4.7 Article

Co9S8/NiCo2S4 core-shell array structure cathode hybridized with PPy/MnO2 core-shell structure anode for high-performance flexible quasi-solid-state alkaline aqueous batteries

Related references

Note: Only part of the references are listed.
Review Chemistry, Applied

Multivalent metal-sulfur batteries for green and cost-effective energy storage: Current status and challenges

Yue Yang et al.

Summary: Multivalent metal-sulfur batteries have the potential for high specific capacity and cost-effectiveness, but face challenges such as slow diffusion of metal ions and shuttle of polysulfides. Optimizing electrochemical performance and understanding the unique electrochemical reaction mechanism are essential for the development of these batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Engineering, Environmental

WN0.67-Embedded N-doped Graphene-Nanosheet Interlayer as efficient polysulfide catalyst and absorbant for High-Performance Lithium-Sulfur batteries

Fei Ma et al.

Summary: By constructing a WN0.67@NG interlayer, the cycling stability and capacity degradation issues of lithium-sulfur batteries have been optimized, resulting in outstanding electrochemical performances.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Ultrathin holey reduced graphene oxide/Ni(picolinic acid)2 papers for flexible battery-supercapacitor hybrid devices

Chao Yang et al.

Summary: Metal-organic frameworks are widely used as electrode materials for electrochemical energy storage due to their porous skeleton, but often suffer from poor conductivity and low packing density, limiting their rate capability and volumetric capacitance. A flexible battery-supercapacitor hybrid device has been developed based on holey reduced graphene oxide (HRGO) anode and HRGO/Ni(picolinic acid)(2) cathode, showing promising performance for high-volumetric flexible energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Tailoring the composition and structure of Ni3S2 by introduction of Co towards high efficiency energy storage device

Peng Zhou et al.

Summary: In this study, a hierarchical Co modified Ni3S2 electrode was synthesized via a simple sulfuration reaction from NiCo-LDH, showing superior electrochemical performances. Compared to NiCo-LDH precursor and monometallic Ni3S2 electrode, the developed electrode exhibited much higher specific capacitance and great rate capability. Moreover, the assembled energy storage device with the Co-Ni3S2 electrode and activated carbon electrode demonstrated high energy density, power density, and outstanding electrochemical stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Porous Co-MoS2@Cu2MoS4 three-dimensional nanoflowers via in situ sulfurization of Cu2O nanospheres for electrochemical hybrid capacitors

Sk. Khaja Hussain et al.

Summary: Novel transition metal dichalcogenide materials with three-dimensional porous nanostructures exhibit outstanding electrochemical performance. By synthesizing hierarchical nanoflowers and introducing Co nanoparticles, higher specific surface area and improved cycling stability were achieved, leading to better electrochemical results. A pouch-type electrochemical hybrid capacitor device constructed in the study demonstrated high energy and power density values, along with superior cycling stability, showcasing its practical utility in energy storage for portable electronics.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Rational design of bimetallic metal - organic framework composites and their derived sulfides with superior electrochemical performance to remarkably boost oxygen evolution and supercapacitors

Dengke Xiong et al.

Summary: The study successfully designed and fabricated a series of bimetallic metal-organic framework hybrid materials with remarkable electrochemical performance, among which the FeMOF/NiMOF/NF composite exhibited the best oxygen evolution reaction performance and exceptional electrochemical stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Electrochemistry

A dual NiCo metal-organic frameworks derived NiCo2S4 core-shell nanorod arrays as high-performance electrodes for asymmetric supercapacitors

Jiaxu Gong et al.

Summary: This study demonstrates the preparation of NiCo2S4 with core-shell and micro-porous structure as an efficient anode material for asymmetric supercapacitors, showing remarkable specific capacitance and cycling stability. The core-shell structure effectively suppresses volume expansion during sulfurization reaction, suggesting potential applications in electrochemical energy storage and conversion devices.

ELECTROCHIMICA ACTA (2021)

Article Materials Science, Multidisciplinary

Design and fabrication of high performance flexible supercapacitor with polypyrrole@carbon fiber yarn electrode and redox active dopants

Xin Liu et al.

Summary: The study found that the PPy@CFY electrodes doped with sodium lignosulfonate exhibited high specific capacitance, and the AFFSC capacitor based on these electrodes showed excellent cyclic stability and mechanical stability, with potential for practical applications.

