Related references
Note: Only part of the references are listed.MFiX based multi-scale CFD simulations of biomass fast pyrolysis: A review
Liqiang Lu et al.
CHEMICAL ENGINEERING SCIENCE (2022)
Coarse-grained CFD-DEM modelling of dense gas-solid reacting flow
Shuai Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)
Particle-scale evaluation of the pyrolysis process of biomass material in a reactive gas-solid spouted reactor
Shiliang Yang et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Multifluid modeling of coal pyrolysis in a coupled downer-hopper reactor
Shuyue Li et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)
Development of a robust Eulerian-Lagrangian model for the simulation of an industrial solid-fluid system
Yuki Mori et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Effect of Stefan flow on the drag force in flow past random arrays of spheres
Xihao Chen et al.
CHEMICAL ENGINEERING JOURNAL (2021)
On the treatment of bed-to-wall heat transfer in CFD-DEM simulations of gas-fluidized beds
Xin Liu et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Statistical foundation of EMMS-based two-fluid models for heterogeneous gas-solid flow
Bidan Zhao et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Flow and heat mass performances of wet particle drying process based on liquid volume-varying bridge force
Tianqi Tang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
CFD-DEM study of the effects of food grain properties on drying and shrinkage in a fluidised bed
Jannatul Azmir et al.
POWDER TECHNOLOGY (2020)
Massively parallel numerical simulation using up to 36,000 CPU cores of an industrial-scale polydispersed reactive pressurized fluidized bed with a mesh of one billion cells
Herve Neau et al.
POWDER TECHNOLOGY (2020)
Continuum theory for dense gas-solid flow: A state-of-the-art review
Junwu Wang
CHEMICAL ENGINEERING SCIENCE (2020)
A CFD-DEM-IBM method for Cartesian grid simulation of gas-solid flow in complex geometries
Peng Zhao et al.
CHEMICAL ENGINEERING JOURNAL (2020)
A computational fluid dynamics-discrete element-immersed boundary method for Cartesian grid simulation of heat transfer in compressible gas-solid flow with complex geometries
Peng Zhao et al.
PHYSICS OF FLUIDS (2020)
Immersed boundary methods for fluid-structure interaction: A review
Woojin Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2019)
Validation study on a scaling law model of the DEM in industrial gas-solid flows
Yuki Mori et al.
POWDER TECHNOLOGY (2019)
CFD-DEM simulation of drying of food grains with particle shrinkage
Jannatul Azmir et al.
POWDER TECHNOLOGY (2019)
Multiscale structures in particle-fluid systems: Characterization, modeling, and simulation
Wei Ge et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Numerical simulation and experimental validation of oil shale drying in pneumatic conveying dryer
Liangzhi Xia et al.
DRYING TECHNOLOGY (2018)
Discrete particle simulation of food grain drying in a fluidised bed
Jannatul Azmir et al.
POWDER TECHNOLOGY (2018)
A comprehensive review on modeling of pneumatic and flash drying
Salem Banooni et al.
DRYING TECHNOLOGY (2018)
Drying behaviors of low-rank coal under negative pressure: Kinetics and model
LingKun Rong et al.
DRYING TECHNOLOGY (2017)
Experimental and numerical analysis of oil shale drying in fluidized bed
Liangzhi Xia et al.
DRYING TECHNOLOGY (2017)
Simulation of flow and drying characteristics of high-moisture particles in an impinging stream dryer via CFD-DEM
Patiwat Khomwachirakul et al.
DRYING TECHNOLOGY (2016)
Coupled DEM-CFD simulation of drying wood chips in a rotary drum - Baffle design and model reduction
Viktor Scherer et al.
FUEL (2016)
Multifluid Modeling of Coal Pyrolysis in a Downer Reactor
Zhan Shu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Convective Drying of Agitated Silica Gel and Beech Wood Particle BedsExperiments and Transient DEM-CFD Simulations
F. Sudbrock et al.
DRYING TECHNOLOGY (2015)
Direct numerical simulation of moderate-Reynolds-number flow past arrays of rotating spheres
Qiang Zhou et al.
