☆ 4.7 Article

Microstructure and properties of the AlCrMoZrTi/(AlCrMoZrTi)N multilayer high-entropy nitride ceramics films deposited by reactive RF sputtering

CERAMICS INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Effect of bias voltages on microstructure and properties of (TiVCrNbSiTaBY)N high entropy alloy nitride coatings deposited by RF magnetron sputtering

Xiangyu Zhang et al.

Summary: (TiVCrNbSiTaBY)N high entropy alloy nitride coatings deposited by radio frequency magnetron sputtering onto silicon and cemented carbide substrates exhibit excellent mechanical and tribological performance, influenced significantly by bias voltages on microstructure, morphology, and mechanical properties, resulting in smoother surface morphology at high bias voltage.

VACUUM (2022)

Add to Collection

Article Materials Science, Ceramics

The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating

Hairui Ma et al.

Summary: Nitride coatings have been widely used on light alloys like titanium and aluminum to enhance their hardness, thermal stability, and wear resistance. In this study, TiAlSiN/TiN multilayered coating and TiAlSiN single-layer coating were applied on TC18 alloy, with the multilayered coating showing better adhesion, hardness, and wear resistance properties compared to the single-layer coating.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Mechanical and high-temperature tribological properties of CrAlN/TiSiN multilayer coating deposited by PVD

Chunling Li et al.

Summary: The study found that the CrAlN/TiSiN multilayer coating has superior mechanical properties, wear resistance, and high-temperature oxidation resistance. It has a denser structure and can maintain a stable coefficient of friction as well as excellent wear resistance during high temperature friction.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Characterization & Testing

A novel design of VAlTiCrCu/WC alternate multilayer structure to enhance the mechanical and tribo-corrosion properties of the high-entropy alloy coating

Zhaoxia Lu et al.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Coatings & Films

Effect of c-BN on the microstructure and high temperature wear resistance of laser cladded Ni-based composite coating

Yue Zhao et al.

Summary: In this study, composite coatings of Ni60 + Cu/h-BN + MoO3 and Ni60 + Cu/c-BN + MoO3 were fabricated by laser cladding, with the addition of c-BN improving microstructure, high temperature hardness, and wear resistance properties. The c-BN decomposition during the process led to the formation of reinforcements, increasing coating hardness and reducing wear rate at various temperatures. The transition of remaining c-BN particles into h-BN and the lubricating property provided by h-BN also contributed to the enhanced performance of the coatings.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Coatings & Films

High-temperature wear behavior of micro- and ultrananocrystalline diamond films against titanium alloy

Qiang Lin et al.

Summary: The study revealed that the wear of diamond films at low temperatures is mainly induced by the strong adhesion between diamond and titanium, while at high temperatures, oxygen significantly etches the diamond films, causing loss of carbon atoms and increased wear.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of SiC thickness on microstructure and mechanical properties of (AlCrTiZrV)N/SiC nano-multilayers film synthesized by reactive magnetron sputtering

Bohan Li et al.

Summary: The thickness of the SiC layer significantly affects the performance of (AlCrTiZrV)N/SiC nano-multilayers film, with an appropriate SiC thickness leading to increased hardness and modulus of elasticity.

THIN SOLID FILMS (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructures and properties of (TiCrZrVAl)N high entropy ceramics films by multi-arc ion plating

Wenju Xu et al.

Summary: High entropy ceramics films were deposited on Inconel 718 alloys using multi-arc ion plating equipment with different nitrogen flow ratios, affecting the microstructure, mechanical properties, and tribological properties of the films. The films exhibited varying structures and characteristics depending on the nitrogen flow ratio, with higher ratios resulting in improved wear resistance and lower wear rates.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

The effect of microstructure on corrosion behavior of a novel AlCrTiSiN ceramic coating

Wanglin Chen et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of AlCrN/TiSiN nanomultilayer coatings consisting of fcc single-phase solid solution

Wanglin Chen et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

Influence of CrN, TiAlN monolayers and TiAlN/CrN multilayer ceramic films on structural, mechanical and tribological behavior of β-type Ti45Nb alloys

Onur Comakli

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Effects of modulation periods on mechanical properties of V/VN nano-multilayers

Tao Fu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

Interface stability, mechanical and corrosion properties of AlCrMoNbZr/ (AlCrMoNbZr)N high-entropy alloy multilayer coatings under helium ion irradiation

W. Zhang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Multidisciplinary

A new type of (TiZrNbTaHf)N/MoN nanocomposite coating: Microstructure and properties depending on energy of incident ions

A. A. Bagdasaryan et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and mechanical characterization of (TiZrNbHfTa)N/WN multilayered nitride coatings

A. A. Bagdasaryan et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation, structure, and properties of high-entropy alloy multilayer coatings for nuclear fuel cladding: A case study of AlCrMoNbZr/(AlCrMoNbZr)N

W. Zhang et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure, mechanical and tribological properties of TiN/Mo2N nano-multilayer films deposited by magnetron sputtering

Guojun Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Add to Collection

Article Chemistry, Physical

Effects of silicon content on the structure and properties of (AlCrMoTaTi)N coatings by reactive magnetron sputtering

Du-Cheng Tsai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Coatings & Films

Interfacial reactions and characterization of (TiVCrZrHf)N thin films during thermal treatment

Du-Cheng Tsai et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

Structural morphology and characterization of (AlCrMoTaTi)N coating deposited via magnetron sputtering

Du-Cheng Tsai et al.

APPLIED SURFACE SCIENCE (2013)

Add to Collection

Article Materials Science, Coatings & Films

Structure and properties of two Al-Cr-Nb-Si-Ti high-entropy nitride coatings

Ming-Hsiao Hsieh et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Coatings & Films

Structure and properties of (AlCrMoNiTi)Nx and (AlCrMoZrTi)Nx films by reactive RF sputtering

B. Ren et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Chemistry, Physical

4-nm thick multilayer structure of multi-component (AlCrRuTaTiZr)Nx as robust diffusion barrier for Cu interconnects

Shou-Yi Chang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Add to Collection

Article Chemistry, Physical

Ti/TiN multilayer thin films deposited by pulse biased arc ion plating

Yanhui Zhao et al.

APPLIED SURFACE SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering

Keng-Hao Cheng et al.

THIN SOLID FILMS (2011)

Add to Collection

Article Materials Science, Coatings & Films

Effects of nitrogen content on structure and mechanical properties of multi-element (AlCrNbSiTiV)N coating

Ping-Kang Huang et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Coatings & Films

Influence of substrate temperature on structure and mechanical, properties of multi-element (AlCrTaTiZr)N coatings

Chia-Han Lai et al.

SURFACE & COATINGS TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Coatings & Films

Biaxially aligned titanium nitride thin films deposited by reactive unbalanced magnetron sputtering

S Mahieu et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Coatings & Films

Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering

TK Chen et al.

SURFACE & COATINGS TECHNOLOGY (2004)

Add to Collection

Article Engineering, Mechanical

On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour

A Leyland et al.

WEAR (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.