SYNTHETIC METALS (2021)

Article Energy & Fuels

Self-assembled polypyrrole hierarchical porous networks as the cathode and porous three dimensional carbonaceous networks as the anode materials for asymmetric supercapacitor

Arjun Prasad Tiwari et al.

Summary: The study reported the significance of phytic acid-mediated polypyrrole networks in energy storage applications, showcasing the self-assembly of porous electrode materials through hydrogen bonding and electrostatic interactions, resulting in enhanced capacitance, with phytic acid playing a key role in electrode material design.

JOURNAL OF ENERGY STORAGE (2021)

Article Engineering, Environmental

Hierarchical core-shell Ag@Ni(OH)2@PPy nanowire electrode for ultrahigh energy density asymmetric supercapacitor

Yongyun Mao et al.

Summary: The designed coaxial hierarchical AgNW@Ni(OH)(2)@PPy electrode shows excellent specific capacitance and cyclic stability, leading to an all-solid-state asymmetric supercapacitor with ultrahigh energy density. The outstanding performance is attributed to the coaxial hierarchical design with innermost and outermost dual-electric channels.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Core cation tuned MxCo3-xS4@NiMoS4 [M = Ni, Mn, zn] core-shell nanomaterials as advanced all solid-state asymmetric supercapacitor electrodes

Khem Raj Shrestha et al.

Summary: The research demonstrates an effective strategy to tune core cations in the core@shell design, resulting in better electrochemical storage properties and cycle life in the electrodes. The NiCo2S4@NiMoS4 core@shell showed excellent performance with high capacity retention after cycles, indicating great potential for practical energy storage devices.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Electrochemistry

Enhancing performance of NiCo2S4/Ni3S2 supercapacitor electrode by Mn doping

Praphaiphon Phonsuksawang et al.

Summary: This study investigates the effects of Mn doping on electrochemical performances of NiCo2S4/Ni3S2 electrodes, demonstrating that doping metallic ions into the NiCo2S4 lattice is an effective strategy to enhance the electrochemical performance of the material. The doped electrode shows improved capacity by up to 160%, with preserved nanosheet feature, good cycle stability, and rate capability.

ELECTROCHIMICA ACTA (2021)

Article Electrochemistry

A free-standing Ni-Mn-S@NiCo2S4 core-shell heterostructure on carbon cloth for high-energy flexible supercapacitors

Liu Wan et al.

Summary: The free-standing Ni-Mn-S@NiCo2S4 core-shell heterostructure synthesized on flexible carbon cloth shows excellent electrochemical performance, high specific capacity, outstanding rate capability, and long cycle life. The fabricated Ni-Mn-S@NiCo2S4//porous carbon hybrid supercapacitor device delivers a high energy density and demonstrates promising potential in high-performance hybrid supercapacitors.

ELECTROCHIMICA ACTA (2021)

Article Electrochemistry

Integrating amorphous vanadium oxide into carbon nanofibers via electrospinning as high-performance anodes for alkaline ion (Li+/Na+/K+) batteries

Ting Liu et al.

Summary: A hybrid material of amorphous vanadium oxide uniformly embedded into highly defective carbon nanofibers (VOx@CNFs) was fabricated and demonstrated excellent alkaline ion storage performances. It provides abundant active sites for ion storage, multiple channels for ion diffusion, and can accommodate structural changes effectively.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Interface-modulated uniform outer nanolayer: A category of electrodes of nanolayer-encapsulated core-shell configuration for supercapacitors

T. Kavinkumar et al.

Summary: A core-shell electrode structure with an outer nanolayer enhances capacity and cyclic stability, with the thin nanolayer providing flexibility to maintain physical integrity and reduce capacity loss during cycling. This design shows potential for supercapacitors to rival lithium ion batteries in energy density while maintaining high power density.

NANO ENERGY (2021)

Review Chemistry, Physical

Guest-species-incorporation in manganese/vanadium-based oxides: Towards high performance aqueous zinc-ion batteries

Yan Li et al.

Summary: Recent research progress has been made in the guest species incorporation of manganese/vanadium oxides for AZIBs, improving structural stability and enhancing capacity and cycling stability. This review analyzes crystal structures and zinc storage mechanisms, while summarizing design strategies, structural advantages, and future prospects.

NANO ENERGY (2021)

Article Chemistry, Physical

High-performance hybrid supercapacitors based on MOF-derived hollow ternary chalcogenides

Goli Nagaraju et al.

