4.8 Article

Electrochemically enhanced adsorption of organic dyes from aqueous using a freestanding metal-organic frameworks/cellulose-derived porous monolithic carbon foam

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

In-situ development of metal organic frameworks assisted ZnMgAl layered triple hydroxide 2D/2D hybrid as an efficient photocatalyst for organic dye degradation

K. Bhuvaneswari et al.

Summary: A Metal organic framework (MOF) supported layered triple hydroxide (LTH) 2D/2D hybrid material was prepared using a simple hydrothermal method, and its photophysical properties were analyzed through various methods. The degradation efficiency of the MOF-5/LTH hybrid sample was found to be significantly higher, attributed to enhanced visible light absorption and efficient separation and transportation of photoinduced electrons and holes.

CHEMOSPHERE (2021)

Article Chemistry, Physical

Facile preparation of N-doped hierarchically porous carbon derived from pitch-based hyper-cross-linked polymers as an efficient metal-free catalyst for oxygen-reduction

Yue Yang et al.

Summary: Utilizing pitch-based hyper-cross-linked polymers (PHCPs) as carbon precursors, a kind of N-doped hierarchical porous carbon material was successfully prepared as ORR electrocatalysts through a simple ammonia activation process. With an optimized pyrolysis temperature, the material exhibited outstanding ORR performance in alkaline electrolyte, surpassing commercial Pt/C and most non-noble metal electrocatalysts.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Applied

Chitin nanofibers as versatile bio-templates of zeolitic imidazolate frameworks for N-doped hierarchically porous carbon electrodes for supercapacitor

Zhen Shang et al.

Summary: Biobased N-doped hierarchically porous carbon electrodes were prepared using marine crustacean derivatives and chitin nanofibers as templates, showing improved electrochemical performance. The symmetric supercapacitor assembled with these electrodes exhibits enhanced capacitive performance and excellent electrochemical stability.

CARBOHYDRATE POLYMERS (2021)

Article Energy & Fuels

Activated carbon derived from the date palm leaflets as multifunctional electrodes in capacitive deionization system

Htet Htet Kyaw et al.

Summary: Fabricated from date palm leaflets, activated carbon powder was used as electrodes in capacitive deionization system for desalination and dye removal. The AC electrodes showed promising potential for wastewater treatment and environmental remediation.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Engineering, Chemical

A facile synthesis of porous MXene-based freestanding film and its spectacular electrosorption performance for organic dyes

Chenxue Yao et al.

Summary: The study presents a facile and scalable approach to synthesize a porous MXene/single-walled carbon nanotubes film for the electrosorption of organic dyes in wastewater, showing high adsorption capacity and excellent reusability.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Synergistic mediation of polysulfide immobilization and conversion by a catalytic and dual-adsorptive system for high performance lithium-sulfur batteries

Huanhuan Li et al.

Summary: The study presents a 3D aerogel with Co@CoO@N-C/rGO composition for immobilization and conversion of LiPSs in lithium-sulfur batteries, which leads to enhanced electrochemical performance. The dual-shells structure facilitates strong adsorption and transformation of LiPSs, enabling rapid redox kinetics and stable capacity retention after 500 cycles. The kinetic mechanisms, including in situ Raman testing, are also elaborated in detail to support the findings.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Nuclear Science & Technology

Electro-adsorption characteristics and mechanism of Sr2+ ions by capacitive deionization and CFD analysis study

Xiaojing Liu et al.

Summary: The electro-adsorption characteristics and mechanism of Sr2+ ions by capacitive deionization with ACC/GO composite electrode were studied. The removal efficiency of Sr2+ significantly increased with increasing applied voltage, while co-existing ions and initial concentration of Sr2+ solution reduced the removal efficiency. Model analysis showed that the PFO model fits the experimental data better. CFD analysis indicated that suitable flow rate can enhance the efficiency of CDI system.

PROGRESS IN NUCLEAR ENERGY (2021)

Article Engineering, Chemical

A facile and green strategy to synthesize N/P co-doped bio-porous carbon with high yield from fungi residue for efficient VOC adsorption

Hongdi Yu et al.

Summary: This study successfully synthesized N/P co-doped porous carbon from fungi residue using a facile and green strategy, with high adsorption capacity and low production cost. Activation with (NH4)3PO4 showed the highest adsorption capacity compared to other activators, surpassing KOH activated carbon, and demonstrated lower cost in economic analysis.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Electrical & Electronic

Fabrication of hierarchical CuO architectures displaying the (111) facets-enhanced superior fenton-like degradation of organic dyes

Hanmei Hu et al.

