4.8 Review

Promotion Strategies of Hole Transport Materials by Electronic and Steric Controls for n-i-p Perovskite Solar Cells

Related references

Note: Only part of the references are listed.
Article Optics

Large-area perovskite solar cells employing spiro-Naph hole transport material

Mingyu Jeong et al.

Summary: By utilizing a symmetry-tuned strategy at the molecular level, we have developed a new class of spiro-Naph analogues as the hole transport material in perovskite solar cells, resulting in improved stability and power conversion efficiency.

NATURE PHOTONICS (2022)

Article Polymer Science

Stability Improvement of Perovskite Solar Cells by the Moisture-Resistant PMMA:Spiro-OMeTAD Hole Transport Layer

Shaohua Ma et al.

Summary: This study explores the use of a PMMA-doped spiro-OMeTAD hole transport layer to improve the stability of perovskite solar cells (PSCs). It is found that PMMA effectively enhances the moisture and oxygen resistance of spiro-OMeTAD, resulting in improved device stability by separating the perovskite layer from moisture and oxygen.

POLYMERS (2022)

Article Energy & Fuels

A bilayer conducting polymer structure for planar perovskite solar cells with over 1,400 hours operational stability at elevated temperatures

Yicheng Zhao et al.

Summary: The study identified stable perovskite compositions under heat and light stress and proposed a bilayer polymer contact structure that enabled over 1,400 hours of stable operation at 65 degrees Celsius for perovskite solar cells.

NATURE ENERGY (2022)

Article Energy & Fuels

Evolution of defects during the degradation of metal halide perovskite solar cells under reverse bias and illumination

Zhenyi Ni et al.

Summary: The study reveals the location, mechanisms, and defects involved in the performance degradation of p-i-n perovskite solar cells under illumination or reverse bias. The efficiency decreases over time, yet the introduction of a hole-blocking layer between the layers can improve the reverse-bias stability. Charged iodide interstitial defects within the device layers are observed and found to contribute to efficiency degradation under both light and reverse bias conditions.

NATURE ENERGY (2022)

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

Article Chemistry, Multidisciplinary

Perovskite Quantum Wells Formation Mechanism for Stable Efficient Perovskite Photovoltaics-A Real-Time Phase-Transition Study

Hanlin Hu et al.

Summary: The study investigates the use of a combination of bulk 3D and reduced dimensional perovskite layers to enhance the performance of perovskite solar cells, achieving efficiencies exceeding 22% and significantly improving device stability by controlling the ionic reaction during organic cation coating process to optimize the PQWs/3D architecture.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Intramolecular Electric Field Construction in Metal Phthalocyanine as Dopant-Free Hole Transporting Material for Stable Perovskite Solar Cells with >21 % Efficiency

Zefeng Yu et al.

Summary: Ni phthalocyanine (NiPc)with methoxyethoxy units as HTMs showed improved conductivity and hole mobility in PSCs, achieving a record efficiency of 21.23%. The extracted holes in NiPc are mainly concentrated on the phthalocyanine core and transferred between molecules, demonstrating good stability in moisture, heating, and light.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

Nanoscale localized contacts for high fill factors in polymer-passivated perovskite solar cells

Jun Peng et al.

Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.

SCIENCE (2021)

Article Chemistry, Multidisciplinary

Reducing Energy Disorder of Hole Transport Layer by Charge Transfer Complex for High Performance p-i-n Perovskite Solar Cells

Guiying Xu et al.

Summary: The study introduces a charge-transfer complex (CTC) strategy to reduce energy disorder in organic semiconductor charge-transport layers (OS-CTLs) and enhance the performance of p-i-n planar perovskite solar cells (pero-SCs).

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Chemistry, Multidisciplinary

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Hongwei Zhu et al.

Summary: The study introduces a trifluoromethylation strategy using TFMBAI and TFP as additives to improve the PCE and moisture resistance of PSCs. By surface treating the perovskite with TFMBAI and adding TFP to the HTL, the PSCs achieved a higher efficiency and improved durability against moisture attack.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Chemistry, Physical

Selective Defect Passivation and Topographical Control of 4-Dimethylaminopyridine at Grain Boundary for Efficient and Stable Planar Perovskite Solar Cells

Seulki Song et al.

