4.7 Article

Green, ultrafine cellulose-based porous nanofibrous membranes for efficient heavy metal removal through incorporation of chitosan by various electrospinning ways

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Synthesis of carbon/SiO2 core-sheath nanofibers with Co-Fe nanoparticles embedded in via electrospinning for high-performance microwave absorption

Ziyu Zhang et al.

Summary: This study investigates the absorbing mechanism of carbon-based nanofibers and synthesizes composite nanofibers with Co-Fe nanoparticles and SiO2, showing excellent microwave absorption performance. The optimized nanofibers provide effective ideas for high-performance microwave absorption materials synthesis.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Agricultural Engineering

Novel flexible, strong, thermal-stable, and high-barrier switchgrass-based lignin-containing cellulose nanofibrils/chitosan biocomposites for food packaging

Kaimeng Xu et al.

Summary: Chitosan/lignin-containing cellulose nanofibrils biocomposites were prepared by a facile and green method. The effects of lignin content and cellulose order degree on the transparency, mechanical properties, and thermal stability were investigated. The addition of hydrophobic micro/nano-lignin particles enhanced the dispersion of LCNF in CS matrices and improved the mechanical properties and thermal stability of the biocomposites.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Review Nanoscience & Nanotechnology

Oxidative degradation of phenols and substituted phenols in the water and atmosphere: a review

Jianfei Sun et al.

Summary: Phenols, as a class of toxic compounds, pose potential risks to the environment and human beings due to their difficulty in biodegradation. This paper reviews the environmental degradation of phenols and substituted phenols in water and air, and summarizes the methods and mechanisms for their treatment in wastewater and atmospheric degradation.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Polymer Science

Phosphorylated cellulose/electrospun chitosan nanofibers media for removal of heavy metals from aqueous solutions

Ricardo Brandes et al.

Summary: The electrospun chitosan nonwoven mats are efficient at removing heavy metals from water, but suffer from low permeability and mechanical strength. A bilayer sorbent media has been developed to overcome these weaknesses, showing good water permeability and mechanical strength, and the ability to selectively remove heavy metal contaminants from multi-element samples.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Review Chemistry, Applied

Recent advances in heavy metal removal by chitosan based adsorbents

Utkarsh Upadhyay et al.

Summary: Chitosan derivatives show great potential in adsorbing heavy metal ions, with common modification methods being crosslinking and grafting. Adsorption equilibrium and kinetics can be successfully modeled using the Pseudo-second order kinetic model and Langmuir isotherm.

CARBOHYDRATE POLYMERS (2021)

Article Engineering, Chemical

Chitosan nanofiltration membranes with gradient cross-linking and improved mechanical performance for the removal of divalent salts and heavy metal ions

Binbin Yang et al.

Summary: In this study, a positively charged composite nanofiltration membrane was prepared on a polyethersulfone ultrafiltration membrane, showing excellent molecular weight cut-off and high removal rate for heavy metal ions. The membrane can be used to reduce water hardness and produce potable water.

DESALINATION (2021)

Article Materials Science, Multidisciplinary

Comparative effects of electrospinning ways for fabricating green, sustainable, flexible, porous, nanofibrous cellulose/chitosan carbon mats as anode materials for lithium-ion batteries

Zhihui Wang et al.

Summary: Bio-nitrogen-doped composite carbon nanofibrous mats were developed from natural cellulose and chitosan for use in lithium-ion batteries, showing good electrochemical performance and cycling stability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Multidisciplinary Sciences

Developing fibrillated cellulose as a sustainable technological material

Tian Li et al.

Summary: Fibrillated cellulose, derived from renewable resources, has unique technological appeal and sustainability potential. Research demonstrates its wide applications in material fabrication, but challenges remain to be overcome.

NATURE (2021)

Article Materials Science, Paper & Wood

Cellulose reinforced electrospun chitosan nanofibers bio-based composite sorbent for water treatment applications

Ilse Ileana Cardenas Bates et al.

