☆ 4.7 Article

Full-scale experimental investigation on progressive failure characteristics of shield segmental lining connected through segmental joints containing ductile-iron joint panels

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Exploring the three-dimensional response of water storage and sewage tunnel based on 3D finite element modeling

Zixin Zhang et al.

Summary: This study investigates the mechanical behavior of staggeredly fabricated water storage and sewage tunnel using 3D finite element modeling. The study finds that the internal force transmission mechanism in the tunnel is beneficial for deformation control and provides recommendations for practical design and construction.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)

Add to Collection

Article Engineering, Civil

Numerical study on transverse deformation characteristics of shield tunnel subject to local soil loosening

Dong Su et al.

Summary: This study establishes a refined numerical model for segmental lining of a shield tunnel and investigates the influence of local soil loosening on the internal force distribution and transverse deformation characteristics of the tunnel. The results show that local soil loosening disturbs force balance, changes constraint conditions, and alters deformation pattern and force state.

UNDERGROUND SPACE (2022)

Add to Collection

Article Engineering, Civil

An analysis model for the temperature and residual stress of tunnel liner exposed to fire

Rujia Qiao et al.

Summary: The study focuses on the temperature and stress analysis of tunnel liner under fire conditions using a thermo-mechanical coupling model. It considers the heat transfer coefficient of the heated surface and validates the theoretical method through comparisons with fire tests, discussing residual stress after a fire. Contributions of the heat transfer coefficient on temperature and stresses of the tunnel liner are quantitatively described, providing a theoretical basis for tunnel fire protection design.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Assessing and controlling of boulder deep-hole blasting-induced vibrations to minimize impacts to a neighboring metro shaft

Zhiqiang Zhang et al.

Summary: This paper proposes vibration reduction measures for deep-hole blasting in boulder, with field tests and numerical models showing that increasing damping and isolation holes, as well as changing blasting layout, can effectively blast boulders while reducing vibration. The use of double row damping holes with specific diameter and spacing results in good vibration reduction effects and economic benefits, ensuring safety within reasonable limits.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Effect of hot-compacted waste nylon fine aggregate on compressive stress-strain behavior of steel fiber-reinforced concrete after exposure to fire: Experiments and optimization

Morteza Tayebi et al.

Summary: This study evaluated the compressive stress-strain performance of fiber-reinforced concrete with upgraded nylon waste before and after heating. Results showed notable degradation in mechanical features of concrete with increased heating temperature, while the addition of steel fibers improved the mechanical properties. Two stress-strain models were proposed to capture the post-heating compressive behavior of concrete, and the response surface method was used to optimize the design parameters for maximizing compressive strength and toughness index of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Post-fire flexural performance and microstructure of steel fiber-reinforced concrete with recycled nylon granules and zeolite substitution

Morteza Tayebi et al.

Summary: Polymer wastes are categorized as highly recyclable materials, and utilizing them in the concrete industry to replace aggregates can reserve natural resources and partly mitigate waste disposal problems. This study investigates the flexural response of steel fiber-reinforced concrete incorporating recycled nylon granules and natural zeolite after exposure to elevated temperatures. The results show that adding natural zeolite to the concrete mixes can improve compressive and flexural strength, as well as flexural stiffness capacity.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Tunnel deformation and stress response under the bilateral foundation pit construction: a case study

Shengyuan Fan et al.

Summary: Through numerical simulation and field observation, this study found that bilateral foundation pit construction can lead to tunnel deformation and stress response. By comparing the deformation and stress changes at different locations, the effectiveness of reinforcement measures was confirmed.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Flexural behavior of segmental joint containing double rows of bolts: Experiment and simulation

Wenqi Ding et al.

Summary: This study investigates the flexural behavior of a new segmental joint containing double rows of bolts through full-scale experimental tests and refined numerical simulations. The joint shows obvious nonlinear characteristics, higher stiffness, and bearing capacity compared to joints with single rows of bolts. The moment-rotational angle curve is divided into three stages, and a tri-fold line stiffness model is proposed to describe the nonlinearity of joint stiffness.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Numerical investigation on the damage and cracking characteristics of the shield tunnel caused by derailed high-speed train

Qixiang Yan et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Construction & Building Technology

Structural behavior of segmental tunnel linings for a large stormwater storage tunnel: Insight from full-scale loading tests

Xin Huang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Analytical

Towards Automated 3D Inspection of Water Leakages in Shield Tunnel Linings Using Mobile Laser Scanning Data

Hongwei Huang et al.

SENSORS (2020)

Add to Collection

Article Engineering, Mechanical

Investigation on deformation behavior and failure mechanism of a segmental ring in shield tunnels based on elaborate numerical simulation

Ren-Peng Chen et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Engineering, Civil

A study of displacements of structures in the vicinity of deep excavation

Monika Mitew-Czajewska

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Condition evaluation of urban metro shield tunnels in Shanghai through multiple indicators multiple causes model combined with multiple regression method

Xueqin Chen et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Article Engineering, Civil

A novel testing setup for determining the flexural properties of tunnel segmental joints: Development and application

Z. X. Zhang et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Energy & Fuels

Identification and Visualization of the Full-Ring Deformation Characteristics of a Large Stormwater Sewage and Storage Tunnel Using Terrestrial Laser Scanning Technology

Zixin Zhang et al.

ENERGIES (2019)

Add to Collection

Article Construction & Building Technology

Experimental testing on ductile-iron joint panels for high-stiffness segmental joints of deep-buried drainage shield tunnels

Long Zhou et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Exploring the three-dimensional response of a water storage and sewage tunnel based on full-scale loading tests

Xin Huang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Robust retrofitting design for rehabilitation of segmental tunnel linings: Using the example of steel plates

Dong-ming Zhang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Numerical-aided design of fiber reinforced concrete tunnel segment joints subjected to seismic loads

Mohammad Jamshidi Avanaki et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Mechanical

Study of the collapse mechanism of shield tunnels due to the failure of segments in sandy ground

Gang Zheng et al.

ENGINEERING FAILURE ANALYSIS (2017)

Add to Collection

Article Construction & Building Technology

Investigation of the structural effect induced by stagger joints in segmental tunnel linings: First results from full-scale ring tests

Xian Liu et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)

Add to Collection

Article Construction & Building Technology

Experimental investigation of the nonlinear behavior of segmental joints in a water-conveyance tunnel

Yuelang Jin et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)

Add to Collection

Article Construction & Building Technology

Ultimate load-carrying capacity of the longitudinal joints in segmental tunnel linings

Xian Liu et al.

STRUCTURAL CONCRETE (2017)

Add to Collection

Article Engineering, Civil

Experimental investigation of the ultimate bearing capacity of continuously jointed segmental tunnel linings

Xian Liu et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2016)

Add to Collection

Article Environmental Sciences

Deep Tunnel for Regulating Combined Sewer Overflow Pollution and Flood Disaster: A Case Study in Guangzhou City, China

Haichun Wu et al.

WATER (2016)

Add to Collection

Article Engineering, Geological

Internal Forces Arising in the Segmental Lining of an Earth Pressure Balance-Bored Tunnel

Emilio Bilotta et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.