Summary: The introduction of DMAP in perovskite solar cells has been shown to improve device efficiency and stability by modifying grain boundaries and enhancing adhesion strength between materials.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Perovskite Quantum Dots as Multifunctional Interlayers in Perovskite Solar Cells with Dopant-Free Organic Hole Transporting Layers

Fangwen Cheng et al.

Summary: The introduction of perovskite quantum dots as interlayers in perovskite solar cells significantly enhances their performance, efficiency, and stability. These quantum dots play a universal role in improving the interactions between different materials, showing great potential for commercial applications.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Photoemission Study of Charge Transfer between ET (BEDT-TTF) and Acceptors F6TCNNQ and F2TCNQ

Robert Kuhrt et al.

Summary: The study investigated charge transfer reactions between the organic semiconductor BEDT-TTF (ET) and the electron acceptors F(2)TCNQ and F(6)TCNNQ using photoemission spectroscopy. The results showed higher charge transfer at the ET/F(6)TCNNQ interface, with additional contributions from the sulfur atoms of ET to the core level spectra. Valence spectra revealed occupation of the acceptor's LUMO, and interfaces did not show signs of occupied density of states at the Fermi level. Work function progression indicated relatively sharp interfaces for ET and F(6)TCNNQ, while signs of interdiffusion were observed for the ET/F(2)TCNQ combination.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Article Multidisciplinary Sciences

CO2 doping of organic interlayers for perovskite solar cells

Jaemin Kong et al.

Summary: A fast and reproducible doping method has been reported in this study, involving bubbling a spiro-OMeTAD:LiTFSI solution with CO2 under ultraviolet light. This method quickly promotes p-type doping of spiro-OMeTAD, resulting in significantly higher conductivity without the need for any post-treatments.

NATURE (2021)

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Article Chemistry, Physical

Thermal Management Enables More Efficient and Stable Perovskite Solar Cells

Fengtao Pei et al.

Summary: Under thermal stress, the introduction of silicon dioxide particles can enhance the long-term stability and power conversion efficiency of perovskite solar cells, especially achieving significant improvement in a thermally stable composition.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Sandwiched electrode buffer for efficient and stable perovskite solar cells with dual back surface fields

Huachao Zai et al.

Summary: The research utilized sandwiched electrode buffer technology to enhance the efficiency and stability of perovskite solar cells, leading to improved performance of PSCs in practical applications.

JOULE (2021)

Article Energy & Fuels

Simultaneous Improvement of the Power Conversion Efficiency and Stability of Perovskite Solar Cells by Doping PMMA Polymer in Spiro-OMeTAD-Based Hole-Transporting Layer

Pufeihong Xia et al.

Summary: Adding long-chain polymer or PMMA into the spiro-OMeTAD matrix improves film formation process and device performance, resulting in increased open-circuit voltage, fill factor, and power conversion efficiency for perovskite solar cells.

SOLAR RRL (2021)

Review Chemistry, Multidisciplinary

Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells

Florine M. Rombach et al.

Summary: Organic semiconductors are crucial in thin-film electronic devices, especially as hole transport layers (HTLs) in perovskite solar cells (PSCs). Spiro-OMeTAD and PTAA have been the leading materials for high efficiency HTLs, with research on their properties contributing to a better understanding of their success mechanisms. This review provides key insights into the electronic and morphological properties, doping strategies, and degradation pathways of spiro-OMeTAD and PTAA, guiding the development of future HTL materials with improved stability and efficiency for PSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 24%

Min Ju Jeong et al.

Summary: By incorporating gallium(iii) acetylacetonate into organic hole-transporting materials without additional surface treatment processes, the interface engineering strategy efficiently reduces the recombination loss and enhances the performance of perovskite solar cells. This method significantly improves the power conversion efficiency of PSCs and maintains stability without hygroscopic additives, showing a promising route for high performance and commercialization.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Physical

Synergetic effects of electrochemical oxidation of Spiro-OMeTAD and Li+ ion migration for improving the performance of n-i-p type perovskite solar cells

Changzeng Ding et al.

Summary: This study demonstrates the oxidation mechanism of Spiro-OMeTAD in perovskite solar cells using various analysis methods, and confirms the involvement of Li+ migration in the oxidation process.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Physical

Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review

Guanhua Ren et al.

