Related references
Note: Only part of the references are listed.Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Kaveh Edalati et al.
MATERIALS RESEARCH LETTERS (2022)
Evaluating the paradox of strength and ductility in ultrafine-grained oxygen-free copper processed by ECAP at room temperature
Meshal Y. Alawadhi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Inhibiting stress corrosion cracking by removing corrosion products from the Mg-Zn-Zr alloy pre-exposed to corrosion solutions
Evgeniy Merson et al.
ACTA MATERIALIA (2021)
Precipitation in nanostructured alloys: A brief review
Kaka Ma et al.
MRS BULLETIN (2021)
Stability of nanocrystalline metals: The role of grain-boundary chemistry and structure
Christopher A. Schuh et al.
MRS BULLETIN (2021)
Commercialization of bulk nanostructured metals and alloys
Terry C. Lowe et al.
MRS BULLETIN (2021)
Ultralow-temperature superplasticity and its novel mechanism in ultrafine-grained Al alloys
Nguyen Q. Chinh et al.
MATERIALS RESEARCH LETTERS (2021)
Development of nanostructured titanium implants for biomedical implants-A short review
Ravisankar Balasubramanian et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Influence of ultra-fine grain structure on corrosion behaviour of biodegradable Mg-1Ca alloy
E. V. Parfenov et al.
CORROSION SCIENCE (2020)
Biofunctionalization of PEO coatings on titanium implants with inorganic and organic substances
Evgeny Parfenov et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Severe Plastic Deformation for Nanostructure Controls
Zenji Horita et al.
MATERIALS TRANSACTIONS (2020)
Grain refinement, texture, and mechanical properties of a magnesium alloy after radial-shear rolling
S. Dobatkin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Strength enhancement induced by grain boundary solute segregations in ultrafine-grained alloys
S. Bobylev et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Developing Nanostructured Metals for Manufacturing of Medical Implants with Improved Design and Biofunctionality
Ruslan Z. Valiev et al.
MATERIALS TRANSACTIONS (2019)
An Overview on the Continuous Severe Plastic Deformation Methods
Ghader Faraji et al.
MATERIALS TRANSACTIONS (2019)
Grain Boundaries and Diffusion Phenomena in Severely Deformed Materials
Gerhard Wilde et al.
MATERIALS TRANSACTIONS (2019)
Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
O. Renk et al.
MATERIALS TRANSACTIONS (2019)
The alpha -> omega and beta -> omega phase transformations in Ti-Fe alloys under high-pressure torsion
A. R. Kilmametov et al.
ACTA MATERIALIA (2018)
Review on superior strength and enhanced ductility of metallic nanomaterials
I. A. Ovid'ko et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Transition from poor ductility to room-temperature superplasticity in a nanostructured aluminum alloy
Kaveh Edalati et al.
SCIENTIFIC REPORTS (2018)
Peculiarities of Interactions of Alloying Elements with Grain Boundaries and the Formation of Segregations in Al-Mg and Al-Zn Alloys
M. V. Petrik et al.
PHYSICS OF METALS AND METALLOGRAPHY (2018)
Phase transitions in Cu-based alloys under high pressure torsion
B. B. Straumal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Transformations of α′ martensite in Ti-Fe alloys under high pressure torsion
A. Kilmametov et al.
SCRIPTA MATERIALIA (2017)
High-pressure torsion driven phase transformations in Cu-Al-Ni shape memory alloys
B. B. Straumal et al.
ACTA MATERIALIA (2017)
Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion
B. B. Straumal et al.
ACTA MATERIALIA (2017)
Deformation of Pure Aluminum Along the Groove Path of ECAP-Conform Process
Vahid Ayati et al.
ADVANCED ENGINEERING MATERIALS (2016)
Review: grain boundary faceting-roughening phenomena
B. B. Straumal et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures
Praveen Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Nanostructured Al and Cu alloys with superior strength and electrical conductivity
M. Yu Murashkin et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Fundamentals of Superior Properties in Bulk NanoSPD Materials
R. Z. Valiev et al.
MATERIALS RESEARCH LETTERS (2016)
Nanostructured Titanium for Maxillofacial Mini-Implants
Irina P. Semenova et al.
