☆ 4.8 Review

Lignin valorization: Status, challenges and opportunities

BIORESOURCE TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Synthesis of a lignin-based alcohol ether carboxylate surfactant and its application as cotton fiber detergent

Juhua Ou et al.

Summary: Alkyl glycidyl ether and 3-chloropropionic acid were grafted onto alkaline lignin to obtain a lignin-based alcohol ether carboxylate surfactant (KLS). The pretreatment of alkaline lignin using ultrasound activated the molecular structure and affected its properties. The KLSU solution, obtained through ultrasound treatment at 70 degrees C, showed good surface activity, emulsifying ability, and detergent properties.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Agricultural Engineering

Construction of a fungal consortium for effective degradation of rice straw lignin and potential application in bio-pulping

Jinghong Wang et al.

Summary: The established LDFC co-culture consortium improved the lignin degradation rate by fungi, with an optimal cultivation condition of a 1:1:1 vol ratio of each fungus resulting in a 39.7% lignin degradation rate. Papermaking using LDFC-treated rice straw produced paper with a tensile strength of 8N and a ring pressure index of 2.46 N.m/g, meeting standards for corrugated paper production.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Agricultural Engineering

Microbial valorization of lignin: Prospects and challenges

R. Reshmy et al.

Summary: Lignin, the second most prevalent biomaterial, can be valorized using bacteria to produce valuable products. Challenges include product separation and purification difficulties, as well as methods to enhance lignin decomposition.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Catalytic depolymerization of Kraft lignin to liquid fuels and guaiacol over phosphorus modified Mo/Sepiolite catalyst

Mingqiang Chen et al.

Summary: Phosphorus-modified Mo/Sepiolite catalysts can regulate Kraft lignin conversion, reducing lignin oil yield and HHV while significantly increasing the productivity of phenolic compounds. The optimized distribution between Mo5+ sites and acid strength/type in 5P-Mo/SEP results in lignin oil with a higher HHV compared to Kraft lignin.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Polymer Science

Super-tough sustainable biobased composites from polylactide bioplastic and lignin for bio-elastomer application

Mohamed A. Abdelwahab et al.

Summary: A sustainable multifunctional biobased composite with superior toughness was engineered using PLA and OL, demonstrating a new strategy for producing high performance PLA materials. The composites displayed increased elongation at break and notched impact strength, indicating improved toughness while maintaining lower tensile strength and modulus.

POLYMER (2021)

Add to Collection

Article Chemistry, Physical

Reductive liquefaction of lignin to monocyclic hydrocarbons: ReS2/Al2O3 as efficient char inhibitor and hydrodeoxygenation catalyst

Pouya Sirous-Rezaei et al.

Summary: The ReS2/Al2O3 catalyst showed high char-suppressing potential and high hydrodeoxygenation efficiency in the reductive liquefaction of kraft lignin, significantly outperforming the conventional sulfide catalyst NiMo/Al2O3. The catalytic performance of ReS2/Al2O3 is attributed to its high oxophilicity, metal-like behavior of rhenium sulfide, and sufficient acidity, playing a crucial role in determining the reaction pathway towards either solid char residues or liquid monomeric products in alkali-assisted depolymerization of lignin.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Agricultural Engineering

Catalytic hydrogenolysis of lignin in ethanol/isopropanol over an activated carbon supported nickel-copper catalyst

Chongbo Cheng et al.

Summary: In this study, catalytic hydrogenolysis of organosolv poplar lignin was conducted using NiCu/C catalysts in ethanol/isopropanol solvent, achieving high yields of phenolic monomers. The introduction of Cu in catalysts promoted the hydrogen donor process of the solvent and facilitated the cleavage of lignin linkages, resulting in decreased molecular weight of bio-oil. The possible lignin dimer type structures were proposed and identified by MALDI-TOF MS, providing a better understanding of NiCu/C catalyzed lignin depolymerization.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Catalytic hydrogenolysis of alkali lignin in supercritical ethanol over copper monometallic catalyst supported on a chromium-based metal-organic framework for the efficient production of aromatic monomers

My Ha Tran et al.

Summary: This study optimized the reaction conditions for the catalytic hydrogenolysis of alkali lignin using a copper catalyst on an MIL-101(Cr) support with supercritical ethanol, resulting in a 38.5% yield of aromatic monomers. The depolymerized lignin stream obtained can serve as a promising aromatic feedstock and carbon source for further microbial upgrading and bioconversion to produce various value-added products.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Oxidative valorisation of lignin into valuable phenolics: Effect of acidic and basic catalysts and reaction parameters

Avnish Kumar et al.

