☆ 4.7 Article

Spin welding of 3D-printed and solid acrylonitrile-butadiene-styrene (ABS) components: a preliminary investigation

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Modeling ultrasonic welding of polymers using an optimized artificial intelligence model using a gradient-based optimizer

Ammar H. Elsheikh et al.

Summary: A new hybrid artificial intelligence approach is proposed to model the ultrasonic welding of a polymeric material blend. Experimental results show that the proposed ERVFL-GBO model has the highest accuracy compared to other models tested.

WELDING IN THE WORLD (2022)

Add to Collection

Article Polymer Science

A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials

Daniela Fico et al.

Summary: Fused Filament Fabrication (FFF) is a promising additive manufacturing technique, but there are challenges in converting FFF-printed prototypes into functional objects for industrial applications. Scientists are focusing on developing biodegradable green materials to address the issue of waste disposal from non-biodegradable materials.

POLYMERS (2022)

Add to Collection

Review Engineering, Manufacturing

Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review

Haidar Ramazani et al.

Summary: Recently, various additive manufacturing methods have been used to produce metallic objects, with metals being a popular choice due to their superior properties. Metal fused deposition modeling (metal FDM) is a relatively new and cost-effective technique compared to other metal AM methods. This review paper examines the parameters and characteristics of the metal FDM process and discusses the challenges and gaps in manufacturing components with desired characteristics.

PROGRESS IN ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Instruments & Instrumentation

Laser welding of thermoplastics: An overview on lasers, materials, processes and quality

Luis F. F. F. Goncalves et al.

Summary: This paper provides an overview of laser welding techniques for thermoplastic materials, focusing on laser systems, thermoplastic materials, process parameters, and characterization methods. The emphasis is on laser transmission welding, including absorber-based and absorber-free techniques. The review also covers the selection of thermoplastic materials, welding processes, and quality evaluation techniques in laser welding.

INFRARED PHYSICS & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Surface Structuring via Additive Manufacturing to Improve the Performance of Metal and Polymer Joints

Xin Zou et al.

Summary: This study fabricated different structures on TC4 surfaces via electron beam melting method to enhance the joint performance of TC4 titanium alloy and UHMWPE for biomedical applications. Strong direct bonding between UHMWPE and TC4 was achieved, and the interfacial bonding behavior of TC4-UHMWPE joints was further discussed. The importance of combining macro- and micromechanical interlocking for improving metal-polymer joint performance was demonstrated in this study.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing

M. Azadi et al.

Summary: This study investigated the effect of print direction on the high-cycle bending fatigue properties of polymer parts made by FDM 3D printing. Results showed that PLA specimens printed horizontally had better fatigue lifetimes than ABS samples. Factors such as print direction, material, and stress level were found to be statistically significant in influencing fatigue strength.

FORCES IN MECHANICS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials

S. K. Dhinesh et al.

Summary: This article introduces a new type of PLA and ABS blend material that offers higher stress resistance in 3D printing compared to traditional materials. Research results show that the blend materials outperform single ABS and PLA materials in tensile and flexural load tests.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM

K. Sathish Kumar et al.

Summary: This study investigates the effect of FDM infill density on the mechanical properties of PETG and CFPETG samples, showing that a 100% infill density enhances hardness, tensile strength, impact strength, and flexural strength. Subsequent annealing increases interlayer diffusion bonding, further enhancing mechanical properties.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Manufacturing

3D compaction printing of a continuous carbon fiber reinforced thermoplastic

Masahito Ueda et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Review Chemistry, Physical

Friction Stir Welding and Friction Spot Stir Welding Processes of Polymers-State of the Art

Francesco Lambiase et al.

MATERIALS (2020)

Add to Collection

Article Automation & Control Systems

A comparative experimental study of additive manufacturing feasibility faced to injection molding process for polymeric parts

L. C. Paganin et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Review Engineering, Manufacturing

Current status and future directions of fused filament fabrication

Sunpreet Singh et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Mechanical

Investigations on friction stir joining of 3D printed parts to overcome bed size limitation and enhance joint quality for unmanned aircraft systems

Vivek Kumar Tiwary et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Analysis of joint overlap during friction spin welding of plastics

Tarun Bindal et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Engineering, Manufacturing

Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics

Ranvijay Kumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles

Ranvijay Kumar et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Engineering, Multidisciplinary

Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications

Ranvijay Kumar et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Fused Filament Fabrication of Small Ceramic Components

Dorit Noetzel et al.

MATERIALS (2018)

Add to Collection

Review Engineering, Manufacturing

Fused filament fabrication of fiber-reinforced polymers: A review

Bastian Brenken et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Multidisciplinary Sciences

Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating

Charles B. Sweeney et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications

Rupinder Singh et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

Fuda Ning et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Materials Science, Characterization & Testing

Friction weldability of a PA 6 polymer

Mustafa Aydin

MATERIALS TESTING (2015)

Add to Collection

Article Polymer Science

Friction welding of similar materials: Polypropylene, high-density polyethylene, and nylon-6

CB Lin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of solvent and cosolvent on friction welding properties between part of PMMA with PVC

CB Lin et al.

JOURNAL OF MATERIALS SCIENCE (2003)

Add to Collection

Article Engineering, Chemical

Friction welding of similar and dissimilar materials: PMMA and PVC

CB Lin et al.

POLYMER ENGINEERING AND SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.