Related references
Note: Only part of the references are listed.A plug, print & play inkjet printing and impedance-based biosensing technology operating through a smartphone for clinical diagnostics
Giulio Rosati et al.
BIOSENSORS & BIOELECTRONICS (2022)
Sensing of L-methionine in biological samples through fully 3D-printed electrodes
Cristiane Kalinke et al.
ANALYTICA CHIMICA ACTA (2021)
Review-Recent Progress in the Diversity of Inkjet-Printed Flexible Sensor Structures in Biomedical Engineering Applications
Hanim Hussin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Classifications and Applications of Inkjet Printing Technology: A Review
Muhammad Ali Shah et al.
IEEE ACCESS (2021)
A review on acoustic droplet ejection technology and system
Qing Guo et al.
SOFT MATTER (2021)
Printed 3D Electrode Arrays with Micrometer-Scale Lateral Resolution for Extracellular Recording of Action Potentials
Leroy Grob et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Additive Manufacturing of Batteries
Yaokun Pang et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Inkjet-printed paper-based semiconducting substrates for surface-enhanced Raman spectroscopy
Leilei Lan et al.
NANOTECHNOLOGY (2020)
Inkjet Printable Polydimethylsiloxane for All-Inkjet-Printed Multilayered Soft Electrical Applications
Riikka Mikkonen et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Fabrication and SERS performance of silver nanoarrays by inkjet printing silver nanoparticles ink on the gratings of compact disc recordable
Ling Li et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2020)
Silver nanoparticle conductive inks: synthesis, characterization, and fabrication of inkjet-printed flexible electrodes
Iara J. Fernandes et al.
SCIENTIFIC REPORTS (2020)
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Rafael M. Cardoso et al.
ANALYTICA CHIMICA ACTA (2020)
Ceramic pigments and dyes beyond the inkjet revolution: From technological requirements to constraints in colorant design
C. Molinari et al.
CERAMICS INTERNATIONAL (2020)
Inkjet printed silver nanoparticles on hydrophobic papers for efficient detection of thiram
Junli Duan et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2020)
Ultrasensitive inkjet-printed based SERS sensor combining a high-performance gold nanosphere ink and hydrophobic paper
N. Godoy et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Inkjet 3D printed modular microfluidic chips for on-chip gel electrophoresis
Rafal Walczak et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Enhanced performance of 3D printed graphene electrodes after electrochemical pre-treatment: Role of exposed graphene sheets
Pamyla L. dos Santos et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Inkjet Printing Functionalization of SOFC LSCF Cathodes
Eleonora Venezia et al.
NANOMATERIALS (2019)
Inkjet-Printed Carbon Nanotube Electrodes for Measuring Pyocyanin and Uric Acid in a Wound Fluid Simulant and Culture Media
Romana Jarosova et al.
ANALYTICAL CHEMISTRY (2019)
Inkjet printed microfluidic paper-based analytical device (PAD) for glucose colorimetric detection in artificial urine
Han Zhang et al.
BIOMEDICAL MICRODEVICES (2019)
A review of cellulose-based substrates for SERS: fundamentals, design principles, applications
Segun A. Ogundare et al.
CELLULOSE (2019)
Fully Printed μ-Needle Electrode Array from Conductive Polymer Ink for Bioelectronic Applications
Sabine Zips et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
An anti-HCT-interference glucose sensor based on a fiber paper-based screen-printed carbon electrode
XinXin He et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Printable Fabrication of a Fully Integrated and Self-Powered Sensor System on Plastic Substrates
Yuanjing Lin et al.
ADVANCED MATERIALS (2019)
A critical review of flexible and porous SERS sensors for analytical chemistry at the point-of-sample
Stephen M. Restaino et al.
ANALYTICA CHIMICA ACTA (2019)
State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
Cristian Mendes-Felipe et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Inkjet-printed PEDOT:PSS multi-electrode arrays for low-cost in vitro electrophysiology
Leonardo D. Garma et al.