Summary: Hierarchical CuO architectures with different (111) facets exposure were successfully fabricated by a microwave-assisted wet chemical method. The Fenton-like catalytic activities of these CuO catalysts were found to be closely related to their preferential (111) facets exposure, with p-CuO demonstrating the highest degradation rate and decoloring efficiency.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Chemistry, Physical

Synthesis of novel Ag@ZIF-67 rhombic dodecahedron for enhanced adsorptive removal of antibiotic and organic dye

Summaira Saghir et al.

Summary: Ag@ZIF-67 was successfully prepared with a beautiful morphology and increased adsorption capacity for MC and MO. Kinetics parameters were determined, and adsorption isotherm models were compared for MC and MO. Ag@ZIF-67 showed to be an efficient adsorbent with higher capacity compared to reported adsorbents.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Physical

One new hexatungstate-based binuclear nickel(II) complex with high selectivity adsorption for organic dyes

Jie Li et al.

Summary: A new hexatungstate compound has been synthesized and characterized, showing high selectivity in adsorbing certain organic dyes and demonstrating potential in treating dye wastewater.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Article Chemistry, Inorganic & Nuclear

Preparation of iron-based metal-organic framework @cellulose aerogel by in situ growth method and its application to dye adsorption

Cong Huang et al.

Summary: Two metal-organic framework materials were loaded on cellulose aerogel by in situ growing method for dye adsorption, showing excellent adsorption capacity. The recovered aerogels maintained comparable adsorption performance even after five cycles of use.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Engineering, Chemical

Fabrication of ZnO/Au@Cu2O heterojunction towards deeply oxidative photodegradation of organic dyes

Xueqin Yuan et al.

Summary: The fabrication of heterojunction structure, such as ZnO/Au@Cu2O, significantly enhances the photocatalytic degradation efficiency of organic dyes, surpassing other catalysts. The heterostructure not only broadens the visible light absorption range, but also promotes efficient charge separation to generate hydroxyl and superoxide radicals.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Construction of two cobalt based bi-functional metal-organic frameworks for enhancing electrocatalytic water oxidation and photocatalytic disposals of hazardous aromatic dyes

Ruixue Wu et al.

Summary: Two novel Co-MOFs, {[Co(tib)(2)(bimb)(2)]·4H(2)O}(n) and {[Co-2(bipa)(4)(bibp)(6)]}(n), constructed from aromatic polycarboxylic acids, have been synthesized under solvothermal conditions. These materials exhibit efficient electrocatalytic and photocatalytic activities, making them promising for oxygen evolution reaction and aromatic dyes degradation.

MOLECULAR CATALYSIS (2021)

Article Environmental Sciences

Enhanced electro-Fenton catalytic performance with in-situ grown Ce/Fe@NPC-GF as self-standing cathode: Fabrication, influence factors and mechanism

Shuying Qiu et al.

Summary: This study demonstrated the efficient removal of sulfamethoxazole using Ce/Fe-nanoporous carbon modified graphite felt electrode in a heterogeneous electro-Fenton system, highlighting the enhanced electrocatalytic activity with Ce doping. The mesoporous Ce/Fe@NPC-GF cathode showed high oxygen reduction activity, low resistance, and remarkable interfacial electron transfer, leading to in-situ H2O2 generation and production of reactive radicals. The electrode exhibited high stability and outstanding catalytic capacity even after 8 cycles, emphasizing its potential as an efficient heterogeneous electro-Fenton cathode material.

CHEMOSPHERE (2021)

Article Environmental Sciences

Exfoliation of 2D materials by saponin in water: Aerogel adsorption/photodegradation organic dye

Yu-Hong Peng et al.

Summary: This study utilized a green method to exfoliate two-dimensional materials and synthesize three-dimensional aerogel composites, demonstrating excellent dye adsorption ability of 94% and dye degradation activity of 80% within 5 minutes.

CHEMOSPHERE (2021)

Article Engineering, Chemical

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Jiaze Weng et al.

Summary: By crosslinking chitosan with glutaraldehyde, a stable three-dimensional network structure was achieved, enhancing the adsorption capacity and ion exchange membrane of the anode in CDI system.

DESALINATION (2021)

Article Electrochemistry

A facile electrosynthesis approach of Mn-Ni-Co ternary phosphides as binder-free active electrode materials for high-performance electrochemical supercapacitors

Amina A. Saleh et al.