ADVANCED ENGINEERING MATERIALS (2016)
Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later
Ruslan Z. Valiev et al.
JOM (2016)
In vitro and in vivo studies of ultrafine-grain Ti as dental implant material processed by ECAP
Baili An et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
High Pressure Torsion Extrusion as a new severe plastic deformation process
Yu. Ivanisenko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
A review on high-pressure torsion (HPT) from 1935 to 1988
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The Strength-Grain Size Relationship in Ultrafine-Grained Metals
N. Balasubramanian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Two-Level Micro-to-Nanoscale Hierarchical TiO2 Nanolayers on Titanium Surface
Elena G. Zemtsova et al.
MATERIALS (2016)
Recent Advances in Processing and Application of Nanostructured Titanium for Dental Implants
Alexander V. Polyakov et al.
ADVANCED ENGINEERING MATERIALS (2015)
Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy
A. A. C. Asselli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Phase transitions induced by severe plastic deformation: steady-state and equifinality
Boris B. Straumal et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2015)
Calcium orthophosphate deposits: Preparation, properties and biomedical applications
Sergey V. Dorozhkin
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper
A. Hohenwarter
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The role of microstructure and texture in controlling mechanical properties of AZ31B magnesium alloy processed by I-ECAP
Michal Gzyl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Formation of Micro- and Nanostructures on the Nanotitanium Surface by Chemical Etching and Deposition of Titania Films by Atomic Layer Deposition (ALD)
Denis V. Nazarov et al.
MATERIALS (2015)
Enhanced Mechanical Properties and Electrical Conductivity in Ultrafine-Grained Al 6101 Alloy Processed via ECAP-Conform
Maxim Murashkin et al.
METALS (2015)
Cell Response to Nanocrystallized Metallic Substrates Obtained through Severe Plastic Deformation
Sara Bagherifard et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Fatigue Life and Failure Characteristics of an Ultrafine-Grained Ti-6Al-4V Alloy Processed by ECAP and Extrusion
Alexander V. Polyakov et al.
ADVANCED ENGINEERING MATERIALS (2014)
Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces
D. Raabe et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Bioactive Coatings for Orthopaedic Implants-Recent Trends in Development of Implant Coatings
Bill G. X. Zhang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Hydrogen storage properties of pure Mg after the combined processes of ECAP and cold-rolling
G. F. Lima et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Nanostructured Cu-Cr alloy with high strength and electrical conductivity
R. K. Islamgaliev et al.
JOURNAL OF APPLIED PHYSICS (2014)
Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications
Ehsan Mostaed et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel
M. M. Abramova et al.
MATERIALS LETTERS (2014)
Production of hydroxyapatite layers on the plasma electrolytically oxidized surface of titanium alloys
Alex Lugovskoy et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Biodegradable metals
Y. F. Zheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Nanostructured titanium-based materials for medical implants: Modeling and development
Leon Mishnaevsky et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Progress of biodegradable metals
Huafang Li et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)
A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
R. Z. Valiev et al.
SCRIPTA MATERIALIA (2014)
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
Terence G. Langdon
ACTA MATERIALIA (2013)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Generation of metallic nanocomposites by severe plastic deformation
A. Bachmaier et al.
INTERNATIONAL MATERIALS REVIEWS (2013)
In vitro and in vivo studies on nanocrystalline Ti fabricated by equal channel angular pressing with microcrystalline CP Ti as control
F. L. Nie et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Biodegradable magnesium implants for orthopedic applications
Hazibullah Waizy et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Regulation of the behaviors of mesenchymal stem cells by surface nanostructured titanium
Min Lai et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2012)
Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: A general review
Jiali Wang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Continuous high-pressure torsion using wires
Kaveh Edalati et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Microstructure and microtexture evolution in pure metals after ultra-high straining
Alexander P. Zhilyaev et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling
Vitor L. Sordi et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Effect of cold rolling on microstructure and mechanical properties of copper subjected to ECAP with various numbers of passes
N. D. Stepanov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena
X. Sauvage et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation
P. Zhang et al.
SCRIPTA MATERIALIA (2012)
Accelerated stem cell attachment to ultrafine grained titanium
Yuri Estrin et al.
