4.8 Article

Dynamic analysis of a CCHP system based on fuel cells integrated with methanol-reforming and dehumidification for data centers

Related references

Note: Only part of the references are listed.
Review Thermodynamics

Solid desiccant-based dehumidification systems: A critical review on configurations, techniques, and current trends

Mahmoud M. Abd-Elhady et al.

Summary: Desiccant dehumidification systems have the advantage of utilizing low-grade heat sources and reducing greenhouse gas emissions, but are limited by high capital costs and low efficiency. Improving performance, reliability, and reducing costs are necessary to enhance commercial competitiveness in the market.

INTERNATIONAL JOURNAL OF REFRIGERATION (2022)

Article Thermodynamics

4E analysis and three-objective optimization for selection of the best prime mover in smart energy systems for residential applications: a comparison of four different scenarios

Ehsan Gholamian et al.

Summary: This study focuses on the proposal, techno-economic analysis, and optimization of the best prime mover for a residential scale combined cooling, heating, and power generation system (CCHP). The hybrid SOFC/GT system showed higher exergy efficiency and optimal performance among other case studies.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Energy & Fuels

Integrated energy systems with CCHP and hydrogen supply: A new outlet for curtailed wind power

Nan Li et al.

Summary: The new energy system proposed in the paper integrates hydrogen production and distribution system with the combined cooling, heating and power (CCHP) system, addressing the challenges of power system's stability and reducing carbon emissions in the transport sector simultaneously.

APPLIED ENERGY (2021)

Review Energy & Fuels

Effects of temperature on the performance of fuel cell hybrid electric vehicles: A review

Zhen Song et al.

Summary: Fuel cell hybrid electric vehicles, powered by both fuel cell and lithium-ion battery, have been recognized as a potential alternative to internal combustion vehicles due to their high energy density and conversion efficiency. Energy management and thermal management are critical for stable power output, and strategies integrating temperature effects are crucial for improving efficiency and service life.

APPLIED ENERGY (2021)

Article Thermodynamics

Performance analysis of a solid desiccant cooling system for a residential air conditioning system

Yulho Lee et al.

Summary: Desiccant cooling systems, when combined with distributed power generations, can significantly reduce electricity consumption but have limited cooling capacity. Hybrid desiccant cooling systems, combined with electric heat pumps, can extend cooling capacity to meet the cooling load on the hottest day in summer.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Performance analysis of a cascade lithium bromide absorption refrigeration/dehumidification process driven by low-grade waste heat for hot summer and cold winter climate area in China

Aixiang Xu et al.

Summary: A novel cascade lithium bromide absorption refrigeration/dehumidification system is developed to recover low-grade waste heat in China, with potential for reducing energy consumption in hot summer and cold winter climates.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Mathematical modeling of hydrogen production using methanol steam reforming in the coupled membrane reactor when the output materials of the reformer section is used as feed for the combustion section

Mohammad Reza Talaghat et al.

Summary: This study models hydrogen production in coupled membrane reactors using different methods, showing that the conversion of methanol varies depending on the feed used in the combustion section. The research also explores the impact of different parameters on methanol conversion rate.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Construction & Building Technology

Investigation on indirect evaporative cooling system integrated with liquid dehumidification

Hongkuan Zhang et al.

Summary: A novel device integrating IEC technology and liquid dehumidification technology was developed and shown to achieve higher dehumidification rate and heat flux under different conditions. The performance of this device was found to be superior in hot and humid climates compared to traditional IEC systems.

ENERGY AND BUILDINGS (2021)

Review Energy & Fuels

IS Thermal management of polymer electrolyte membrane fuel cells: A review of cooling methods, material properties, and durability

Qin Chen et al.

Summary: This review summarized recent progress in thermal management of Proton Exchange Membrane (PEM) fuel cells, focusing on waste heat generation mechanisms, cooling methods, cold starts, material properties, and durability. The challenge of cooling PEM fuel cell stacks and coupling thermal and water managements is discussed, along with proposed future directions for research.

APPLIED ENERGY (2021)

Article Thermodynamics

Experimental investigation on a dehumidification unit with heat recovery using desiccant coated heat exchanger in waste to energy system

X. Y. Sun et al.

Summary: A desiccant dehumidification unit driven by waste heat from gasification system has been developed to improve energy utilization. Under typical outdoor conditions in Singapore, the system achieves good dehumidification performance and significantly increases both the thermal COP and waste heat utilization ratio.

APPLIED THERMAL ENGINEERING (2021)

Review Energy & Fuels

Recent development of hydrogen and fuel cell technologies: A review

Lixin Fan et al.

Summary: Summary: Hydrogen has emerged as a new energy vector, beyond its industrial role, to address energy security issues in developed countries. China is actively developing hydrogen infrastructure to meet sustainability goals and growing energy demand.

ENERGY REPORTS (2021)

Article Thermodynamics

Improved butterfly optimization algorithm for CCHP driven by PEMFC

Yuan Zhi et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Thermodynamic modeling and analysis of a novel PEMFC-ORC combined power system

Guokun Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Computer Science, Interdisciplinary Applications

Free open reference implementation of a two-phase PEM fuel cell model

Roman Vetter et al.

COMPUTER PHYSICS COMMUNICATIONS (2019)

Article Thermodynamics

Robust optimization based optimal chiller loading under cooling demand uncertainty

Mohammadhossein Saeedi et al.

APPLIED THERMAL ENGINEERING (2019)

Article Green & Sustainable Science & Technology

Optimal offering and bidding strategies of renewable energy based large consumer using a novel hybrid robust-stochastic approach

Oveis Abedinia et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Engineering, Electrical & Electronic

Different states of multi-block based forecast engine for price and load prediction

Wei Gao et al.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2019)

Article Green & Sustainable Science & Technology

A simulation study on heat recovery of data center: A case study in Harbin, China

Jiawen Yu et al.

RENEWABLE ENERGY (2019)

Article Construction & Building Technology

Dynamic modeling of an eco-neighborhood integrated micro-CHP based on PEMFC: Performance and economic analyses

Jaouher Romdhane et al.

ENERGY AND BUILDINGS (2018)

Article Chemistry, Physical

Energy assessment of PEMFC based MCCHP with absorption chiller for small scale French residential application

Jaouher Romdhane et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Feedforward fuzzy-PID control for air flow regulation of PEM fuel cell system

Kai Ou et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Performance analysis of 5 kW PEMFC-based residential micro-CCHP with absorption chiller

Xi Chen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

Validation of genetic algorithm results in a fuel cell model

Markku Ohenoja et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Energy & Fuels

Modeling and Dynamic Characteristic Simulation of a Proton Exchange Membrane Fuel Cell

J. Jia et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2009)

Article Thermodynamics

A new cycle time allocation for enhancing the performance of two-bed adsorption chillers

T. Miyazaki et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2009)

Article Engineering, Chemical

Kinetics of the preferential oxidation of CO over CuO/CeO2 catalysts in H2-rich gases

Tiziana Caputo et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)

Article Construction & Building Technology

Modeling and simulation of desiccant wheel for air conditioning

Fatemeh Esfandiari Nia et al.

ENERGY AND BUILDINGS (2006)