LAB ON A CHIP (2019)
Inkjet-printed micro-calibration standards for ultraquantitative Raman spectral cytometry
Vernon LaLone et al.
ANALYST (2019)
Improving quantitative control and homogeneous distribution of samples on paper-based analytical devices via drop-on-demand inkjet printing
Meng-Meng Liu et al.
ANALYST (2019)
Ink-based 3D printing technologies for graphene-based materials: a review
Jingfeng Wang et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
A review on inkjet printing of nanoparticle inks for flexible electronics
Laxmidhar Nayak et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Microfluidic Lateral Flow Cytochrome P450 Assay on a Novel Printed Functionalized Calcium Carbonate-Based Platform for Rapid Screening of Human Xenobiotic Metabolism
Eveliina Jutila et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Simplified determination of complex stoichiometry for colorimetric metal indicators by inkjet printing
Kento Kuwahara et al.
ANALYST (2018)
Water-based alkyl ketene dimer ink for user-friendly patterning in paper microfluidics
Nurul Nadiah Hamidon et al.
ANALYTICA CHIMICA ACTA (2018)
Inkjet Printing Based Droplet Generation for Integrated Online Digital Polymerase Chain Reaction
Weifei Zhang et al.
ANALYTICAL CHEMISTRY (2018)
Printed Colorimetric Arrays for the Identification and Quantification of Acids and Bases
Michael J. Kangas et al.
ANALYTICAL CHEMISTRY (2018)
Inkjet printing Ag nanoparticles for SERS hot spots
Carmelo Micciche et al.
ANALYTICAL METHODS (2018)
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jinah Jang et al.
BIOMATERIALS (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Low Cost Inkjet Fabrication of Glucose Electrochemical Sensors Based on Copper Oxide
R. Bernasconi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Combining solvents and surfactants for inkjet printing PEDOT:PSS on P3HT/PCBM in organic solar cells
Sander Kommeren et al.
ORGANIC ELECTRONICS (2018)
Inkjet 3D printed chip for capillary gel electrophoresis
Rafal Walczak et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Peptide substrate-based inkjet printing high-throughput MMP-9 anticancer assay using fluorescence resonance energy transfer (FRET)
Jungmi Lee et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Quantitative analysis of drug distribution by ambient mass spectrometry imaging method with signal extinction normalization strategy and inkjet-printing technology
Zhigang Luo et al.
TALANTA (2018)
Accessing individual 75-micron diameter nozzles of a desktop inkjet printer to dispense picoliter droplets on demand
Rick Waasdorp et al.
RSC ADVANCES (2018)
Inkjet printing metals on flexible materials for plastic and paper electronics
N. C. Raut et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
On-Demand Laser Printing of Picoliter-Sized, Highly Viscous, Adhesive Fluids: Beyond Inkjet Limitations
Marina Makrygianni et al.
ADVANCED MATERIALS INTERFACES (2018)
Office Chromatography: Miniaturized All-in-One Open-Source System for Planar Chromatography
Dimitri Fichou et al.
ANALYTICAL CHEMISTRY (2018)
A review on flexible gas sensors: From materials to devices
Rouba Alrammouz et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
Modeling thermal inkjet and cell printing process using modified pseudopotential and thermal lattice Boltzmann methods
Salman Sohrabi et al.
PHYSICAL REVIEW E (2018)
Progresses of Preparation and Applications of Paper-Based Surface-Enhanced Raman Scattering Substrate
Yang Yue et al.
CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG (2018)
3D printing of tablets using inkjet with UV photoinitiation
Elizabeth A. Clark et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
A wearable tracking device inkjet-printed on textile
Bauyrzhan Krykpayev et al.
MICROELECTRONICS JOURNAL (2017)
Multifunctional, inexpensive, and reusable nanoparticle-printed biochip for cell manipulation and diagnosis
Rahim Esfandyarpour et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Inkjet automated single cells and matrices printing system for matrix assisted laser desorption/ionization mass spectrometry
Akihito Korenaga et al.