Summary: This review mainly discusses the impact of different doping strategies and mechanisms on device performance and stability in organic-inorganic hybrid perovskite solar cells, along with the development of potential dopants to address stability issues in doped spiro-OMeTAD based PSCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Reducing Detrimental Defects for High-Performance Metal Halide Perovskite Solar Cells

Luis K. Ono et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Physical

Perovskite Solar Cells: Can We Go Organic-Free, Lead-Free, and Dopant-Free?

Tsutomu Miyasaka et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Physical

Development of Dopant-Free Organic Hole Transporting Materials for Perovskite Solar Cells

Hong Duc Pham et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Studies of Langmuir and Langmuir-Schaefer Films of Poly(3-Hexylthiophene) and Poly(Vinylidene Fluoride)

Rafaela Cristina Sanfelice et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2020)

Article Chemistry, Physical

Incorporation of Vanadium(V) Oxide in Hybrid Hole Transport Layer Enables Long-term Operational Stability of Perovskite Solar Cells

Marina M. Tepliakova et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Materials Science, Multidisciplinary

Influence of dopant size and doping method on the structure and thermoelectric properties of PBTTT films doped with F6TCNNQ and F4TCNQ

Vishnu Vijayakumar et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

Review Chemistry, Multidisciplinary

Causes and Solutions of Recombination in Perovskite Solar Cells

Jiangzhao Chen et al.

ADVANCED MATERIALS (2019)

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Article Chemistry, Physical

Deep Defect States in Wide-Band-Gap ABX3 Halide Perovskites

Igal Levine et al.

ACS ENERGY LETTERS (2019)

Article Nanoscience & Nanotechnology

Hole-Transport Layer Molecular Weight and Doping Effects on Perovskite Solar Cell Efficiency and Mechanical Behavior

Inhwa Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

Tuning Optical Properties of Conjugated Molecules by Lewis Acids: Insights from Electronic Structure Modeling

Hung Phan et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Article Chemistry, Physical

Towards understanding the doping mechanism of organic semiconductors by Lewis acids

Brett Yurash et al.

NATURE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Hole-Transporting Materials Incorporating Carbazole into Spiro-Core for Highly Efficient Perovskite Solar Cells

Xiang-Doug Zhu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Multidisciplinary

Solution-Processed Metal Oxide Nanocrystals as Carrier Transport Layers in Organic and Perovskite Solar Cells

Dan Ouyang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Materials Science, Multidisciplinary

Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering

Qian-Qian Chu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer

Ruihao Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Article Nanoscience & Nanotechnology

Mixtures of Dopant-Free Spiro-OMeTAD and Water-Free PEDOT as a Passivating Hole Contact in Perovskite Solar Cells

Lukas Kegelmann et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Multidisciplinary

Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices

Tae-Hee Han et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

High performance and stable perovskite solar cells using vanadic oxide as a dopant for spiro-OMeTAD

Xiaobing Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Efficiency vs. stability: dopant-free hole transporting materials towards stabilized perovskite solar cells

Kasparas Rakstys et al.

CHEMICAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

Long-Term Stability of the Oxidized Hole-Transporting Materials used in Perovskite Solar Cells

Ernestas Kasparavicius et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Review Chemistry, Multidisciplinary

Recent advances in the design of dopant-free hole transporting materials for highly efficient perovskite solar cells

Xianglang Sun et al.

CHINESE CHEMICAL LETTERS (2018)

Article Chemistry, Physical

Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells

Jiangzhao Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Review Chemistry, Physical

Less is More: Dopant-Free Hole Transporting Materials for High-Efficiency Perovskite Solar Cells

Weiqi Zhou et al.

ADVANCED ENERGY MATERIALS (2018)

Review Materials Science, Multidisciplinary

Doped Charge-Transporting Layers in Planar Perovskite Solar Cells

Zhao-Kui Wang et al.

ADVANCED OPTICAL MATERIALS (2018)

Article Chemistry, Physical

An integrated organic-inorganic hole transport layer for efficient and stable perovskite solar cells

Yaxiong Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Molecular versus polymeric hole transporting materials for perovskite solar cell application

Maria Ulfa et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Multidisciplinary

Li dopant induces moisture sensitive phase degradation of an all-inorganic CsPbI2Br perovskite

Yihui Li et al.