Summary: The study investigated the depolymerization of rice straw alkali lignin using acidic, basic catalysts, and their mixtures. Results showed that the highest bio-oil yield was achieved with pure ZSM-5 and hydrogen peroxide in a nitrogen atmosphere, while the highest conversion rate was observed in an oxygen environment. Characterization of the bio-oils was done using GC-MS, 1H NMR, FT-IR, and showed selectivity towards 2-methoxy-4-vinylphenol.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Deconstruction of biomass into lignin oil and platform chemicals over heteropoly acids with carbon-supported palladium as a hybrid catalyst under mild conditions

Haichuan Zhang et al.

Summary: This study achieved near-complete conversion of lignocellulosic biomass and high products yields through catalytic transfer hydrogenolysis (CTH) using SiW12 synergistic with Pd/C catalyst. SiW12 exhibited the highest activity on disrupting C-C linkages and C-O linkages, leading to increased monophenols yields. Significant structural changes were observed in lignin oil, and the particle size of feedstock also had a significant impact on the distribution and yields of monophenols.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Catalytic hydrothermal liquefaction of alkali lignin over activated bio-char supported bimetallic catalyst

Bijoy Biswas et al.

Summary: Carbon-based support catalysts play a crucial role in optimizing the hydrothermal liquefaction of alkali lignin, leading to increased bio-oil yield through efficient depolymerization. The use of ethanol solvent system, higher reaction temperatures, and increased catalyst quantities results in enhanced conversion and selectivity towards vanillin.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Tandem conversion of lignin to catechols via demethylation and catalytic hydrogenolysis

Kwang Ho Kim et al.

Summary: Lignin is considered a potential source of aromatic compounds and chemicals, with catechols playing a crucial role in various industrial sectors. The global market for catechols is expanding, and the selective production of catechols from lignin through DFCH shows promising potential for efficient and sustainable valorization of lignin. This approach provides valuable insights for the transformation of lignin into specific platform chemicals.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin-Zein Composite: Synthesis, Three-Dimensional Printing, and Microbial Degradation

Jin Gyun Lee et al.

Summary: Researchers have developed a fully plant-based, rapidly degradable lignin and zein composite blend that can be transformed into various 3D structures using extrusion 3D printing. The blend, consisting of corn-derived zein and insoluble lignin granules, exhibits good biodegradability and processability, potentially reducing our dependence on petroleum oil-based plastics.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Agricultural Engineering

Directional depolymerization of lignin into high added-value chemical with synergistic effect of binary solvents

Zhongzhi Yang et al.

Summary: A one-pot method was used to depolymerize organosolv lignin into high added-value phenolic monomers in a synergistic reaction system with methanol-dimethoxymethane binary solvents and acid catalyst. The optimal conditions for maximum yield of liquid products and phenolic monomers were determined through careful investigation of solvent composition and reaction parameters. The proposed mechanism for lignin depolymerization provides promising prospects for developing effective methods to obtain high added-value phenolic compounds from lignin.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Hydroconversion of Kraft lignin for biofuels production using bifunctional rhenium-molybdenum supported zeolitic imidazolate framework nanocatalyst

Ge Guo et al.

Summary: The bimetallic ReMo@ZNB catalyst showed excellent catalytic activity in lignin depolymerization, with high product yields and a high calorific value of 32.33 MJ/kg, indicating potential for improving lignin hydroconversion. The catalyst also demonstrated superior recyclability and regeneration, with structural changes induced by the incorporation of ReMo leading to improved hydrogenation and acid adsorption properties.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Selective production of phenolic monomers via high efficient lignin depolymerization with a carbon based nickel-iron-molybdenum carbide catalyst under mild conditions

Bochao Yan et al.

Summary: A non-precious carbon-based metal-Mo2C catalytic system has been developed for the selective production of phenolic monomers from organosolv lignin depolymerization. The optimized Ni-Fe-Mo2C catalyst achieved high liquefaction and phenolic monomer yields in a water-methanol solvent. The results demonstrate the potential of the Ni-Fe-Mo2C catalytic system for valuable phenolic monomer production from lignin under mild conditions.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Catalytic hydrothermal liquefaction of lignin for production of aromatic hydrocarbon over metal supported mesoporous catalyst

Li Feng et al.

Summary: Catalytic hydrothermal liquefaction of lignin was studied using different solvents and catalyst conditions, revealing that Ni-Al/MCM-41 catalyst achieved the highest bio-oil yield in ethanol solvent. Alcoholic solvents promoted lignin decomposition, while water solvent significantly improved lignin degradation in the presence of catalyst.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Breaking the lignin conversion bottleneck for multiple products: Co-production of aryl monomers and carbon nanospheres using one-step catalyst-free depolymerization

Wenliang Wang et al.

