☆ 4.6 Article

Three-dimensional numerical study on evaporating two-phase flow in heated micro T-junction

CHEMICAL ENGINEERING SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Review Engineering, Chemical

Two-phase flow and mass transfer in microchannels: A review from local mechanism to global models

Chaoqun Yao et al.

Summary: This review highlights the advantages of microreaction technology in process intensification and chemical synthesis, focusing on flow and mass transfer of two-phase systems in microchannels. By exploring aspects such as the formation and manipulation of bubbles/droplets, as well as velocity distribution and mixing within droplets/slugs, it provides valuable insights for understanding transport phenomena.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Thermodynamics

Lattice Boltzmann mesoscopic modeling of flow boiling heat transfer processes in a microchannel

Chuangde Zhang et al.

Summary: In this study, a MRT phase change lattice Boltzmann model was used to investigate flow boiling heat transfer processes in a vertical microchannel, and the heat transfer performance was enhanced by optimizing cavity microstructure. The simulation results show that increasing Reynolds number improves flow boiling heat transfer performance, advancing our understanding of bubble dynamics and heat transfer mechanisms in microchannel flow boiling processes.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Impact of flow feedback on bubble generation in T-junction microchannels under pressure-driven condition

Yan Pang et al.

Summary: Experimental study was conducted on bubble size in T-junction microchannels under pressure-driven conditions, showing that bubble length increases with flow rate and driving pressure. Different downstream channel types directly influence bubble size by affecting resistance, with a nonlinear relationship observed between them. Adjustment of flow rate at downstream provides feedback to bubble generation in the double T-junction channel.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Thermodynamics

Numerical simulation of evaporation phenomena and heat transfer of liquid Hydrocarbon in a microtube

Muhammad Tahir Rashid et al.

Summary: The study found that flow boiling of liquid n-heptane in a microtube under different flow rates and thermal gradients can affect heat transfer efficiency and pressure drop oscillation magnitude.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Review Thermodynamics

Review on high heat flux flow boiling of refrigerants and water for electronics cooling

Behnam Parizad Benam et al.

Summary: This article explores the heat removal challenges in high heat flux devices and the application of flow boiling for effective cooling. It discusses active and passive methods for improving flow boiling heat transfer, and summarizes studies on working fluids, channel sizes, and improvement methods in related literature.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Flow boiling in microchannels enhanced by parallel microgrooves fabricated on the bottom surfaces

Congcong Ren et al.

Summary: This study focuses on enhancing flow boiling performance in microchannels without using inlet restrictors, by fabricating parallel microgrooves on the bottom surface of the channels. The microgrooves effectively manage two-phase flow instabilities and enable high-frequency rewetting, enhancing heat transfer rates and delaying critical heat flux conditions. Through visualization studies, it was found that the microgrooves can significantly improve thin film evaporation and overall heat transfer coefficients in the microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Chemical

Geometric Effect on Gas-Liquid Bubbly Flow in Capillary-Embedded T-Junction Microchannels

Yuchao Chen et al.

Summary: This study investigated gas-liquid bubbly flows in T-junction microdevices with different microstructures and found that the gas injector diameter has a significant influence on bubble dispersion. When the gas injector diameter is small and the gas-phase flow rate is lower than the liquid-phase flow rate, bubbly microflows are easily formed. Furthermore, designing a step T-junction microchannel with a small capillary and a narrow slit can improve bubble generation ability.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Thermodynamics

Numerical Investigation on Bubble Growth and Merger in Microchannel Flow Boiling With Self-Rewetting Fluid

Wei Li et al.

Summary: This study investigates the heat transfer performance of self-rewetting fluid in microchannel flow boiling through numerical simulations. It is found that self-rewetting fluid can reduce the dryout area, increase the thin liquid film area, and enhance heat transfer efficiency in microchannels.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Thermodynamics

Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design

Lixin Cheng et al.