ACTA BIOMATERIALIA (2011)
Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing
Sergiy V. Divinski et al.
ACTA MATERIALIA (2011)
Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion
S. Scheriau et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route
I. Sabirov et al.
SCRIPTA MATERIALIA (2011)
Segregation of solute elements at grain boundaries in an ultrafine grained Al-Zn-Mg-Cu alloy
Gang Sha et al.
ULTRAMICROSCOPY (2011)
Synthesis and properties of hydroxyapatite-containing porous titania coating on ultrafine-grained titanium by micro-arc oxidation
Z. Q. Yao et al.
ACTA BIOMATERIALIA (2010)
ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: Microstructure
P. W. J. Mckenzie et al.
ACTA MATERIALIA (2010)
Principles of ECAP-Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy
Cheng Xu et al.
ACTA MATERIALIA (2010)
Continuous high-pressure torsion
Kaveh Edalati et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Processing of nanostructured metals and alloys via plastic deformation
Yuntian Zhu et al.
MRS BULLETIN (2010)
On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation
R. Z. Valiev et al.
SCRIPTA MATERIALIA (2010)
Nanostructural hierarchy increases the strength of aluminium alloys
Peter V. Liddicoat et al.
NATURE COMMUNICATIONS (2010)
Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography
Jin-Woo Park et al.
ACTA BIOMATERIALIA (2009)
Using ring samples to evaluate the processing characteristics in high-pressure torsion
Yosuke Harai et al.
ACTA MATERIALIA (2009)
An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing
Gang Sha et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
Accelerated growth of preosteoblastic cells on ultrafine grained titanium
Y. Estrin et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
A look at physical simulation of metallurgical processes, past, present and future
D. Ferguson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation
Zhiguo Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Grain Refinement and Mechanical Behavior of the Al Alloy, Subjected to the New SPD Technique
Ruslan Z. Valiev et al.
MATERIALS TRANSACTIONS (2009)
Scaling-Up of High Pressure Torsion Using Ring Shape
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2009)
Development of High-Pressure Sliding Process for Microstructural Refinement of Rectangular Metallic Sheets
Tadayoshi Fujioka et al.
MATERIALS TRANSACTIONS (2009)
Strength of nanostructures
R. A. Andrievski et al.
PHYSICS-USPEKHI (2009)
Texture evolution in equal-channel angular extrusion
Irene J. Beyerlein et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Nanostructured titanium for biomedical applications
Ruslan Z. Valiev et al.
ADVANCED ENGINEERING MATERIALS (2008)
Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion
N. Lugo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Nanostructure and related mechanical properties of an Al-Mg-Si alloy processed by severe plastic deformation
Gulnaz Nurislamova et al.
PHILOSOPHICAL MAGAZINE LETTERS (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
In vitro fibroblast response to ultra fine grained titanium produced by a severe plastic deformation process
Taik Nam Kim et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation
S. Cheng et al.
ACTA MATERIALIA (2007)
Nanostructuring of a titanium material by high-pressure torsion improves pre-osteoblast attachment
Shahab Faghihi et al.
ADVANCED MATERIALS (2007)
Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper
Yong-Hao Zhao et al.
ADVANCED MATERIALS (2006)
Producing bulk ultrafine-grained materials by severe plastic deformation
RZ Valiev et al.
JOM (2006)
Continuous processing of ultrafine grained Al by ECAP-Conform
GJ Raab et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructuring of metals by severe plastic deformation for advanced properties
R Valiev
NATURE MATERIALS (2004)
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
XY Liu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Grain boundary diffusion and mechanisms of creep of nanostructured metals
YR Kolobov et al.
INTERFACE SCIENCE (2002)
Paradox of strength and ductility in metals processed by severe plastic deformation
RZ Valiev et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Nanostructured materials: Basic concepts and microstructure
H Gleiter
ACTA MATERIALIA (2000)
Share Paper