Summary: A bio-based composite material for water treatment applications was fabricated for the first time, combining chitosan-polyethylene oxide and TEMPO-oxidized cellulose. Fourier Transform Infrared Spectroscopy was used to analyze the structure of the material, and varied electrospinning times revealed that the optimal condition was 2 hours.

CELLULOSE (2021)

Review Nanoscience & Nanotechnology

Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors

Yongpeng Ma et al.

Summary: This study summarizes recent advances in transition metal oxides as electrodes for high-performance supercapacitors in different dimensions, highlighting the importance of the relationship between structure and property in designing and synthesizing high-performance transition metal oxide-based supercapacitor electrodes.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Engineering, Chemical

Removal of heavy metal ions from wastewater: a comprehensive and critical review

Naef A. A. Qasem et al.

Summary: Removal of heavy metal ions from wastewater is crucial for a clean environment and human health, with methods including adsorption, membrane, chemical, electric, and photocatalytic treatments. Recent studies have mainly focused on adsorption techniques, facing challenges in removing different ion types concurrently, high retention time, and cycling stability of adsorbents.

NPJ CLEAN WATER (2021)

Article Nanoscience & Nanotechnology

Poly(sodium-p-styrenesulfonate)-grafted UiO-66 composite membranes boosting highly efficient molecular separation for environmental remediation

Xi Quan Cheng et al.

Summary: The highly dispersed UiO-66-PSS nanoparticles show promise in constructing molecular separation membranes with high separation performance for environmental remediation, significantly improving permeance and selectivity of the membranes.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Synthesis and characterization of ZnNiCr-layered double hydroxides with high adsorption activities for Cr(VI)

Lin Guo et al.

Summary: ZnNiCr-layered double hydroxides (LDHs) were synthesized using the microwave hydrothermal method for Cr(VI) removal, exhibiting a high adsorption capacity at pH=2 compared to ZnCr-LDHs and NiCr-LDHs. The materials have potential application prospects for the removal of Cr(VI) in wastewater.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Selective removal of As(V) from wastewater with high efficiency by glycine-modified Fe/Zn-layered double hydroxides

Chongzhi Yin et al.

Summary: The study focuses on improving the adsorption effect and selectivity of layered double hydroxides (LDHs) for oxyanions by preparing glycine-modified Fe/Zn-LDH (GFeZn). The GFe(1)Zn(1) with a Fe/Zn mole ratio of 1:1 achieved excellent selectivity for As(V), with a saturated adsorption capacity of 859.52 mg/g and an adsorption equilibrium established between 60 and 120 minutes. The GFe(1)Zn(1) also showed excellent reusability with only a 13.30% decrease in adsorption capacity after 5 adsorption/desorption cycles, providing a new method for selectively removing As(V) from polluted water.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption

Peitao Xie et al.

Summary: This study prepared Co/C nanocomposites with Co nanoparticles uniformly distributed in amorphous carbon sheets, achieving excellent absorption performance through hierarchical porous microstructures. Excellent absorption performance was achieved at 10% and 15% Co/C content levels, providing a new pathway for designing ultralight absorbers.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Biochemistry & Molecular Biology

Electrospun cellulose acetate nanofiber incorporated with hydroxyapatite for removal of heavy metals

Azhar A. Hamad et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Polymer Science

Electrospun cellulose acetate/P(DMDAAC-AM) nanofibrous membranes for dye adsorption

Qing Xu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Review Chemistry, Applied

Recent advances on sustainable cellulosic materials for pharmaceutical carrier applications

Guihua Yan et al.