Summary: This paper provides a comprehensive overview of CO2 flow boiling heat transfer, flow patterns, and two-phase pressure drops in macro- and micro-channel evaporators. The effects of physical properties on heat transfer, flow patterns, and pressure drops are analyzed through experiments and simulations. New models and experimental databases specifically developed for CO2 are discussed, aiming to understand the physical mechanisms and predict the phenomena in evaporators.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Numerical investigations on flow boiling heat transfer of ammonia water binary solution (NH3/H2O) in a horizontal microchannel

Ren Yang et al.

Summary: The flow boiling heat transfer characteristics of NH3/H2O mixture in a microchannel were studied using CFD method. The results showed that there is an optimal inlet NH3 concentration for maintaining a certain level of heat dissipation rate, and increasing the inlet NH3 concentration beyond this threshold no longer benefits the heat dissipation process. Additionally, no local dry-outs were found in the microchannel length under all simulation conditions, suggesting that NH3/H2O mixture could be a good alternative coolant for electronic components.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

The effect of surface wettability on flow boiling characteristics within microchannels

Konstantinos Vontas et al.

Summary: This paper conducts an advanced numerical investigation on the effect of surface wettability characteristics on bubble growth within microchannels. The results demonstrate a significant impact of surface wettability on heat transfer coefficients, with hydrophilic and hydrophobic surfaces outperforming single-phase reference simulations by approximately 43.9% and 17.8% respectively.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Review Thermodynamics

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks

Daxiang Deng et al.

Summary: This paper comprehensively reviews recent advancements in flow boiling enhancement and fabrication of enhanced microchannels. It emphasizes the flow boiling enhancement performance of these enhanced microchannels in microchannel heat sinks, while also discussing their advantages and disadvantages after summarizing the classification and manufacturing methods of enhanced microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental investigation into unstable two phase flow phenomena during flow boiling in multi-microchannels

Yuanzheng Lv et al.

Summary: Experiments were conducted in two parallel rectangular multi-microchannels using HFE-7100 for flow boiling, revealing significant differences in heat flux and pressure drop under different aspect ratios, with the minimum heat flux decreasing as the aspect ratio decreases. The physical mechanisms of unstable vapor liquid two phase phenomena were analyzed based on a simplified mathematical model, suggesting that a wide flat regime in the hydrodynamic curves may decrease such phenomena.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

A numerical study of slug bubble growth during flow boiling in a diverging microchannel

Yuhao Lin et al.

Summary: The study investigates the growth of bubbles inside diverging and uniform microchannels, discussing the effects of mass flux, heat flux, and diverging gradient on bubble behavior and flow instability. The velocity is higher in diverging microchannel cases, leading to pressure drop oscillation caused by bubble growth.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2021)

Add to Collection

Article Engineering, Environmental

Formation of gas-liquid slugs in millimeter-scale T-junctions - Slug size estimation framework

Gwang-Noh Ahn et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Thermodynamics

3-D computational investigation and experimental validation of effect of shear-lift on two-phase flow and heat transfer characteristics of highly subcooled flow boiling in vertical upflow

Jeongmin Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Aerospace

Numerical and Experimental Study of the Squeezing-to-Dripping Transition in a T-Junction

S. Arias et al.

MICROGRAVITY SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Aerospace

Comparison of Two Gas Injection Methods for Generating Bubbles in a T-junction

S. Arias

MICROGRAVITY SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

Flow boiling enhancement by bubble mobility on heterogeneous wetting surface in microchannel

Jonghyun Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Mesoscale simulations of saturated flow boiling heat transfer in a horizontal microchannel

Haoyuan Wang et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2020)

Add to Collection

Article Thermodynamics

Experimental and Numerical Investigation of Micro/Mini Channel Flow-Boiling Heat Transfer with Non-Uniform Circumferential Heat Fluxes at Different Rotational Orientations

M. Vermaak et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

3D Transient heat transfer analysis and flow visualization study in diverging microchannel for instability mitigated two-phase flow: A numerical study

Uday Kumar Alugoju et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Chemical

Numerical simulation of sliding bubbles in saturated flow boiling

Pramod Bhuvankar et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Physics, Fluids & Plasmas

Breakup of elongated droplets in microfluidic T-junctions

Cees Haringa et al.

