Related references
Note: Only part of the references are listed.Experimental validation for enhancement of PEMFC cold start performance: Based on the optimization of micro porous layer
Rui Lin et al.
APPLIED ENERGY (2021)
Trifunctional Co nanoparticle confined in defect-rich nitrogen-doped graphene for rechargeable Zn-air battery with a long lifetime
Ansheng Wang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2021)
Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack
Tiankuo Chu et al.
ENERGY (2021)
Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): A review
Junjie Zhao et al.
JOURNAL OF POWER SOURCES (2021)
Optimization of catalyst layer thickness for achieving high performance and low cost of high temperature proton exchange membrane fuel cell
Lingchao Xia et al.
APPLIED ENERGY (2021)
Activity and degradation study of an Fe-N-C catalyst for ORR in Direct Methanol Fuel Cell (DMFC)
Ioanna Martinaiou et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Iron-nitrogen doped carbon with exclusive presence of FexN active sites as an efficient ORR electrocatalyst for Zn-air battery
Xiao Hu et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Study on the performance of proton exchange membrane fuel cell (PEMFC) with dead-ended anode in gravity environment
Shihua Liu et al.
APPLIED ENERGY (2020)
Low temperature durability and consistency analysis of proton exchange membrane fuel cell stack based on comprehensive characterizations
Di Zhong et al.
APPLIED ENERGY (2020)
Mass Transfer in a Co/N/C Catalyst Layer for the Anion Exchange Membrane Fuel Cell
Weikang Zhu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
A scaled-up proton exchange membrane fuel cell with enhanced performance and durability
Samaneh Shahgaldi et al.
APPLIED ENERGY (2020)
Improved water management by alternating air flow directions in a proton exchange membrane fuel cell stack
Lizhong Luo et al.
JOURNAL OF POWER SOURCES (2020)
Co-generation of electricity and olefin via proton conducting fuel cells using (Pr0.3Sr0.7)0.9Ni0.1Ti0.9O3 catalyst layers
Nai Shi et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Low-loading IrO2 supported on Pt for catalysis of PEM water electrolysis and regenerative fuel cells
Ahyoun Lim et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2020)
Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems
Zhiyang Liu et al.
APPLIED ENERGY (2020)
Performance degradation of 1 kW proton exchange membrane fuel cell stack using graphitized carbon supported Pt nanoparticle catalyst
Fengwen Pan et al.
JOURNAL OF POWER SOURCES (2020)
Investigation of the assembly for high-power proton exchange membrane fuel cell stacks through an efficient equivalent model
Zihan Zhou et al.
APPLIED ENERGY (2020)
Pore-scale modeling of oxygen transport in the catalyst layer of air-breathing cathode in membraneless microfluidic fuel cells
Ya-Lu Fu et al.
APPLIED ENERGY (2020)
Modeling of the effects of cathode catalyst layer design parameters on performance of polymer electrolyte membrane fuel cell
Pu He et al.
APPLIED ENERGY (2020)
Mesoporous carbon confined intermetallic nanoparticles as highly durable electrocatalysts for the oxygen reduction reaction
Weiyue Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Effect of contaminant mixtures in air on proton exchange membrane fuel cell performance
Jing Qi et al.
JOURNAL OF POWER SOURCES (2019)
Consistency analysis of polymer electrolyte membrane fuel cell stack during cold start
Rui Lin et al.
APPLIED ENERGY (2019)
A novel diagnostic methodology for fuel cell stack health: Performance, consistency and uniformity
Zunyan Hu et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Poisoning of proton exchange membrane fuel cells by contaminants and impurities: Review of mechanisms, effects, and mitigation strategies
B. Shabani et al.
JOURNAL OF POWER SOURCES (2019)
Enhancement of output power density and performance of direct borohydride-hydrogen peroxide fuel cell using Ni-Pd core-shell nanoparticles on polymeric composite supports (rGO-PANI) as novel electrocatalysts
Raana Mahmoodi et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2019)
Pore-scale and multiscale study of effects of Pt degradation on reactive transport processes in proton exchange membrane fuel cells
Ruiyuan Zhang et al.
APPLIED ENERGY (2019)
ZIF derived PtNiCo/NC cathode catalyst for proton exchange membrane fuel cell
Saadia Hanif et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2019)
Mesoscopic modeling of transport resistances in a polymer-electrolyte fuel-cell catalyst layer: Analysis of hydrogen limiting currents
Yu-Tong Mu et al.