Summary: The study introduces a novel one-step catalyst-free depolymerization strategy for lignin, converting it into aryl monomers and carbon nanospheres simultaneously at certain temperatures. By utilizing microwave hot-spots and CH2Cl2 vapors, the reaction is promoted to produce high yields of organic aromatic chemicals and carbon materials.

FUEL (2021)

Add to Collection

Review Energy & Fuels

Biomass-based biorefineries: An important architype towards a circular economy

Bikash Kumar et al.

Summary: Bio-based biorefineries provide a potential alternative to fossil-based resources, utilizing natural organic biomass for biofuel and biochemical production at a large scale. The integration of existing technologies can facilitate sustainable development and economic growth, with biomass as a abundant and technologically advanced resource for the future.

FUEL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial and Emulsion Characteristics of Oil-Water Systems in the Presence of Polymeric Lignin Surfactant

Nasim Ghavidel et al.

Summary: Polymeric lignin surfactants have different affinities for stabilizing oil-water emulsions, and their emulsifying performance is significantly influenced by their adsorption behavior at the oil-water interface. The adsorption performance of sulfethylated lignin (SEKL) surfactant at different oil-water interfaces was examined to reveal the mechanisms of SEKL adsorption. Additionally, the impact of SEKL concentration and ionic strength on its effectiveness as an emulsifier was studied.

LANGMUIR (2021)

Add to Collection

Article Engineering, Chemical

Phenol-enriched hydroxy depolymerized lignin by microwave alkali catalysis to prepare high-adhesive biomass composites

Bing Di et al.

Summary: This study successfully prepared high-adhesive lignin-phenolic resin using microwave depolymerization method, showing great potential for applications. Under specific conditions of sodium hydroxide concentration, temperature, and time, the depolymerization of lignin yielded the highest phenolic hydroxy content, leading to the formation of dense and uniform pine needle units in the lignin-based phenolic resin with significantly higher bonding strength compared to other modification methods.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of compatibilizers on lignin/bio-polyamide blend carbon precursor filament properties and their potential for thermostabilisation and carbonisation

R. Muthuraj et al.

Summary: Reactive compatibilization using MA and GMA can enhance the compatibility between TcC and PA1010, with MA being more effective but leading to slightly inferior properties of the carbon fibers. Accurate control of stress during thermostabilization and carbonization stages is crucial for optimizing the properties of the compatibilized carbon fibers.

POLYMER TESTING (2021)

Add to Collection

Article Environmental Sciences

Novel fluorescent lignin-based hydrogel with cellulose nanofibers and carbon dots for highly efficient adsorption and detection of Cr(VI)

Hanmeng Yuan et al.

Summary: A novel fluorescent lignin-based hydrogel was synthesized with cellulose nanofibers and carbon dots for highly efficient adsorption and detection of Cr(VI). The 3D porous structures in the hydrogel provided active sites and ion transport channels, enhancing the adsorption and stabilization of fluorescence signal for improved detection.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Polymer Science

Preparation of Chemically Modified Lignin-Reinforced PLA Biocomposites and Their 3D Printing Performance

Seo-Hwa Hong et al.

Summary: By conducting a simple esterification reaction, pristine lignin was converted to a new lignin modified with a terminal carboxyl group. Incorporating the COOH-lignin into PLA biocomposites can reduce the cost of printing PLA 3D filaments without altering their thermal and mechanical properties.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Selective Laser Sintering of Lignin-Based Composites

Rubina Ajdary et al.

Summary: In the study, lignin was introduced as a suitable component for selective laser sintering (SLS) of polyamide (PA12) to reduce costs while maintaining or improving processability and performance. The addition of lignin in SLS resulted in composite material with improved thermal stability and mechanical properties, while also influencing the surface properties and wettability of the structures. The research demonstrated the potential of lignin valorization in composites through SLS, allowing for reduced cost, scalability, and easy processing.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Depolymerization and conversion of lignin to value-added bioproducts by microbial and enzymatic catalysis

Caihong Weng et al.

Summary: Lignin, the most abundant renewable aromatic compound in nature, is hindered by its intrinsic heterogeneity and recalcitrance; bioprocessing with microbial and enzymatic catalysis offers an efficient method for lignin depolymerization and conversion into value-added bioproducts.

BIOTECHNOLOGY FOR BIOFUELS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Renewable lignin-based surfactant modified layered double hydroxide and its application in polypropylene as flame retardant and smoke suppression

Kun Wu et al.

Summary: A novel lignin-based surfactant modified layered double hydroxide flame retardant was successfully fabricated and incorporated into polypropylene matrix, resulting in improved flame retardant properties including reduced peak heat release rate, total heat release, and total smoke release. The well-dispersed LDH-LS and synergistic flame retardancy between LDH and SLS contributed to these improvements.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Mario Culebras et al.