CHEMICAL COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Novel p-dopant toward highly efficient and stable perovskite solar cells

Ji-Youn Seo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Sequentially Fluorinated PTAA Polymers for Enhancing V-OC of High-Performance Perovskite Solar Cells

Youngwoong Kim et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Unveiling the Role of tBP-LiTFSI Complexes in Perovskite Solar Cells

Shen Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Review Chemistry, Multidisciplinary

A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Po-Kai Kung et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Chemistry, Physical

Surface modification of a hole transporting layer for an efficient perovskite solar cell with an enhanced fill factor and stability

Mohammad Mahdi Tavakoli et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2018)

Article Chemistry, Multidisciplinary

Improving the moisture stability of perovskite solar cells by using PMMA/P3HT based hole-transport layers

Soumya Kundu et al.

MATERIALS CHEMISTRY FRONTIERS (2018)

Article Materials Science, Multidisciplinary

Dual interfacial modification engineering with p-type NiO nanocrystals for preparing efficient planar perovskite solar cells

Weina Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Chemistry, Physical

Investigating the Role of 4-Tert Butylpyridine in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Carbon Nanotubes in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Multidisciplinary

Extrinsic ion migration in perovskite solar cells

Zhen Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Review Multidisciplinary Sciences

Promises and challenges of perovskite solar cells

Juan-Pablo Correa-Baena et al.

SCIENCE (2017)

Review Chemistry, Physical

Metal Oxides as Efficient Charge Transporters in Perovskite Solar Cells

Md Azimul Haque et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Synthesis and use of a hyper-connecting crosslinking agent in the hole-transporting layer of perovskite solar cells

Brian L. Watson et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells

Zonghao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Low-temperature solution-processed NiOx films for air-stable perovskite solar cells

Jie Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Cu(II) Complexes as p-Type Dopants in Efficient Perovskite Solar Cells

Cheng Chen et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Physical

Severe Morphological Deformation of Spiro-OMeTAD in (CH3NH3)Pbl3 Solar Cells at High Temperature

Ajay Kumar Jena et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Physical

Dopant-Free Planar n-i-p Perovskite Solar Cells with Steady-State Efficiencies Exceeding 18%

Severin N. Habisreutinger et al.

ACS ENERGY LETTERS (2017)

Article Multidisciplinary Sciences

Charge Injection, Carriers Recombination and HOMO Energy Level Relationship in Perovskite Solar Cells

Jesus Jimenez-Lopez et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Multidisciplinary

Benzoyl Peroxide as an Efficient Dopant for Spiro-OMeTAD in Perovskite Solar Cells

Qiuju Liu et al.

CHEMSUSCHEM (2017)

Article Nanoscience & Nanotechnology

Covalently Functionalized SWCNTs as Tailored p-Type Dopants for Perovskite Solar Cells

Tanja Miletic et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

High-Work-Function Molybdenum Oxide Hole Extraction Contacts in Hybrid Organic-Inorganic Perovskite Solar Cells

Philip Schulz et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Physical

Role of the Dopants on the Morphological and Transport Properties of Spiro-MeOTAD Hole Transport Layer

Emilio J. Juarez-Perez et al.

CHEMISTRY OF MATERIALS (2016)

Article Chemistry, Multidisciplinary

Cuprous Oxide as a Potential Low-Cost Hole-Transport Material for Stable Perovskite Solar Cells

Bahram Abdollahi Nejand et al.

CHEMSUSCHEM (2016)

Article Chemistry, Multidisciplinary

Dopant-Free Hole-Transporting Material with a C3h Symmetrical Truxene Core for Highly Efficient Perovskite Solar Cells

Chuyi Huang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Energy & Fuels

Light-induced effects on Spiro-OMeTAD films and hybrid lead halide perovskite solar cells

Rafael S. Sanchez et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Article Chemistry, Physical

Copper Salts Doped Spiro-OMeTAD for High-Performance Perovskite Solar Cells

Meng Li et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Multidisciplinary

Investigation on a dopant-free hole transport material for perovskite solar cells

Fei Wu et al.