Summary: The study presents a novel electrode design of hierarchical Cu(Co-Ni)(2)S-4 nanotubes on nickel foam using synchronous etching and multi-ion doping. The electrode demonstrates excellent battery-type redox kinetics and cycling stability, achieving outstanding energy storage performance. By combining battery-type Cu(Co-Ni)(2)S-4 nanotubes/nickel foam with porous carbon as capacitive-type electrode, a high-performance hybrid supercapacitor (HSC) device with high energy efficiency and cyclic stability is assembled.

ENERGY STORAGE MATERIALS (2021)

Review Chemistry, Physical

A review of thermal physics and management inside lithium-ion batteries for high energy density and fast charging

Yuqiang Zeng et al.

Summary: As lithium-ion battery (LIB) research shifts towards high energy density and fast charging batteries, traditional assumptions about battery thermal management around room temperature may not hold true. A comprehensive review of thermal considerations for LIBs targeting high energy density and fast charging is necessary, including optimal thermal conditions, heat transport and generation inside the battery, and thermal management strategies. To maintain temperature uniformity and prevent excessive internal temperature rise, enhancing heat transfer inside the battery and reducing thermal contact resistance between electrodes can significantly improve the effective thermal conductivity of batteries.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

When Conductive MOFs Meet MnO2: High Electrochemical Energy Storage Performance in an Aqueous Asymmetric Supercapacitor

Huiyu Duan et al.

Summary: Metal organic frameworks (MOFs) with good electrical conductivity, such as conductive MOFs (c-MOFs), exhibit promising electrochemical performance, especially when combined with transition-metal oxides (TMOs) to improve capacitance and rate performance. The assembly of MnO2@Ni-HHTP nanoarrays as positive electrode material in an aqueous asymmetric supercapacitor shows high energy density, outstanding rate performance, and superior cycle stability, indicating a potential class of electrode materials for energy storage and conversion.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

A Ni-Co sulfide nanosheet/carbon nanotube hybrid film for highenergy and high-power flexible supercapacitors

Pengyi Lu et al.

Summary: The CNT@NiCo2S4 hybrid film exhibits high mechanical flexibility, excellent electrochemical properties, and lightweight, suitable for flexible supercapacitors. The asymmetric flexible supercapacitor based on this material shows high voltage output, high energy/power density, outstanding cycling stability, and excellent mechanical flexibility without sacrificing performance.

CARBON (2021)

Article Engineering, Environmental

Construction of triple-shelled hollow nanostructure by confining amorphous Ni-Co-S/crystalline MnS on/in hollow carbon nanospheres for all-solid-state hybrid supercapacitors

Yan Zhou et al.

Summary: Designing novel electrode materials with controlled structure and composition is challenging, but a triple-shelled hollow nanostructure has been successfully designed here, showing improved electrochemical activity, fast electronic/ion transport, mechanical stability, and enhanced charge storage. This electrode material delivers high specific capacity and outstanding cyclic stability, leading to a long cycle life and high energy density in all-solid-state hybrid supercapacitors.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Electrochemistry

Hybrid electrolyte-mediated nano-scaled γ-Fe2O3 cathode for emerging aqueous zinc battery

Jingying Duan et al.

Summary: The study demonstrated the use of low-cost, non-toxic, environmentally friendly nano-scaled gamma-Fe2O3 as an effective cathode material for aqueous zinc batteries. It was also found that the addition of highly concentrated magnesium ions can improve the battery's performance.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Facile synthesis of CO/N-doped carbon nanotubes and the application in alkaline and neutral metal-air batteries

Qin Liao et al.

Summary: Nonprecious transition metals and nitrogen doped carbon materials are considered as attractive alternatives to precious metal catalysts. Cobalt decorated nitrogen-doped carbon nanotubes show promising performance in metal-air batteries, outperforming commercial Pt/C. This demonstrates the potential of Co-NCNT as a candidate for ORR in metal-air batteries.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Towards high-performance all-solid-state asymmetric supercapacitors: A hierarchical doughnut-like Ni3S2@PPy core-shell heterostructure on nickel foam electrode and density functional theory calculations

Jun Ren et al.

Summary: A hierarchical doughnut-like Ni3S2@polypyrrole (PPy) core-shell heterostructure has been successfully constructed on nickel foam (NF), exhibiting excellent electrochemical performance and high energy density. Density functional theory calculations reveal the formation of N-Ni and C-Ni bonds at the PPy/Ni3S2 heterostructure interface, contributing to the enhanced overall properties.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Bilayered NiZn(CO3)(OH)2-Ni2(CO3)(OH)2 nanocomposites as positive electrode for supercapacitors

Damin Lee et al.

