4.7 Article

Study on the sintering mechanism and properties of porous ceramics prepared by silicon carbide abrasive particles with multi-mineral sintering additives and silica sols

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Low-temperature sintering of silicon carbide membrane supports from disks to single- and 19-channel tubes

Jian Zhou et al.

Summary: A low temperature sintering process was used to prepare porous SiC membrane supports, which showed improved performance compared to disk-like supports. This research provides important guidance for the development of new generation ceramic membranes.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Article Materials Science, Ceramics

One step co-sintering of silicon carbide ceramic membrane with the aid of boron carbide

Shuang Li et al.

Summary: The fabrication route for silicon carbide membrane using boron carbide assistance in co-sintering process results in a reduction of sintering cycles and shorter preparation periods, as well as the formation of a straight and homogeneous selective layer on the substrate.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Nanoscience & Nanotechnology

Overcoming the Trade-off between Water Permeation and Mechanical Strength of Ceramic Membrane Supports by Interfacial Engineering

Qilin Gu et al.

Summary: By compositing kaolin nanoflakes with coarse alumina particles, multichannel flat-sheet ceramic supports were successfully fabricated, showing high water permeability and mechanical strength.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Ceramics

Effects of SDBS and ZrO2 additives on the microstructure and properties of silicon-bonded SiC porous ceramics

Tianlong Liu et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Facile preparation of morph-genetic SiC/C porous ceramic at low temperature by processed bio-template

Hexing Liu et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Pressure-less joining of SiCf/SiC composites by Y2O3-Al2O3-SiO2 glass: Microstructure and properties

Le Wang et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Influence of template strut morphology on the mechanical performance of SiC reticulated porous ceramics

Xiong Liang et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Preparation of porous SiC-ceramics by sol-gel and spark plasma sintering

Elizaveta P. Simonenko et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2017)

Article Materials Science, Ceramics

Low-temperature sintering of porous silicon carbide ceramic support with SDBS as sintering aid

Yi Yang et al.

CERAMICS INTERNATIONAL (2017)

Article Materials Science, Multidisciplinary

High temperature compression properties of open-cell Ni-20Cr foams produced by impregnation

Lijun Xiao et al.

MATERIALS & DESIGN (2015)

Article Engineering, Chemical

Preparation and Characterization of SiC Whisker-Reinforced SiC Porous Ceramics for Hot Gas Filtration

Feng Han et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Article Materials Science, Multidisciplinary

Preparation and properties of mullite-bonded porous SiC ceramics using porous alumina as oxide

Bai Cheng-ying et al.

MATERIALS CHARACTERIZATION (2014)

Review Materials Science, Ceramics

Processing and properties of macroporous silicon carbide ceramics: A review

Jung-Hye Eom et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2013)

Review Materials Science, Multidisciplinary

Macro-porous ceramics: processing and properties

T. Ohji et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

Article Materials Science, Ceramics

Microstructural comparison of porous oxide ceramics from the system Al2O3-ZrO2 prepared with starch as a pore-forming agent

Zuzana Zivcova-Vlckova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Materials Science, Multidisciplinary

Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent

Jianguang Bai et al.

MATERIALS LETTERS (2012)

Article Materials Science, Ceramics

Fabrication and characterization of composite sol-gel coatings on porous ceramic substrate

M. Touzin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)

Editorial Material Mechanics

Fracture strength distribution of porous ceramics under quasi-static load

Shinya Matsuda et al.

ENGINEERING FRACTURE MECHANICS (2010)

Article Materials Science, Multidisciplinary

Thermodynamic Study on Codeposition of ZrC-SiC from MTS-ZrCl4-CH4-H2

Q. M. Liu et al.

INORGANIC MATERIALS (2010)

Article Physics, Applied

Synthesis and properties of porous SiC ceramics

V. S. Kiselov et al.

JOURNAL OF APPLIED PHYSICS (2010)

Article Materials Science, Ceramics

Fabrication and characterization of cordierite-bonded porous SiC ceramics

Shifeng Liu et al.

CERAMICS INTERNATIONAL (2009)

Article Physics, Fluids & Plasmas

Pulsed electrical discharge in water generated using porous-ceramic-coated electrodes

Petr Lukes et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2008)

Article Materials Science, Ceramics

Microstructural characterization of porous silicon carbide membrane support with and without alumina additive

M Fukushima et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Materials Science, Ceramics

Effect of recoating slurry viscosity on the properties of reticulated porous silicon carbide ceramics

XM Yao et al.

CERAMICS INTERNATIONAL (2006)

Article Materials Science, Ceramics

Effect of Y2O3 addition on the properties of reaction-bonded porous SiC ceramics

SQ Ding et al.

CERAMICS INTERNATIONAL (2006)

Article Materials Science, Multidisciplinary

Ceramic foams from preceramic polymers

P Colombo et al.

MATERIALS RESEARCH INNOVATIONS (2002)

Article Chemistry, Applied

Porosity and strength of silicon carbide foams prepared using preceramic polymers

MR Nangrejo et al.

JOURNAL OF POROUS MATERIALS (2002)

Article Nanoscience & Nanotechnology

Preparation of silicon carbide reticulated porous ceramics

XW Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Article Engineering, Chemical

Porous ceramic membranes for catalytic reactors - overview and new ideas

A Julbe et al.

JOURNAL OF MEMBRANE SCIENCE (2001)