Summary: The study successfully synthesized hydrogels using lignin, a non-valorized biopolymer, crosslinked with PEGDGE. The ratio of crosslinker used influenced the structural and chemical properties of the resulting hydrogels, with increased crosslinker amount leading to smaller pore size and higher swelling capacity. Paracetamol release test showed higher drug diffusion for hydrogels produced with a lignin:PEGDGE ratio of 1:1.

MOLECULES (2021)

Add to Collection

Article Agricultural Engineering

Molybdenum-catalyzed hydrogenolysis of herbaceous biomass: A procedure integrated lignin fragmentation and components fractionation

Xue Gong et al.

Summary: The study demonstrated the successful utilization of a low-cost MoO2/C catalyst for reductive catalytic fractionation of various herbaceous biomass feedstocks, resulting in high yields and selectivity of phenolic monomers, along with the production of solid carbohydrate pulps suitable for enzymatic hydrolysis.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Mild depolymerization of the sinocalamus oldhami alkali lignin to phenolic monomer with base and activated carbon supported nickel-tungsten carbide catalyst composite system

Xiuhua Lin et al.

Summary: The study demonstrated that the composite alkali and Ni-W2C/activated carbon showed significant catalytic activity in the depolymerization of sinocalamus oldhami alkali lignin, resulting in high degradation efficiency and phenolic product formation under mild conditions.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Paper & Wood

Design and Performance of Amphiphilic Lignin Derivatives in Enzymatic Hydrolysis of Sweet Sorghum Bagasse for Bioethanol Production

Nissa Nurfajrin Solihat et al.

Summary: This study compared the impact of different variables on enzymatic hydrolysis of sweet sorghum bagasse (SSB) kraft pulp and found that amphiphilic lignin derivatives (A-LD) significantly improved the enzymatic hydrolysis performance.

BIORESOURCES (2021)

Add to Collection

Article Chemistry, Physical

Nano WO3-Catalyzed One-Pot Process for Mild Oxidative Depolymerization of Lignin and its Model Compounds

Jing Liang et al.

Summary: A new one-pot process for the mild oxidative depolymerization of lignin and lignin model compounds has been developed, achieving high yields and monomeric selectivity. The method utilizes nano WO3 as catalyst, tert-butyl hydrogen peroxide as oxidant, and NaOH as additive, providing a potential for transforming lignin into high-value commodity chemicals.

CHEMCATCHEM (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Conversion of biomass to biofuels and life cycle assessment: a review

Ahmed Osman et al.

Summary: The global energy demand is projected to increase by nearly 28% by 2040, leading to a growing interest in utilizing biomass as a renewable energy source for producing biofuels. Life cycle assessment plays a crucial role in providing insights into the environmental impacts associated with biofuel production chains. The integration of thermochemical and biochemical conversion routes shows promise for enhancing process efficiency in biomass-to-biofuel conversion, with ongoing research and publication efforts focusing on addressing knowledge gaps in the field.

ENVIRONMENTAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Agricultural Engineering

Synthesis and characterization of an amphiphilic lignin-based cationic surfactant

Qingyu Xu et al.

Summary: By introducing a lipophilic group and a hydrophilic group into alkali lignin, a lignin-based amphiphilic cationic surfactant was successfully constructed in this study. The surfactant showed good performance and can be used as an asphalt emulsifier, wetting agent, etc.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Agricultural Engineering

Lignin-based electrodes for energy storage application

Huayu Liu et al.

Summary: Lignin, as the second most abundant organic polymer in nature, has shown promising potential for energy storage applications due to its low cost, high carbon content, and plentiful functional groups. Recent research has focused on the design and fabrication of lignin-based electrode materials, providing new material options for supercapacitors and batteries.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Development of functional lignin-based spherical particles for the removal of vanadium(V) from an aqueous system

Malgorzata Stanisz et al.

Summary: A new type of functional lignin-based spherical particles (L-CTAB) prepared with the use of hexadecyltrimethylammonium bromide (CTAB) was found to be an effective biosorbent for removing vanadium(V) ions, with a maximum sorption capacity of 10.79 mg/g. The adsorption of V(V) ions on the surface of L-CTAB was discovered to be a heterogeneous, endothermic, and spontaneous reaction.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Facile synthesis of lignin-based epoxy resins with excellent thermal-mechanical performance

Xiang Zhen et al.

Summary: A novel strategy was proposed to synthesize phenolated lignin incorporated novolac epoxy networks (PLIENs), which showed preferable mechanical and thermal properties. The research revealed that lignin has a certain promoting effect on the flame retardancy of epoxy resins.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Photocatalytic depolymerization of organosolv lignin into valuable chemicals

Jie Xu et al.