RSC ADVANCES (2016)

Article Materials Science, Multidisciplinary

Copper iodide as a potential low-cost dopant for spiro-MeOTAD in perovskite solar cells

Peng Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Article Nanoscience & Nanotechnology

p-Type Doping of Poly(3-hexylthiophene) with the Strong Lewis Acid Tris(pentafluorophenyl)borane

Patrick Pingel et al.

ADVANCED ELECTRONIC MATERIALS (2016)

Article Chemistry, Physical

Copper Thiocyanate Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Vinod E. Madhavan et al.

ACS ENERGY LETTERS (2016)

Article Nanoscience & Nanotechnology

Spectrum-Dependent Spiro-OMeTAD Oxidization Mechanism in Perovskite Solar Cells

Shen Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Nanoscience & Nanotechnology

Colloidal CuInS2 Quantum Dots as Inorganic Hole-Transporting Material in Perovskite Solar Cells

Mei Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

A simple spiro-type hole transporting material for efficient perovskite solar cells

Paramaguru Ganesan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Physical

Charge Transfer Dynamics from Organometal Halide Perovskite to Polymeric Hole Transport Materials in Hybrid Solar Cells

Jan C. Brauer et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Article Chemistry, Multidisciplinary

Increased Mobility Induced by Addition of a Lewis Acid to a Lewis Basic Conjugated Polymer

Peter Zalar et al.

ADVANCED MATERIALS (2014)

Article Chemistry, Multidisciplinary

A dual functional additive for the HTM layer in perovskite solar cells

Hong Zhang et al.

CHEMICAL COMMUNICATIONS (2014)

Article Chemistry, Physical

Enhanced Hole Extraction in Perovskite Solar Cells Through Carbon Nanotubes

Severin N. Habisreutinger et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Chemistry, Multidisciplinary

Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

An Inorganic Hole Conductor for Organo-Lead Halide Perovskite Solar Cells. Improved Hole Conductivity with Copper Iodide

Jeffrey A. Christians et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

o-Methoxy Substituents in Spiro-OMeTAD for Efficient Inorganic-Organic Hybrid Perovskite Solar Cells

Nam Joong Jeon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Chemistry, Multidisciplinary

Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells

Severin N. Habisreutinger et al.

NANO LETTERS (2014)

Article Materials Science, Multidisciplinary

CH3NH3PbI3/poly-3-hexylthiophen perovskite mesoscopic solar cells: Performance enhancement by Li-assisted hole conduction

Jin Hyuck Heo et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2014)

Article Chemistry, Physical

Influence of ionizing dopants on charge transport in organic semiconductors

Antonio Abate et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Article Multidisciplinary Sciences

Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency

Peng Qin et al.

NATURE COMMUNICATIONS (2014)

Article Chemistry, Physical

Co(III) Complexes as p-Dopants in Solid-State Dye-Sensitized Solar Cells

Julian Burschka et al.

CHEMISTRY OF MATERIALS (2013)

Article Chemistry, Physical

Improvement in Solid-State Dye Sensitized Solar Cells by p-Type Doping with Lewis Acid SnCl4

Mi Xu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Article Chemistry, Multidisciplinary

Protic Ionic Liquids as p-Dopant for Organic Hole Transporting Materials and Their Application in High Efficiency Hybrid Solar Cells

Antonio Abate et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

Article Materials Science, Multidisciplinary

Comprehensive picture of p-type doping of P3HT with the molecular acceptor F4TCNQ

P. Pingel et al.

PHYSICAL REVIEW B (2013)

Article Chemistry, Physical

Energy Level Shifts in Spiro-OMeTAD Molecular Thin Films When Adding Li-TFSI

Rebecka Scholin et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2012)

Article Chemistry, Multidisciplinary

Tunable Crystallinity in Regioregular Poly(3-Hexylthiophene) Thin Films and Its Impact on Field Effect Mobility

Avishek R. Aiyar et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Article Chemistry, Multidisciplinary

Use of a High Electron-Affinity Molybdenum Dithiolene Complex to p-Dope Hole-Transport Layers

Yabing Qi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Chemistry, Physical

Ionic-liquid materials for the electrochemical challenges of the future

Michel Armand et al.

NATURE MATERIALS (2009)