PHYSICAL REVIEW FLUIDS (2019)

Add to Collection

Article Engineering, Chemical

Enhancement effect and mechanism of gas-liquid mass transfer by baffles embedded in the microchannel

Yaran Yin et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Review Engineering, Chemical

Gas-liquid-liquid multiphase flow in microfluidic systems

Zhuo Chen et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Thermodynamics

Numerical simulation of liquid film formation and its heat transfer through vapor bubble expansion in a microchannel

Junnosuke Okajima et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Mechanics

Flow boiling heat transfer in silicon microgaps with multiple hotspots and variable pin fin clustering

Daniel Lorenzini et al.

PHYSICS OF FLUIDS (2019)

Add to Collection

Article Engineering, Environmental

Characteristics of gas-liquid Taylor flow with different liquid viscosities in a rectangular microchannel

Chaoqun Yao et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Chemical

Dynamics and interfacial evolution for bubble breakup in shear-thinning non-Newtonian fluid in microfluidic T-junction

Hao Zhou et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

Experimental characterization of gas-liquid flows in splitting distributor for parallel micro-channels

Appurva Tiwari et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Environmental

The phase distribution of gas-liquid two-phase flow in microimpacting T-junctions with different branch channel diameters

Wanchun Sun et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Thermodynamics

Numerical analysis of slug flow boiling in square microchannels

Andrea Ferrari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Visualization of flow patterns and bubble behavior during flow boiling in open microchannels

Liaofei Yin et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

An experimental method for controlled generation and characterization of microchannel slug flow boiling

Todd A. Kingston et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Transient split features of slug flow at an impacting micro-T-junction: A numerical study

Kui He et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Engineering, Aerospace

Numerical Study and Experimental Comparison of Two-Phase Flow Generation in a T-Junction

S. Arias et al.

AIAA JOURNAL (2017)

Add to Collection

Article Thermodynamics

A saturated-interface-volume phase change model for simulating flow boiling

Zhenhai Pan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Multidisciplinary Sciences

Bubble breakup in a microfluidic T-junction

Xiangdong Liu et al.

SCIENCE BULLETIN (2016)

Add to Collection

Article Engineering, Chemical

Experiments and modeling on bubble uniformity of Taylor flow in T-junction microchannel

Dongyue Peng et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

Split of two-phase plug flow with elongated bubbles at a microscale branching T-junction

Seok Kim et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Add to Collection

Article Thermodynamics

Three dimensional numerical simulation on bubble growth and merger in microchannel boiling flow

Kong Ling et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

Add to Collection

Article Thermodynamics

Spurious Current Suppression in VOF-CSF Simulation of Slug Flow through Small Channels

Zhenhai Pan et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Numerical study of seed bubble-triggered evaporation heat transfer in a single microtube

Luxiang Zong et al.

MICROFLUIDICS AND NANOFLUIDICS (2014)

Add to Collection

Article Engineering, Chemical

Three-dimensional numerical study on droplet formation and cell encapsulation process in a micro T-junction

Hui Yang et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Add to Collection

Article Thermodynamics

Numerical investigation of hydrodynamics and heat transfer of elongated bubbles during flow boiling in a microchannel

M. Magnini et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Mechanics

Effects of T-junction size on bubble generation and flow instability for two-phase flows in circular microchannels

Ken Yamamoto et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2013)

Add to Collection

Article Thermodynamics

Numerical investigation of the influence of leading and sequential bubbles on slug flow boiling within a microchannel

M. Magnini et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)

Add to Collection

Article Physics, Multidisciplinary

Obstructed Breakup of Slender Drops in a Microfluidic T Junction

A. M. Leshansky et al.

PHYSICAL REVIEW LETTERS (2012)

Add to Collection

Article Engineering, Chemical

Dynamics of bubble breakup in a microfluidic T-junction divergence

Taotao Fu et al.

CHEMICAL ENGINEERING SCIENCE (2011)

Add to Collection

Article Thermodynamics

Numerical study of bubble growth and wall heat transfer during flow boiling in a microchannel

A. Mukherjee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.