Summary: The study successfully synthesized a Zn4In2S7 (ZIS)-based photocatalyst, demonstrating its efficient depolymerization of lignin and increase in valuable chemical product yield.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior

A. Buzarovska et al.

Summary: The study prepared PLA/aL composites and found that aL significantly affected the crystallization behavior of PLA, resulting in improved water barrier properties and photodegradability. Additionally, these composites exhibited good antimicrobial properties and biocompatibility, making them potentially suitable for use in food packaging.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Paper & Wood

Kraft lignin as a partial replacement for a traditional surfactant in thymol-based biocidal suspensions: physical and chemical features

Aline K. Soares et al.

Summary: Thymol, a renewable substance with high antimicrobial efficiency, can be solubilized in water using kraft lignin as a replacement for traditional surfactants. The study demonstrates a novel method for stabilizing a thymol-based biocide with high fungicidal activity using lignin. Lignin is crucial for stabilizing the suspensions.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Oxidative Catalytic Fractionation and Depolymerization of Lignin in a One-Pot Single-Catalyst System

Xu Du et al.

Summary: In this study, a new oxidative catalytic fractionation (OCF) process using polyoxometalate (POM) as the only catalyst was developed to depolymerize lignin to lignin-derived chemicals (LDCs). The process involved methoxylation of lignin followed by heating to convert a significant portion of lignin to LDCs, including a high content of aromatic monomers (45.9%). This provides an efficient and novel method for the utilization of lignin.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Decoding lignin valorization pathways in the extremophilic Bacillus ligniniphilus L1 for vanillin biosynthesis

Daochen Zhu et al.

Summary: This study investigated the biosynthesis of vanillin through lignin depolymerization using extremophilic Bacillus ligniniphilus L1, and successfully increased vanillin production through genetic engineering and lignin pretreatment strategies. A cell milking approach was developed to address vanillin cytotoxicity, leading to significantly higher vanillin yields compared to traditional fermentation methods. This research demonstrates a biosynthetic platform for vanillin production and offers a promising avenue for cleaner production of valuable chemicals from lignin.

GREEN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Comparative study of the solvolytic deconstruction of corn stover lignin in batch and flow-through reactors

Daniel Vincent Sahayaraj et al.

Summary: The solvolysis of industrial corn stover lignin in methanol and ethanol was carried out to deconstruct lignin into monomers and small oligomers using various reactor configurations. The use of flow-through reactor systems proved to be more effective in achieving higher yields of monomers and solvent-soluble products. Furthermore, subsequent upgrading of the deconstructed fractions through fast pyrolysis resulted in increased phenolic monomer yield and decreased char formation.

GREEN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Catalytic lignin valorization over HSZ-supported CuNiAl-based catalysts with microwave heating

Peng Liu et al.

Summary: Microwave assisted lignin depolymerization was studied over HSZ-supported CuNiAl-based catalysts. Improvements in bio-oil properties were observed under mild conditions, and the increased acidity in the catalyst could facilitate lignin depolymerization.

NEW JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Access to tough and transparent nanocomposites via Pickering emulsion polymerization using biocatalytic hybrid lignin nanoparticles as functional surfactants

Adrian Moreno et al.

Summary: This study successfully improved the mechanical properties and protective properties of polystyrene and poly(butyl methacrylate) nanocomposites by enhancing the interfacial binding strength of lignin within the synthetic polymer composites, providing a novel and environmentally friendly route for producing strong and transparent polymeric nanocomposites.

GREEN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Novel composite hydrogels containing fractionated, purified lignins for aqueous-based separations

Nicholas Gregorich et al.

Summary: A series of novel lignin-based hydrogel composites were synthesized by incorporating ultraclean lignins into poly(vinyl alcohol), resulting in significant reduction in methylene blue permeability. The concentration and functionalization of lignins directly impact the network structure of the soft composites, with increased lignin concentration leading to a decrease in molecular weight between crosslinks.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Analytical

Polyvinyl alcohol/gelatin irradiated blends filled by lignin as green filler for antimicrobial packaging materials

Khaled F. El-Nemr et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Assessment of green approaches for the synthesis of physically crosslinked lignin hydrogels

Amaia Morales et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Article Acoustics

High-intensity ultrasound-assisted formation of cellulose nanofiber scaffold with low and high lignin content and their cytocompatibility with gingival fibroblast cells

Raquel Razzera Huerta et al.