CARBOHYDRATE POLYMERS (2020)

Article Biochemistry & Molecular Biology

A facile strategy towards heterogeneous preparation of thermoplastic cellulose grafted polyurethane from amorphous regenerated cellulose paste

De-Fa Hou et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Polymer Science

Preparation of Chitosan/Polyvinyl Alcohol Electrospinning Nano-Membranes Using the Green Solvent, Plasma Acid

Ying Wang et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2020)

Article Environmental Sciences

Composite nanofibers membranes of poly(vinyl alcohol)/chitosan for selective lead(II) and cadmium(II) ions removal from wastewater

Mohammad Rezaul Karim et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2019)

Article Engineering, Environmental

Novel crosslinked chitosan for enhanced adsorption of hexavalent chromium in acidic solution

Mohammadtaghi Vakili et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Environmental

Efficient detection and adsorption of cadmium(II) ions using innovative nano-composite materials

Md. Rabiul Awual et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Biochemistry & Molecular Biology

Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine

Saad B. Qasim et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)

Review Agriculture, Multidisciplinary

Emerging Chitosan-Based Films for Food Packaging Applications

Hongxia Wang et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2018)

Article Engineering, Environmental

Chitosan/(polyvinyl alcohol)/zeolite electrospun composite nanofibrous membrane for adsorption of Cr6+, Fe3+ and Ni2+

Umma Habiba et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Review Polymer Science

Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials

Guolong Wang et al.

PROGRESS IN POLYMER SCIENCE (2017)

Article Engineering, Environmental

Removal of Pb (II) and Cu (II) ions from wastewater using composite electrospun cellulose acetate/titanium oxide (Ti02) adsorbent

Kibrom Alebel Gebru et al.

JOURNAL OF WATER PROCESS ENGINEERING (2017)

Article Chemistry, Applied

Electrospun ultra-fine cellulose acetate fibrous mats containing tannic acid-Fe3+ complexes

Weiqiao Yang et al.

CARBOHYDRATE POLYMERS (2017)

Article Thermodynamics

Thermal stability of cellulose nanomaterials and their composites with polyvinyl alcohol (PVA)

Allison A. Rowe et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Article Engineering, Biomedical

Electrospinning, mechanical properties, and cell behavior study of chitosan/PVA nanofibers

Mojtaba Koosha et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)

Article Chemistry, Applied

Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose

Cristina Stefanescu et al.

CARBOHYDRATE POLYMERS (2012)

Article Materials Science, Paper & Wood

Hybrid electrospun nonwovens from chitosan/cellulose acetate

George Salihu et al.

CELLULOSE (2012)

Review Polymer Science

Electrospraying of polymers with therapeutic molecules: State of the art

N. Bock et al.

PROGRESS IN POLYMER SCIENCE (2012)

Article Engineering, Manufacturing

Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials

Jue Lu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)

Article Engineering, Environmental

Dispersion of chitosan on perlite for enhancement of copper(II) adsorption capacity

Shameem Hasan et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Materials Science, Paper & Wood

PEGylation of chitosan for improved solubility and fiber formation via electrospinning

Jian Du et al.

CELLULOSE (2007)

Article Chemistry, Physical

Preparation of electrospun chitosan/poly(vinyl alcohol) membranes

Yuanyuan Zhang et al.

COLLOID AND POLYMER SCIENCE (2007)

Article Engineering, Chemical

Adsorptive removal of copper ions with highly porous chitosan/cellulose acetate blend hollow fiber membranes

Chunxiu Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2006)

Article Engineering, Chemical

Adsorption of divalent cadmium (Cd(II)) from aqueous solutions onto chitosan-coated perlite beads

Shameem Hasan et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)

Article Engineering, Chemical

Copper adsorption on chitosan-cellulose hydrogel beads: behaviors and mechanisms

N Li et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2005)

Article Thermodynamics

Thermogravimetric and FTIR studies of chitosan blends

A Pawlak et al.

THERMOCHIMICA ACTA (2003)

Article Biochemistry & Molecular Biology

Relation between solution properties and degree of acetylation of chitosan: Role of aging

P Sorlier et al.

BIOMACROMOLECULES (2002)