TALANTA (2017)
A Wearable Hydration Sensor with Conformal Nanowire Electrodes
Shanshan Yao et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D reactive inkjet printing of polydimethylsiloxane
Craig Sturgess et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
3D Inkjet Printing of Electronics Using UV Conversion
Ehab Saleh et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Development of MAST: A Microscopy-Based Antimicrobial Susceptibility Testing Platform
Kenneth P. Smith et al.
SLAS TECHNOLOGY (2017)
Freeform micropatterning of living cells into cell culture medium using direct inkjet printing
Ju An Park et al.
SCIENTIFIC REPORTS (2017)
Vertical-flow paper SERS system for therapeutic drug monitoring of flucytosine in serum
Adam G. Berger et al.
ANALYTICA CHIMICA ACTA (2017)
A review on inkjet printing of CNT composites for smart applications
Saeideh Kholghi Eshkalak et al.
APPLIED MATERIALS TODAY (2017)
Inkjet Printing Based Separation of Mammalian Cells by Capillary Electrophoresis
Weifei Zhang et al.
ANALYTICAL CHEMISTRY (2017)
All-inkjet-printed gold microelectrode arrays for extracellular recording of action potentials
Bernd Bachmann et al.
FLEXIBLE AND PRINTED ELECTRONICS (2017)
Re-thinking surface enhance Raman spectroscopy (SERS) sensors with a systems perspective
Ian M. White
FRONTIERS IN BIOLOGICAL DETECTION: FROM NANOSENSORS TO SYSTEMS IX (2017)
Printed microfluidic filter for heparinized blood
Stanley E. R. Bilatto et al.
BIOMICROFLUIDICS (2017)
Inkjet-Printing Enzyme Inhibitory Assay Based on Determination of Ejection Volume
Jungmi Lee et al.
ANALYTICAL CHEMISTRY (2017)
Fabrication of Transparent Multilayer Circuits by Inkjet Printing
Jieke Jiang et al.
ADVANCED MATERIALS (2016)
A novel approach for precisely controlled multiple cell patterning in microfluidic chips by inkjet printing and the detection of drug metabolism and diffusion
Jie Zhang et al.
ANALYST (2016)
Multigrid MALDI mass spectrometry imaging (mMALDI MSI)
Annett Urbanek et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2016)
Cancer Diagnostics via Ultrasensitive Multiplexed Detection of Parathyroid Hormone-Related Peptides with a Microfluidic Immunoarray
Brunah A. Otieno et al.
ANALYTICAL CHEMISTRY (2016)
Single-Cell Analysis Using Drop-on-Demand Inkjet Printing and Probe Electrospray Ionization Mass Spectrometry
Fengming Chen et al.
ANALYTICAL CHEMISTRY (2016)
Detection and identification of sugar alcohol sweeteners by ion mobility spectrometry
Christopher A. Browne et al.
ANALYTICAL METHODS (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
An inkjet printed, roll-coated digital microfluidic device for inexpensive, miniaturized diagnostic assays
Christopher Dixon et al.
LAB ON A CHIP (2016)
Paper-based sensors and assays: a success of the engineering design and the convergence of knowledge areas
Adaris M. Lopez-Marzo et al.
LAB ON A CHIP (2016)
Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
E. M. Hamad et al.
LAB ON A CHIP (2016)
Chromatic analysis by monitoring unmodified silver nanoparticles reduction on double layer microfluidic paper-based analytical devices for selective and sensitive determination of mercury(II)
Rattapol Meelapsom et al.
TALANTA (2016)
Rapid and alternative fabrication method for microfluidic paper based analytical devices
Soheil Malekghasemi et al.
TALANTA (2016)
Feasibility of Bioprinting with a Modified Desktop 3D Printer
Todd A. Goldstein et al.
TISSUE ENGINEERING PART C-METHODS (2016)
Inkjet printing of silver rainbow colloids for SERS chips with polychromatic sensitivity
K. E. Yorov et al.
RSC ADVANCES (2016)
Emerging Progress of Inkjet Technology in Printing Optical Materials
Lei Wu et al.