ULTRASONICS SONOCHEMISTRY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Highly efficient and stable catalysis of p-nitrophenol via silver/lignin/polyacrylic acid hydrogel

Ce Gao et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Biomedical

Combination and processing keratin with lignin as biocomposite materials for additive manufacturing technology

Warren J. Grigsby et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Three-Dimensional Printed Cell Culture Model Based on Spherical Colloidal Lignin Particles and Cellulose Nanofibril-Alginate Hydrogel

Xue Zhang et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Agricultural Engineering

Catalytic hydrotreatment of kraft lignin into aromatic alcohols over nickel-rhenium supported on niobium oxide catalyst

Liping Kong et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Signally improvement of polyurethane adhesive with hydroxy-enriched lignin from bagasse

YinChen Chen et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Soft template-based bismuth doped zinc oxide nanocomposites for photocatalytic depolymerization of lignin

Samia Kausar et al.

INORGANICA CHIMICA ACTA (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Lignin/poly(butylene succinate) composites with antioxidant and antibacterial properties for potential biomedical applications

Juan Dominguez-Robles et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Hydrogel synthesis based on lignin/sodium alginate and application in agriculture

Bin Song et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Agriculture, Multidisciplinary

Construction of a Lignosulfonate-Lysine Hydrogel for the Adsorption of Heavy Metal Ions

Chenglong Jiang et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hydroxypropyl-modified and organosolv lignin/bio-based polyamide blend filaments as carbon fibre precursors'

R. Muthuraj et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Highly compressible lignin hydrogel electrolytes via double-crosslinked strategy for superior foldable supercapacitors

Tao Liu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Extraction of High-Purity Lignins via Catalyst-free Organosolv Pulping from Low-Input Crops

Jessica Rumpf et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Agricultural Engineering

Enzymatic hydrolysis of lignin by ligninolytic enzymes and analysis of the hydrolyzed lignin products

Sitong Zhang et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Incorporating Lignin into Polyethylene Glycol Enhanced Its Performance for Promoting Enzymatic Hydrolysis of Hardwood

Chenhuan Lai et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Efficient Depolymerization of Alkaline Lignin to Phenolic Compounds at Low Temperatures with Formic Acid over Inexpensive Fe-Zn/Al2O3 Catalyst

Xinyu Lu et al.

ENERGY & FUELS (2020)

Add to Collection

Article Polymer Science

Effect of soft segment molecular weight and NCO:OH ratio on thermomechanical properties of lignin-based thermoplastic polyurethane adhesive

Julia Rocha Gouveia et al.

EUROPEAN POLYMER JOURNAL (2020)

Add to Collection

Article Agriculture, Multidisciplinary

pH-Responsive Lignin-Based Nanomicelles for Oral Drug Delivery

Lianghao Cheng et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2020)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Editorial: Artificial Intelligence in Chemistry

John C. Cancilla et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Promising photocatalytic degradation of lignin over carbon quantum dots decorated TiO2 nanocomposite in aqueous condition

Shelja Sharma et al.

APPLIED CATALYSIS A-GENERAL (2020)

Add to Collection

Article Plant Sciences

Lignin-based hydrogel alleviates drought stress in maize

Najmeh Mazloom et al.

ENVIRONMENTAL AND EXPERIMENTAL BOTANY (2020)

Add to Collection

Review Agricultural Engineering

Recent advances in organosolv fractionation: Towards biomass fractionation technology of the future

Petter Paulsen Thoresen et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Alginate-based hydrogels modified with olive pomace and lignin to removal organic pollutants from aqueous solutions

Francisco Flores-Cespedes et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Development of antioxidant and antimicrobial xanthan-based cryogels with tuned porous morphology and controlled swelling features

Irina Elena Raschip et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Engineering, Environmental

Simultaneous removal of Pb2+, Cu2+ and Cd2+ ions from wastewater using hierarchical porous polyacrylic acid grafted with lignin

Mengyu Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Fabrication of lignin/poly(3-hydroxybutyrate) nanocomposites with enhanced properties via a Pickering emulsion approach

Ishaq Lugoloobi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Combined Catalysis for Engineering Bioinspired, Lignin-Based, Long-Lasting, Adhesive, Self-Mending, Antimicrobial Hydrogels

Samson Afewerki et al.

ACS NANO (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation and characterization of nanosized lignin fromoil palm (Elaeis guineensis) biomass as a novel emulsifying agent

Siti Hajar Sekeri et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Direct Ink Writing of Fully Bio-Based Liquid Crystalline Lignin/ Hydroxypropyl Cellulose Aqueous Inks: Optimization of Formulations and Printing Parameters

Lisa-Sophie Ebers et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrophobic, UV resistant and dielectric polyurethane-nanolignin composites with good reprocessability

Guochuang Qi et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Lignin Functionalization for the Production of Novel Materials

Stefania Bertella et al.

