Related references
Note: Only part of the references are listed.Improved structural, mechanical, corrosion and tribocorrosion properties of Ti45Nb alloys by TiN, TiAlN monolayers, and TiAlN/TiN multilayer ceramic films
Onur Comakli
CERAMICS INTERNATIONAL (2021)
Fretting wear and mechanical properties of surface-nanostructural titanium alloy bone plate
Gaoqi Wang et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Influence of a hard transition layer on the microstructure and properties of diamond-like carbon/hydroxyapatite composite coating prepared by magnetron sputtering
Jianwei Qi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Fe2Ti interlayer for improved adhesion strength and corrosion resistance of TiN coating on stainless steel 316L
Miao Song et al.
APPLIED SURFACE SCIENCE (2020)
Design and fabrication of HfC, SiC/HfC and HfC-SiC/HfC interlayers for improving the adhesion between diamond coatings and cemented carbides
Ke Zheng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Corrosion and wear behavior of an electroless Ni-P/nano-SiC coating on AZ31 Mg alloy obtained through environmentally-friendly conversion coating
Nafiseh Ghavidel et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Improved corrosion resistance of hydroxyapatite coating on carbon fiber by applying SiC interlayer
Yeye Liu et al.
APPLIED SURFACE SCIENCE (2020)
Effect of interlayer design on the mechanical properties of AlTiCrN and multilayered AlTiCrN/TiSiN hard coatings
Yin-Yu Chang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Effect of Ti interlayer thickness on mechanical properties and wear resistance of TiZrN coatings on AISI D2 steel
Yu-Wei Lin et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Tantalum-Based Electrocatalyst for Polysulfide Catalysis and Retention for High-Performance Lithium-Sulfur Batteries
Zhen Zhang et al.
MATTER (2020)
Influence of Ti, Zr or Nb carbide adhesion layers on the adhesion, corrosion resistance and cell proliferation of titania doped hydroxyapatite to the Ti6Al4V alloy substrate, utilizable for orthopaedic implants
Alina Vladescu et al.
CERAMICS INTERNATIONAL (2019)
Simulation of thermal stress in ion beam sputtered Ta2O5/SiO2 multilayer coatings on different substrates by finite element analysis
Xiaoxi Tian et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Investigation of functionally graded HA-TiO2 coating on Ti-6Al-4V substrate fabricated by sol-gel method
R. Azari et al.
CERAMICS INTERNATIONAL (2019)
Finite element and experimental investigation of multiple solid particle erosion on Ti-6Al-4V titanium alloy coated by multilayer wear-resistant coating
AmirSajjad Khoddami et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Biocompatibility study of multi-layered hydroxyapatite coatings synthesized on Ti-6Al-4V alloys by RF magnetron sputtering for prosthetic-orthopaedic implant applications
Dunya Abdulsahib Hamdi et al.
APPLIED SURFACE SCIENCE (2019)
Effect of transition layer on the performance of hydroxyapatite/titanium nitride coating developed on Ti-6Al-4V alloy by magnetron sputtering
Jianwei Qi et al.
CERAMICS INTERNATIONAL (2019)
Laser surface texturing to enhance adhesion bond strength of spray coatings - Cold spraying, wire-arc spraying, and atmospheric plasma spraying
R. Kromer et al.
SURFACE & COATINGS TECHNOLOGY (2018)
In vitro biocompatibility of a nanocrystalline beta-Ta2O5 coating for orthopaedic implants
Jiang Xu et al.
CERAMICS INTERNATIONAL (2018)
Multifunctional zirconium nitride/copper multilayer coatings on medical grade 316L SS and titanium substrates for biomedical applications
D. Dinesh Kumar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Improvement in mechanical properties of nano-structured HA/TiO2 multilayer coatings deposited by high velocity suspension flame spraying (HVSFS)
Hai -Long Yao et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Evidence for structural transition in crystalline tantalum pentoxide films grown by RF magnetron sputtering
Israel Perez et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti-6Al-4V
Masoud Sarraf et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
A graded nano-TiN coating on biomedical Ti alloy: Low friction coefficient, good bonding and biocompatibility
Wenfang Cui et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
High temperature oxidation and cutting performance of AlCrN, TiVN and multilayered AlCrN/TiVN hard coatings
Yin-Yu Chang et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Study of the tribocorrosion behaviour of Ti6Al4V-HA biocomposites
M. Buciumeanu et al.
TRIBOLOGY INTERNATIONAL (2017)
Improvement of the mechanical behavior of the calcium phosphate coatings deposited onto Ti6Al4V alloy using an intermediate TiN/TiO2 bilayer
Alix Quirama et al.