APPLIED ENERGY (2019)
Trifunctional Self-Supporting Cobalt-Embedded Carbon Nanotube Films for ORR, OER, and HER Triggered by Solid Diffusion from Bulk Metal
Zhengkun Yang et al.
ADVANCED MATERIALS (2019)
Real-time imaging of activation and degradation of carbon supported octahedral Pt-Ni alloy fuel cell catalysts at the nanoscale using in situ electrochemical liquid cell STEM
Vera Beermann et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Enhancing fuel cell catalyst layer stability using a dual-function sulfonated silica-based ionomer
Reza Alipour Moghadam Esfahani et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Improved methods to measure hydrogen crossover current in proton exchange membrane fuel cell
Pucheng Pei et al.
APPLIED ENERGY (2018)
A hydrothermal approach to access active and durable sulfonated silica-ceramic carbon electrodes for PEM fuel cell applications
Reza Alipour Moghadam Esfahani et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
An opinion on catalyst degradation mechanisms during catalyst support focused accelerated stress test (AST) for proton exchange membrane fuel cells (PEMFCs)
Raghunandan Sharma et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Preparation, characterization, and electrochemical properties investigation of recycled proton exchange membrane for fuel cell applications
Jafar Alipour Moghaddam et al.
ENERGY (2018)
A multipoint voltage-monitoring method for fuel cell inconsistency analysis
Zunyan Hu et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Insights into the role of wettability in cathode catalyst layer of proton exchange membrane fuel cell; pore scale immiscible flow and transport processes
H. Fathi et al.
JOURNAL OF POWER SOURCES (2017)
Modifying Commercial Carbon with Trace Amounts of ZIF to Prepare Derivatives with Superior ORR Activities
Bing Ni et al.
ADVANCED MATERIALS (2017)
In Situ Exfoliated, Edge-Rich, Oxygen-Functionalized Graphene from Carbon Fibers for Oxygen Electrocatalysis
Zhijuan Liu et al.
ADVANCED MATERIALS (2017)
System integration, durability and reliability of fuel cells: Challenges and solutions
Junye Wang
APPLIED ENERGY (2017)
Carbon corrosion and performance degradation mechanism in a proton exchange membrane fuel cell with dead-ended anode and cathode
Ben Chen et al.
ENERGY (2016)
Study of hydrogen crossover and proton conductivity of self-humidifying nanocomposite proton exchange membrane based on sulfonated poly (ether ether ketone)
Parvin Sayadi et al.
ENERGY (2016)
A pseudo-3D model to investigate heat and water transport in large area PEM fuel cells - Part 2: Application on an automotive driving cycle
F. Nandjou et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Local resolved investigation of PEMFC performance degradation mechanism during dynamic driving cycle
Jing Shan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
The durability of carbon supported Pt nanowire as novel cathode catalyst for a 1.5 kW PEMFC stack
Bing Li et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2015)
Lifetime prediction and the economic lifetime of Proton Exchange Membrane fuel cells
Huicui Chen et al.
APPLIED ENERGY (2015)
Operation characteristics and carbon corrosion of PEMFC (Proton exchange membrane fuel cell) with dead-ended anode for high hydrogen utilization
Ben Chen et al.
ENERGY (2015)
Study of the degradation mechanisms of carbon-supported platinum fuel cells catalyst via different accelerated stress test
Yuanliang Zhang et al.
JOURNAL OF POWER SOURCES (2015)
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Steven Holdcroft
CHEMISTRY OF MATERIALS (2014)
The degradation study of Nafion/PTFE composite membrane in PEM fuel cell under accelerated stress tests
Bingbing Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Measurement of capillary pressure in fuel cell diffusion media, micro-porous layers, catalyst layers, and interfaces
Jacob M. LaManna et al.
JOURNAL OF POWER SOURCES (2014)
Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells
C. Lim et al.
JOURNAL OF POWER SOURCES (2014)
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
Jinfeng Wu et al.
JOURNAL OF POWER SOURCES (2008)
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
Qiangu Yan et al.
JOURNAL OF POWER SOURCES (2006)
Gas crossover and membrane degradation in polymer electrolyte fuel cells
Minoru Inaba et al.
ELECTROCHIMICA ACTA (2006)