TRENDS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Green Carbon Nanofiber Networks for Advanced Energy Storage

Jiayuan Wei et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and Morphological Properties of Lignin-Based Thermosets

Marcus E. Jawerth et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Review Agricultural Engineering

A review on lignin structure, pretreatments, fermentation reactions and biorefinery potential

Vinoth Kumar Ponnusamy et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Lignin for white natural sunscreens

Sang Cheon Lee et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Paper & Wood

Compatibility of Kraft Lignin, Organosolv Lignin and Lignosulfonate With PLA in 3D Printing

Vebi Mimini et al.

JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2019)

Add to Collection

Article Biochemical Research Methods

Fractionation of lignocellulosic biomass to produce uncondensed aldehyde-stabilized lignin

Masoud Talebi Amiri et al.

NATURE PROTOCOLS (2019)

Add to Collection

Review Biotechnology & Applied Microbiology

A field of dreams: Lignin valorization into chemicals, materials, fuels, and health-care products

Judith Becker et al.

BIOTECHNOLOGY ADVANCES (2019)

Add to Collection

Article Multidisciplinary Sciences

Plant-inspired adhesive and tough hydrogel based on Ag-Lignin nanoparticles-triggered dynamic redox catechol chemistry

Donglin Gan et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Pharmacology & Pharmacy

Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications

Juan Dominguez-Robles et al.

PHARMACEUTICS (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Valorization of lignin in polymer and composite systems for advanced engineering applications - A review

Maurice N. Collins et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Integrating softwood biorefinery lignin into polyhydroxybutyrate composites and application in 3D printing

Alankar A. Vaidya et al.

MATERIALS TODAY COMMUNICATIONS (2019)

Add to Collection

Article Energy & Fuels

Gasification of lignin-rich residues for the production of biofuels via syngas fermentation: Comparison of gasification technologies

E. T. Liakakou et al.

FUEL (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Facile preparation of biomass lignin-based hydroxyethyl cellulose super-absorbent hydrogel for dye pollutant removal

Siqi Huang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Biomaterials

Biocompatible hydrogels of chitosan-alkali lignin for potential wound healing applications

Kartik Ravishankar et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Polymer Science

Evaluation of the Compatibility of Organosolv Lignin-Graphene Nanoplatelets with Photo-Curable Polyurethane in Stereolithography 3D Printing

Fathirrahman Ibrahim et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Biomaterials

Promoting neural cell proliferation and differentiation by incorporating lignin into electrospun poly(vinyl alcohol) and poly(glycerol sebacate) fibers

Ahmad Saudi et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing

Mihaela Tanase-Opedal et al.

MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High performance supercapacitors using lignin based electrospun carbon nanofiber electrodes in ionic liquid electrolytes

Rangana A. Perera Jayawickramage et al.

NANOTECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite

Evi Triwulandari et al.

PLASTICS RUBBER AND COMPOSITES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

New Dual Functional PHB-Grafted Lignin Copolymer: Synthesis, Mechanical Properties, and Biocompatibility Studies

Dan Kai et al.

ACS APPLIED BIO MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

From waste biomass to chemicals and energy via microwave-assisted processes

Emanuela Calcio Gaudino et al.

GREEN CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Free-standing supercapacitors from Kraft lignin nanofibers with remarkable volumetric energy density

Philipp Schlee et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and mechanical properties of coconut shell lignin-based polyurethanes synthesized by solvent-free polymerization

Francisco Avelino et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Article Biotechnology & Applied Microbiology

Life-cycle analysis of integrated biorefineries with co-production of biofuels and bio-based chemicals: co-product handling methods and implications

Hao Cai et al.

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin Functionalized with Succinic Anhydride as Building Block for Biobased Thermosetting Polyester Coatings

Carmela Scarica et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and Characterization of Lignin Hydrogels for Potential Applications as Drug Eluting Antimicrobial Coatings for Medical Materials

Eneko Larraneta et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis and characterization of silver nanoparticles loaded poly(vinyl alcohol)-lignin electrospun nanofibers and their antimicrobial activity

Keshaw Ram Aadil et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Energy & Fuels

Synthetic and lignin-based surfactants: Challenges and opportunities

Norah Alwadani et al.

CARBON RESOURCES CONVERSION (2018)

Add to Collection

Article Polymer Science

Polymer/lignin blends: Interactions, properties, applications

David Kun et al.

EUROPEAN POLYMER JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Fast microwave-assisted acidolysis: a new biorefinery approach for the zero-waste utilisation of lignocellulosic biomass to produce high quality lignin and fermentable saccharides

Long Zhou et al.

