Single-Crystalline Ni-Rich layered cathodes with Super-Stable cycling

Further commercial development of polycrystalline Ni-rich layered cathode is severely hindered by the deep-rooted particle microcracking, mainly initiated among the randomly orientated grain boundaries of the primary particles. Herein, robust single-crystalline Ni-rich LiNi0.83Co0.11Mn0.06O2 (SC83) prepared by molten salt-assisted method shows the enhanced structure stability and cycling durability. It's found that the particle microcracking is effectively removed for SC83 cathode during prolonged cycling helped with its eliminated grain boundaries and slight crystal shrinkage, leading to superior capacity retention of 92.8% after 100 cycles. Notably, the discharge capacity and energy density are effectively boosted with increasing Ni fraction majorly based on the more available Ni2+/Ni3+ redox, giving rise to high capacities of 211.2 and 219.4 mAh g(-1) for LiNi0.88Co0.06Mn0.06O2 (SC88) and LiNi0.95Co0.03Mn0.02O2 (SC95) cathodes, respectively. However, the particle microcracking is progressively exacerbated owing to the aggravated Li/Ni mixing and H2 & LRARR; H3 phase transition with Ni proportion higher than or equal to 88% in SC cathodes, resulting in severe structure collapse and ca-pacity fading during high-rate cycling, in which a poor capacity retention of 51.8% after 250 cycles at 5C is observed for single-crystalline SC95cathode. This work sheds light on the rational design of single-crystalline Ni-rich cathodes, and highlighted the trade-off between the energy density and cycling durability, facilitating the extensive applications of single-crystalline Ni-rich cathodes in high-performance electric vehicles (EVs).

Automated summary

This study successfully improved the structure stability and cycling durability of single-crystalline Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode prepared by molten salt-assisted method, which showed superior capacity retention after 100 cycles. Moreover, increasing Ni fraction can effectively enhance the discharge capacity and energy density, but may lead to aggravated particle microcracking when Ni proportion is higher than 88%, affecting cycling performance.