4.7 Article

Thermal energy evolution and mechanical deformation of monocrystalline yttria-stabilized zirconia nanoparticles in aerosol deposition processes

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Experimental and atomistic study of high speed collisions of gold nanoparticles with a gold substrate: Validation of interatomic potentials

Alexander Plack et al.

Summary: The study investigates the coefficient of restitution and critical velocity of collision between gold nanoparticles and a non-rigid gold substrate through molecular dynamics simulations and experiments. Results indicate that the ReaxFF potential can most accurately reproduce experimentally determined critical rebound velocity, while also providing insights into sticking probability and material transfer.

JOURNAL OF AEROSOL SCIENCE (2022)

Article Materials Science, Coatings & Films

Influence of Process Parameters on the Aerosol Deposition (AD) of Yttria-Stabilized Zirconia Particles

Tarini Prasad Mishra et al.

Summary: Aerosol deposition is a novel method for fabricating oxide films at room temperature, with the study of different processing parameters and their influence on the properties of the deposited layer. The research identified the window of carrier gas flow for successful deposition and systematically investigated the effects of carrier gas flow, substrate materials, and carrier gas species on coating properties.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Article Engineering, Chemical

Dissipation and adhesion in collisions between amorphous FeO nanoparticles

Baochi D. Doan et al.

Summary: Experimental observations show that micron-sized dust grains exhibit adhesion in collisions, but larger aggregates exhibit fragmentation or bouncing. Weak adhesion between dust particles in aggregates is a key factor leading to this phenomenon.

JOURNAL OF AEROSOL SCIENCE (2021)

Article Chemistry, Physical

Molecular simulation of high-velocity deposition of titanium dioxide nanoparticles on titanium

Hesamodin Jami et al.

Summary: Aerosol deposition method is a new room temperature coating technique that offers advantages compared to conventional methods. Molecular dynamics simulations are used to optimize material and process parameters, revealing the underlying physical processes involved in the formation and bonding of ceramic films. The simulations show high energy impact leading to unusual elastic-plastic deformation of ceramic nanoparticles and bonding mechanisms at the atomic scale.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Spray Pyrolysis-Aerosol Deposition for the Production of Thick Yttria-Stabilized Zirconia Coatings

Guanyu Song et al.

Summary: Aerosol deposition (AD) is a coating technique where particles are impacted onto a substrate at reduced pressures, leading to consolidation. By synthesizing particles in the gas phase, size-controlled ceramic particles can be injected into AD systems, eliminating the need for aerosolization. The combined use of ultrasonic spray pyrolysis (USP) and AD results in thick yttria-stabilized zirconia (YSZ) coatings with high thermal conductivities.

ADVANCED ENGINEERING MATERIALS (2021)

Article Engineering, Chemical

An insight into the temperature-dependent sintering mechanisms of metal nanoparticles through MD-based microstructural analysis

Abolfazl Malti et al.

Summary: The study reveals a reverse correlation between solidification time and amorphous content, with the process controlled by dislocation slip at temperatures from 600-1000 K and by surface diffusion and thermal twinning beyond 1000 K. Optimal parameters are identified as a combination of dislocation slip and surface diffusion at 1000 K with 100 ps sintering. Temperature-dependent MSD diagrams are monitored for a detailed analysis of sintering dynamics.

POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

Fragmentation and film growth in supersonic nanoaggregate aerosol deposition

Souvik Ghosh et al.

AICHE JOURNAL (2020)

Article Materials Science, Coatings & Films

Effect of Deposition Rate and Deposition Temperature on Residual Stress of HVOF-Sprayed Coatings

Alfredo Valarezo et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)

Article Materials Science, Coatings & Films

Effect of particle shape on mechanics of impact in the deposition of titanium nanoparticles on a titanium substrate

Hesamodin Jami et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Ceramics

How to treat powders for the room temperature aerosol deposition method to avoid porous, low strength ceramic films

Joerg Exner et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Thermodynamics

Mass, momentum, and energy transfer in supersonic aerosol deposition processes

Chenxi Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Physics, Applied

An experimental and computational study of high speed two-particle impacts of Ag nanoparticles

T. V. Chitrakar et al.

JOURNAL OF APPLIED PHYSICS (2019)

Article Materials Science, Multidisciplinary

In- and through-plane conductivity of 8YSZ films produced at room temperature by aerosol deposition

Joerg Exner et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Chemistry, Physical

Unravelling ultrafast deformation mechanisms in surface deposition of titanium nanoparticles

Hesamodin Jami et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Applied

Alloyed Thermoelectric PbTe-SnTe Films Formed via Aerosol Deposition

Jesse M. Adamczyk et al.