FARADAY DISCUSSIONS (2017)

Add to Collection

Article Biochemistry & Molecular Biology

Polysaccharides and lignin based hydrogels with potential pharmaceutical use as a drug delivery system produced by a reactive extrusion process

Wissam Farhat et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Polymer Science

Lignin-based polymeric surfactants for emulsion polymerization

Bernhard V. K. J. Schmidt et al.

POLYMER (2017)

Add to Collection

Article Chemistry, Physical

Fast microwave-assisted acidolysis: a new biorefinery approach for the zero-waste utilisation of lignocellulosic biomass to produce high quality lignin and fermentable saccharides

Long Zhou et al.

FARADAY DISCUSSIONS (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Opportunities for lignin valorization: an exploratory process

Stephen P. Cline et al.

ENERGY SUSTAINABILITY AND SOCIETY (2017)

Add to Collection

Article Multidisciplinary Sciences

Lignin-graft-Polyoxazoline Conjugated Triazole a Novel Anti-Infective Ointment to Control Persistent Inflammation

Denial Mahata et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Physical

Surfactant properties of PEGylated lignins: Anomalous interfacial activities at low grafting density

Kedar M. Perkins et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Add to Collection

Article Engineering, Chemical

Butyric anhydride modified lignin and its oil-water interfacial properties

Zhe Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Techno-economic assessment of hybrid extraction and distillation processes for furfural production from lignocellulosic biomass

Le Cao Nhien et al.

BIOTECHNOLOGY FOR BIOFUELS (2017)

Add to Collection

Article Agronomy

Projections of the availability and cost of residues from agriculture and forestry

Vassilis Daioglou et al.

GLOBAL CHANGE BIOLOGY BIOENERGY (2016)

Add to Collection

Article Materials Science, Paper & Wood

Controlled Pesticide Release from Porous Composite Hydrogels Based on Lignin and Polyacrylic Acid

Yajie Sun et al.

BioResources (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrogen-free catalytic fractionation of woody biomass

Maxim V. Galkin et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrasonic-assisted synthesis of sodium lignosulfonate-grafted poly(acrylic acid-co-poly(vinyl pyrrolidone)) hydrogel for drug delivery

Xiaohong Wang et al.

RSC ADVANCES (2016)

Add to Collection

Article Biotechnology & Applied Microbiology

Biofuels 2020: Biorefineries based on lignocellulosic materials

Miguel Valdivia et al.

MICROBIAL BIOTECHNOLOGY (2016)

Add to Collection

Article Agricultural Engineering

Efficient and product-controlled depolymerization of lignin oriented by metal chloride cooperated with Pd/C

Riyang Shu et al.

BIORESOURCE TECHNOLOGY (2015)

Add to Collection

Article Polymer Science

Preparation of bio-based rigid polyurethane foam using hydrolytically depolymerized Kraft lignin via direct replacement or oxypropylation

Nubla Mahmood et al.

EUROPEAN POLYMER JOURNAL (2015)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Unlocking the potential of a sleeping giant: lignins as sustainable raw materials for renewable fuels, chemicals and materials

Pieter C. A. Bruijnincx et al.

GREEN CHEMISTRY (2015)

Add to Collection

Review Forestry

Conversion of technical lignins to functional materials with retained polymeric properties

Yasuyuki Matsushita

JOURNAL OF WOOD SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of a new lignin-based anionic/cationic surfactant and its solution behaviour

Mingsong Zhou et al.

RSC ADVANCES (2015)

Add to Collection

Article Biotechnology & Applied Microbiology

Lignin pyrolysis for profitable lignocellulosic biorefineries

Paul J. De Wild et al.

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2014)

Add to Collection

Article Materials Science, Paper & Wood

Economic Analysis of an Organosolv Process for Bioethanol Production

Jesse Kautto et al.

BioResources (2014)

Add to Collection

Article Multidisciplinary Sciences

Lignin valorization through integrated biological funneling and chemical catalysis

Jeffrey G. Linger et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)

Add to Collection

Review Chemistry, Multidisciplinary

The pros and cons of lignin valorisation in an integrated biorefinery

Zea Strassberger et al.

RSC ADVANCES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Development of lignin-based polyurethane thermoplastics

Tomonori Saito et al.

RSC ADVANCES (2013)

Add to Collection

Article Chemistry, Physical

Computational Study of Bond Dissociation Enthalpies for a Large Range of Native and Modified Lignins

Seonah Kim et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)

Add to Collection

Article Chemistry, Physical

Theoretical Study of the Remarkably Diverse Linkages in Lignin

R. Parthasarathi et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)

Add to Collection

Review Engineering, Chemical

A review of separation technologies in current and future biorefineries

Hua-Jiang Huang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.