Summary: By fabricating open architecture and porous NiZn(CO3)(OH)2-Ni-2(CO3)(OH)2 bilayers on a nickel foam substrate, higher mechanical stability and enhanced electrochemical performance were achieved, with excellent specific capacitance and cycling stability observed. The asymmetric two-layered NiZn(CO3)(OH)2-Ni-2(CO3)(OH)2//graphene electrodes provided enough capacitive energy to illuminate a LED light, making them promising candidates for practical applications due to their hierarchical architecture and large surface area.

NANO ENERGY (2021)

Article Energy & Fuels

A high-energy-density and long-life initial-anode-free lithium battery enabled by a Li2O sacrificial agent

Yu Qiao et al.

Summary: Anode-free batteries are promising for high-energy applications, but face challenges with cycling stability due to limited lithium sources. In this study, researchers preloaded Li2O onto the cathode of an initial-anode-free cell to provide additional lithium for offsetting irreversible lithium loss during long-term cycling. By utilizing O-2(-) species released through Li2O oxidation and a fluorinated ether additive, a LiF-based layer was constructed at the cathode/electrolyte interface to passivate the cathode surface and inhibit the detrimental oxidative decomposition of ether solvents. As a result, a long-life 2.46 Ah initial-anode-free pouch cell with a gravimetric energy density of 320 Wh kg(-1) was achieved, maintaining 80% capacity after 300 cycles.

NATURE ENERGY (2021)

Article Chemistry, Physical

Rational fabrication of nanosheet-dewy NiMoO4/Ni3S2 nanohybrid for efficient hybrid supercapacitor

Lishu Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Multidisciplinary Sciences

Raman and XPS studies of ammonia sensitive polypyrrole nanorods and nanoparticles

Milena Setka et al.

SCIENTIFIC REPORTS (2019)

Article Chemistry, Physical

Ni,Zn-codoped MgCo2O4 electrodes for aqueous asymmetric supercapacitor and rechargeable Zn battery

Zhaoqiang Zhu et al.

JOURNAL OF POWER SOURCES (2019)

Article Chemistry, Multidisciplinary

High-Energy Asymmetric Supercapacitor Yarns for Self-Charging Power Textiles

Mengmeng Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Microporous Polypyrrole-Coated Graphene Foam for High-Performance Multifunctional Sensors and Flexible Supercapacitors

Heun Park et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Highly Durable Na2V6O16•1.63H2O Nanowire Cathode for Aqueous Zinc-Ion Battery

Ping Hu et al.

NANO LETTERS (2018)

Article Chemistry, Physical

Novel core/shell CoSe2@PPy nanoflowers for high-performance fiber asymmetric supercapacitors

Qiufan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Supercapacitor with superior electrochemical properties derived from symmetrical manganese oxide-carbon fiber coated with polypyrrole

Muhammad Amirul Aizat Mohd Abdah et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Nanoscience & Nanotechnology

Hierarchically Designed Ag@Ce6Mo10O39 Marigold Flower-Like Architectures: An Efficient Electrode Material for Hybrid Supercapacitors

S. Chandra Sekhar et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Multidisciplinary

Synthesis of NiCo2S4-based nanostructured electrodes supported on nickel foams with superior electrochemical performance

Tao Zhu et al.

JOURNAL OF MATERIALS SCIENCE (2016)

Article Nanoscience & Nanotechnology

Aqueous Rechargeable Zinc/Aluminum Ion Battery with Good Cycling Performance

Faxing Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Review Multidisciplinary Sciences

Photovoltaic materials: Present efficiencies and future challenges

Albert Polman et al.

SCIENCE (2016)

Article Chemistry, Physical

Commercial Dacron cloth supported Cu(OH)(2) nanobelt arrays for wearable supercapacitors

Shuijin Lei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Effect of pH on morphology and supercapacitive properties of manganese oxide/polypyrrole nanocomposite

John Kevin Gan et al.

APPLIED SURFACE SCIENCE (2015)

Article Multidisciplinary Sciences

Water-in-salt electrolyte enables high-voltage aqueous lithium-ion chemistries

Liumin Suo et al.

SCIENCE (2015)

Article Chemistry, Physical

Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors

Torsten Brezesinski et al.

NATURE MATERIALS (2010)