VACUUM (2017)
XPS investigation of monatomic and cluster argon ion sputtering of tantalum pentoxide
Robin Simpson et al.
APPLIED SURFACE SCIENCE (2017)
Corrosion and wear behaviours of a reactive-sputter-deposited Ta2O5 nanoceramic coating
Wei Hu et al.
APPLIED SURFACE SCIENCE (2016)
Development of tantalum oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy to enhance mechanical properties and biocompatibility
B. Rahmati et al.
CERAMICS INTERNATIONAL (2016)
Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy
B. Rahmati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The effect of TiSiN interlayers on the bond strength of ceramic to NiCr and CoCr alloys
A. Vladescu et al.
CERAMICS INTERNATIONAL (2015)
Ti/TiN/HA coating on Ti-6Al-4V for biomedical applications
E. Mohseni et al.
CERAMICS INTERNATIONAL (2015)
Enhancing the adhesion strength of tantalum oxide ceramic thin film coating on biomedical Ti-6Al-4V alloy by thermal surface treatment
B. Rahmati et al.
CERAMICS INTERNATIONAL (2015)
Influence of heat treatment on bond strength and corrosion resistance of sol-gel derived bioglass-ceramic coatings on magnesium alloy
Sibo Shen et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Micro-scratch and corrosion behavior of functionally graded HA-TiO2 nanostructured composite coatings fabricated by electrophoretic deposition
Hamidreza Farnoush et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Suboxide/subnitride formation on Ta masks during magnetic material etching by reactive plasmas
Hu Li et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2015)
Influence of Ti-TiN multilayer PVD-coatings design on residual stresses and adhesion
R. Ali et al.
MATERIALS & DESIGN (2015)
Investigation on thermal stability of Ta2O5 for application at high temperature, TiO2 and Al2O3 coatings
Peng Shang et al.
APPLIED SURFACE SCIENCE (2013)
Optical properties of Ti-doped ZnO films synthesized via magnetron sputtering
Haixia Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Effect of RF power and sputtering pressure on the structural and optical properties of TiO2 thin films prepared by RF magnetron sputtering
Prabitha B. Nair et al.
APPLIED SURFACE SCIENCE (2011)
Electronic structure of δ-Ta2O5 with oxygen vacancy: ab initio calculations and comparison with experiment
Maxim V. Ivanov et al.
JOURNAL OF APPLIED PHYSICS (2011)
Fabrication of tantalum oxide/carbon nanotubes thin film composite on titanium substrate
C. Arnould et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)
Room temperature growth of nanocrystalline anatase TiO2 thin films by dc magnetron sputtering
Preetam Singh et al.
PHYSICA B-CONDENSED MATTER (2010)
Effect of growth and annealing temperatures on crystallization of tantalum pentoxide thin film prepared by RF magnetron sputtering method
Shih-jeh Jimmy Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Effect of sputtering pressure and rapid thermal annealing on optical properties of Ta2O5 thin films
Zhou Ji-cheng et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Characterization of the mechanical properties and failure modes of hard coatings deposited by RF magnetron sputtering
Fei Luo et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Characteristics and wear performance of borided Ti6Al4V alloy
Erdem Atar et al.
SURFACE & COATINGS TECHNOLOGY (2008)
A comparative study of CrN, ZrN, NbN and TaN layers as cobalt diffusion barriers for CVD diamond deposition on WC-Co tools
J. P. Manaud et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Hip implants - Paper VI - Ion concentrations
A. Sargeant et al.
MATERIALS & DESIGN (2007)
Titanium alloys for biomedical applications
H. J. Rack et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Effects of pretreatment by ion implantation and interlayer on adhesion between aluminum substrate and TiN film
YM Liu et al.
THIN SOLID FILMS (2005)
Room-temperature formation of tantalum oxide films by liquid phase deposition
CJ Huang
THIN SOLID FILMS (2005)
Comparison of metal release from various metallic biomaterials in vitro
Y Okazaki et al.
BIOMATERIALS (2005)
Reduction of friction coefficient of ultrafine-grained CP titanium
VV Stolyarov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol-gel method
HW Kim et al.
BIOMATERIALS (2004)
Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications
I Gurrappa
MATERIALS CHARACTERIZATION (2003)
Corrosion of bio implants
UK Mudali et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)
Design and evaluation of tribological coatings
S Hogmark et al.
WEAR (2000)
Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings
XB Zheng et al.
BIOMATERIALS (2000)