ADVANCED OPTICAL MATERIALS (2016)
Inkjet Printing of Viscous Monodisperse Microdroplets by Laser-Induced Flow Focusing
Paul Delrot et al.
PHYSICAL REVIEW APPLIED (2016)
A Disposable paper breathalyzer with an alcohol sensing organic electrochemical transistor
Eloise Bihar et al.
SCIENTIFIC REPORTS (2016)
Inkjet-Print Micromagnet Array on Glass Slides for Immunomagnetic Enrichment of Circulating Tumor Cells
Peng Chen et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
The internet of things in healthcare: An overview
Yuehong Yin et al.
JOURNAL OF INDUSTRIAL INFORMATION INTEGRATION (2016)
Multienzyme Inkjet Printed 2D Arrays
Efrat Gdor et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Test Sample for the Spatially Resolved Quantification of Illicit Drugs on Fingerprints Using Imaging Mass Spectrometry
Shin Muramoto et al.
ANALYTICAL CHEMISTRY (2015)
Single-cell PCR of genomic DNA enabled by automated single-cell printing for cell isolation
F. Stumpf et al.
BIOSENSORS & BIOELECTRONICS (2015)
Combining Inkjet Printing and Sol-Gel Chemistry for Making pH-Sensitive Surfaces
Gianni Orsi et al.
CURRENT TOPICS IN MEDICINAL CHEMISTRY (2015)
Editorial on Miniaturized planar chromatography using office peripherals - Office chromatography by Gertrud E. Morlock
Colin F. Poole
JOURNAL OF CHROMATOGRAPHY A (2015)
Inkjet-Printed Gold Nanoparticle Surfaces for the Detection of Low Molecular Weight Biomolecules by Laser Desorption/Ionization Mass Spectrometry
Alyssa L. M. Marsico et al.
JOURNAL OF THE AMERICAN SOCIETY FOR MASS SPECTROMETRY (2015)
Fast electrically assisted regeneration of on-chip SERS substrates
T. -A. Meier et al.
LAB ON A CHIP (2015)
Multiplexed paper analytical device for quantification of metals using distance-based detection
David M. Cate et al.
LAB ON A CHIP (2015)
Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing
Jia Li et al.
LAB ON A CHIP (2015)
Application of gold thin-films for internal standardization in LA-ICP-MS imaging experiments
Maximilian Bonta et al.
ANALYST (2014)
USB-driven microfluidic chips on printed circuit boards
Jiang Li et al.
LAB ON A CHIP (2014)
New Approach to a Practical Quartz Crystal Microbalance Sensor Utilizing an Inkjet Printing System
Yusuke Fuchiwaki et al.
SENSORS (2014)
SERS active silver nanoparticles synthesized by inkjet printing on mesoporous silicon
Chiara Novara et al.
NANOSCALE RESEARCH LETTERS (2014)
Velocity Profile inside Piezoacoustic Inkjet Droplets in Flight: Comparison between Experiment and Numerical Simulation
Arjan van der Bos et al.
PHYSICAL REVIEW APPLIED (2014)
Enhancing peptide molecular imaging by depositing ice in time-of-flight secondary ion mass spectrometry
Naofumi Aoki et al.
INTERNATIONAL JOURNAL OF MASS SPECTROMETRY (2013)
Layer-by-layer inkjet printing of fabricating reduced graphene-polyoxometalate composite film for chemical sensors
Hui Zhang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)
Application of inkjet printing technique for biological material delivery and antimicrobial assays
Qiang Zheng et al.
ANALYTICAL BIOCHEMISTRY (2011)
Inkjet-like printing of single-cells
Azmi Yusof et al.
LAB ON A CHIP (2011)
Quantitative biomarker assay with microfluidic paper-based analytical devices
Xu Li et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Inkjet printing of polymers: State of the art and future developments
BJ de Gans et al.
ADVANCED MATERIALS (2004)
Share Paper