PHYSICS OF FLUIDS (2015)
CFD study on solids flow pattern and solids mixing characteristics in bubbling fluidized bed: Effect of fluidization velocity and bed aspect ratio
Maryam Askarishahi et al.
POWDER TECHNOLOGY (2015)
Eulerian-Eulerian simulation of irregular particles in dense gas-solid fluidized beds
Leina Hua et al.
POWDER TECHNOLOGY (2015)
A drag model for filtered Euler-Lagrange simulations of clustered gas-particle suspensions
Stefan Radl et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Drying Efficiency of Indonesian Lignite in a Batch-Circulating Fluidized Bed Dryer
Jae Hyeok Park et al.
DRYING TECHNOLOGY (2014)
CFD simulation of a pharmaceutical bubbling bed drying process at three different scales
Jungkee Jang et al.
POWDER TECHNOLOGY (2014)
Immersed boundary methods for simulating fluid-structure interaction
Fotis Sotiropoulos et al.
PROGRESS IN AEROSPACE SCIENCES (2014)
Modeling Gas-Particle Two-Phase Flows with Complex and Moving Boundaries using DEM-CFD with an Immersed Boundary Method
Y. Guo et al.
AICHE JOURNAL (2013)
Numerical Simulation of a Spouted Bed Using Computational Fluid Dynamics (CFD)
C. H. Zhang et al.
DRYING TECHNOLOGY (2013)
Cartesian grid simulations of gas-solids flow systems with complex geometry
Jean-Francois Dietiker et al.
POWDER TECHNOLOGY (2013)
Membrane-assisted fluidized beds-part 1: Development of an Immersed Boundary Discrete Particle Model
J. F. de Jong et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for chemical looping combustion process: Air reactor modeling
Shuai Wang et al.
FUEL PROCESSING TECHNOLOGY (2012)
Computational investigation of hydrodynamics and cracking reaction in a heavy oil riser reactor
Jian Chang et al.
PARTICUOLOGY (2012)
Experimental and numerical analysis of soybean meal drying in fluidized bed
Fernanda Ribeiro Gaspar Branco da Silva et al.
POWDER TECHNOLOGY (2012)
Hydrodynamic simulation of fuel-reactor in chemical looping combustion process
Wang Shuai et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2011)
The Drying of Sludge in a Cyclone Dryer Using Computational Fluid Dynamics
Tarek J. Jamaleddine et al.
DRYING TECHNOLOGY (2011)
Development and testing of an interconnected multiphase CFD-model for chemical looping combustion
H. Kruggel-Emden et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Application of Computational Fluid Dynamics for Simulation of Drying Processes: A Review
Tarek J. Jamaleddine et al.
DRYING TECHNOLOGY (2010)
DISCRETE ELEMENT METHOD FOR MULTISCALE MODELING
J. Bruchmuller et al.
JOURNAL OF MULTISCALE MODELLING (2010)
Why the two-fluid model fails to predict the bed expansion characteristics of Geldart A particles in gas-fluidized beds: A tentative answer
Junwu Wang et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Investigation of batch fluidized-bed drying by mathematical modeling, CFD simulation and ECT measurement
H. G. Wang et al.
AICHE JOURNAL (2008)
Numerical Simulation of Dense Gas-Solid Fluidized Beds: A Multiscale Modeling Strategy
M.A. van der Hoef et al.
Annual Review of Fluid Mechanics (2008)
Multiphase CFD Modeling for a Chemical Looping Combustion Process (Fuel Reactor)
Zhongyi Deng et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2008)
Multiphase CFD-based models for chemical looping combustion process: Fuel reactor modeling
Jonghwun Jung et al.
POWDER TECHNOLOGY (2008)
Numerical simulation of fluid bed drying based on two-fluid model and experimental validation
M. R. Assari et al.
APPLIED THERMAL ENGINEERING (2007)
Simulation of the hydrodynamics and drying in a spouted bed dryer
Wu Zhonghua et al.
DRYING TECHNOLOGY (2007)
CFD Modeling of heat and mass transfer in a spouted bed dryer
RG Szafran et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)
A computational investigation of transient heat transfer in pneumatic transport of granular particles
J Li et al.
POWDER TECHNOLOGY (2000)
Share Paper