Summary: This study demonstrates the fabrication of 3D flower-like ternary metallic manganese-nickel-cobalt phosphides (MNCPs) with superior electrochemical performance, achieving high specific capacity and excellent capacitive retention. Combining the MNCP electrode with bio-derived microporous carbon sheets (MCS) electrode results in exceptional specific capacitance and high specific energy in energy storage applications.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Physical

Constructing macroporous C/Co composites with tunable interfacial polarization toward ultra-broadband microwave absorption

Lei Wang et al.

Summary: By optimizing the surface area value, macroporous C/Co composites with high microwave absorbing performance were successfully fabricated, exhibiting wide effective absorbing bandwidth and low filler loading.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Engineering, Environmental

Honeycomb-like activated carbon with microporous nanosheets structure prepared from waste biomass cork for highly efficient dye wastewater treatment

Qihang Wang et al.

Summary: Cork-activated carbons (CACs) with a unique honeycomb-like structure and ultra-high specific surface area were synthesized for efficient methylene blue (MB) adsorption. CACs exhibited outstanding MB adsorption capacity and reusability compared to other adsorbents.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Materials Science, Multidisciplinary

Multi-functional polyethersulfone nanofibrous membranes with ultra-high adsorption capacity and ultra-fast removal rates for dyes and bacteria

Jianxu Bao et al.

Summary: The study successfully synthesized a novel nanofibrous membrane material for water remediation, which has high adsorption capacity and rate, demonstrating excellent performance in removing dyes and bacteria.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Inorganic & Nuclear

Novel and multifunctional adsorbent fabricated by Zeolitic imidazolate framworks-8 and waste cigarette filters for wastewater treatment: Effective adsorption and photocatalysis

Qingling Zhang et al.

Summary: Waste cellulose/ZIF-8 aerogels, synthesized in this study, exhibit improved thermal stability and specific surface area, making them suitable for water purification with high adsorption capacity and strong photocatalytic activity. Additionally, these aerogels show good recyclability, maintaining degradation rate above 84% after 5 cycles.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Energy & Fuels

Ball milling-assisted synthesis and electrochemical performance of porous carbon with controlled morphology and graphitization degree for supercapacitors

Yibo Wang et al.

Summary: Porous carbons are promising electrode materials for electrical double layer capacitors due to their high surface area and conductivity. A ball milling-assisted method can be used to prepare porous carbons with controlled morphology and graphitization degree, with the amount of FeCl3 center dot 6H(2)O influencing the properties of the porous carbons.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Organic dyes (acid red, fluorescein, methylene blue) and copper(II) adsorption on amino silica spherical particles with tailored surface hydrophobicity and porosity

Inna Melnyk et al.

Summary: Synthesized silica microspheres with tailored properties showed promising potential as high performance sorbents for the removal of organic dyes, with effective adsorption capacities and surface interactions verified through Cu2+ interaction studies. These microspheres can be used as efficient adsorbents for the extraction of copper(II) ions and various dyes, as well as potential fluorescent carriers after dye adsorption.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Chemistry, Inorganic & Nuclear

A hydrolytically stable cage-based metal-organic framework containing two types of building blocks for the adsorption of iodine and dyes

Guang-Qing Wang et al.

Summary: SCNU-Z4 is a metal-organic framework with high adsorption capacity and porous structure, suitable for capturing environmental contaminants, especially in CO2/N2 separation and dye adsorption.

INORGANIC CHEMISTRY FRONTIERS (2021)

Article Engineering, Environmental

Superior dye degradation and adsorption capability of polydopamine modified Fe3O4-pillared bentonite composite

Qurat Ul Ain et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Preparation of pore-size tunable activated carbon derived from waste coffee grounds for high adsorption capacities of organic dyes

Chih-Hao Chiang et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Engineering, Chemical

Mesoporous carbon derived from ZIF-8 for high efficient electrosorption

Tie Gao et al.

DESALINATION (2019)

Article Engineering, Environmental

Adsorption desulfurization performances of Zn/Co porous carbons derived from bimetal-organic frameworks

Quan Huo et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

Electrochemical removal of methylene blue using alginate-modified graphene adsorbents

Ganjar Fadillah et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Environmental Sciences

Electro-enhanced removal of cobalt ions from aqueous solution by capacitive deionization

Xiaojing Liu et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Engineering, Environmental

Electro-removal of arsenic(III) and arsenic(V) from aqueous solutions by capacitive deionization

Chen-Shivan Fan et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Article Chemistry, Physical

Efficient adsorption of organic dyes on a flexible single-wall carbon nanotube film

Jian Luan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Multidisciplinary

Metal-organic framework-derived porous carbon polyhedra for highly efficient capacitive deionization

Yong Liu et al.

CHEMICAL COMMUNICATIONS (2015)