ACS COMBINATORIAL SCIENCE (2019)

Article Materials Science, Multidisciplinary

Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying

Shuo Yin et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Physical

Excess thermal energy and latent heat in nanocluster collisional growth

Huan Yang et al.

JOURNAL OF CHEMICAL PHYSICS (2019)

Article Chemistry, Physical

An effective partial charge model for bulk and surface properties of cubic ZrO2, Y2O3 and yttrium-stabilised zirconia

Thomas S. Hofer et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Article Chemistry, Physical

Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings

Jinshuang Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Multidisciplinary Sciences

High temperature deformability of ductile flash-sintered ceramics via in-situ compression

Jaehun Cho et al.

NATURE COMMUNICATIONS (2018)

Article Multidisciplinary Sciences

Melt-driven erosion in microparticle impact

Mostafa Hassani-Gangaraj et al.

NATURE COMMUNICATIONS (2018)

Article Materials Science, Ceramics

Low thermal conductivity of atomic layer deposition yttria-stabilized zirconia (YSZ) thin films for thermal insulation applications

Jungwan Cho et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Article Physics, Multidisciplinary

Melting Can Hinder Impact-Induced Adhesion

Mostafa Hassani-Gangaraj et al.

PHYSICAL REVIEW LETTERS (2017)

Article Materials Science, Coatings & Films

Combustion Flame Spray of CoNiCrAlY & YSZ coatings

F. Fanicchia et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Multidisciplinary

Particle deposition and deformation from high speed impaction of Ag nanoparticles

T. V. Chitrakar et al.

ACTA MATERIALIA (2017)

Article Engineering, Chemical

Powder requirements for aerosol deposition of alumina films

Joerg Exner et al.

ADVANCED POWDER TECHNOLOGY (2015)

Article Materials Science, Coatings & Films

Large scale Molecular Dynamics simulation of microstructure formation during thermal spraying of pure copper

Tao Wang et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Article Materials Science, Ceramics

Gadolinium Zirconate/YSZ Thermal Barrier Coatings: Plasma Spraying, Microstructure, and Thermal Cycling Behavior

Emine Bakan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Chemistry, Multidisciplinary

The dynamic effect on mechanical contacts between nanoparticles

Weifu Sun

NANOSCALE (2013)

Article Materials Science, Ceramics

Microstructural evolution of YSZ electrolyte aerosol-deposited on porous NiO-YSZ

Jong-Jin Choi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Engineering, Chemical

Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition

M. W. Lee et al.

JOURNAL OF AEROSOL SCIENCE (2011)

Article Chemistry, Physical

Interface proximity effects on ionic conductivity in nanoscale oxide-ion conducting yttria stabilized zirconia: An atomistic simulation study

Subramanian K. R. S. Sankaranarayanan et al.

JOURNAL OF CHEMICAL PHYSICS (2011)

Article Chemistry, Physical

Oxidation behavior of ferritic steel alloy coated with LSM-YSZ composite ceramics by aerosol deposition

Jong-Jin Choi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Materials Science, Ceramics

Thermal conductivities of YSZ/Al2O3 composites

Fan Yang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Article Materials Science, Multidisciplinary

Bonding features and associated mechanisms in kinetic sprayed titanium coatings

Gyuyeol Bae et al.

ACTA MATERIALIA (2009)

Article Chemistry, Physical

Staggered Mesh Ewald: An Extension of the Smooth Particle-Mesh Ewald Method Adding Great Versatility

David S. Cerutti et al.

JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2009)

Article Materials Science, Multidisciplinary

Atomistic simulation of the aerosol deposition method with zirconia nanoparticles

Hiroshi Ogawa

MATERIALS TRANSACTIONS (2006)

Article Materials Science, Ceramics

Aerosol deposition of ceramic thick films at room temperature: Densification mechanism of ceramic layers

Jun Akedo

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Materials Science, Coatings & Films

Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings - Case study for Ni-Al

S Deshpande et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Article Materials Science, Ceramics

Mechanism of thermal transport in zirconia and yttria-stabilized zirconia by molecular-dynamics simulation

PK Schelling et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)

Article Materials Science, Multidisciplinary

Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings

A Rabiei et al.

ACTA MATERIALIA (2000)