellulosic biomass

Yunchao Li et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Hollow porous CoNi/C composite nanomaterials derived from MOFs for efficient and lightweight electromagnetic wave absorber

Yan-Li Wang et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

A multilevel gradient structural carbon derived from naturally preprocessed biomass

Chao Wang et al.

CARBON (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of carbonization temperature on mechanical properties and biocompatibility of biochar/ultra-high molecular weight polyethylene composites

Suiyi Li et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Well-Defined Lignin Model Films from Colloidal Lignin Particles

Muhammad Farooq et al.

LANGMUIR (2020)

Add to Collection

Review Chemistry, Physical

Fabrication of low-cost carbon fibers using economical precursors and advanced processing technologies

Dalsu Choi et al.

CARBON (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Graphene-Based Materials toward Microwave and Terahertz Absorbing Stealth Technologies

Honghui Chen et al.

ADVANCED OPTICAL MATERIALS (2019)

Add to Collection

Article Forestry

Comparison of pyrolyzed lignin before and after milled wood lignin purification of Norway spruce with increasing steam explosion

Ida Aarum et al.

WOOD SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Structure evolution mechanism of highly ordered graphite during carbonization of cellulose nanocrystals

Youngho Eom et al.

CARBON (2019)

Add to Collection

Review Agricultural Engineering

Advances in production and application of biochar from lignocellulosic feedstocks for remediation of environmental pollutants

P. R. Yaashikaa et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Cascade utilization of lignocellulosic biomass to high-value products

Yanrong Liu et al.

GREEN CHEMISTRY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

W. Schutyser et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

On the morphology and structure formation of carbon fibers from polymer precursor systems

Muhannad Al Aiti et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Environmental

A Direct Observation of the Fine Aromatic Clusters and Molecular Structures of Biochars

Xin Xiao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Covalently Connected Carbon Nanostructures for Current Collectors in Both the Cathode and Anode of Li-S Batteries

Song Jin et al.

ADVANCED MATERIALS (2016)

Add to Collection

Review Physics, Applied

Synthesis, properties and applications of 3D carbon nanotube-graphene junctions

Chun-Yu Lin et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2016)

Add to Collection

Article Chemistry, Physical

Influence of hydrothermal carbonization on formation of curved graphite structures obtained from a lignocellulosic precursor

Gabriela Borin Barin et al.

CARBON (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Topological Defects: Origin of Nanopores and Enhanced Adsorption Performance in Nanoporous Carbon

Junjie Guo et al.

SMALL (2012)

Add to Collection

Review Biotechnology & Applied Microbiology

Biomass pretreatment: Fundamentals toward application

Valery B. Agbor et al.

BIOTECHNOLOGY ADVANCES (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose nanomaterials review: structure, properties and nanocomposites

Robert J. Moon et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Review Agricultural Engineering

Features of promising technologies for pretreatment of lignocellulosic biomass

N Mosier et al.

BIORESOURCE TECHNOLOGY (2005)

Add to Collection

Letter Chemistry, Physical

Effects of activation conditions on preparation of porous carbon from rice husk

YP Guo et al.

CARBON (2003)

Add to Collection

Article Polymer Science

Novel applications of lignin in composite materials

W Thielemans et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.