Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Nuoya Li et al.
Summary: Utilizing sunlight to convert CO2 into chemical fuels can address the greenhouse effect and fossil fuel crisis. This study designed and prepared a composite material based on ZnSe and CsSnCl3, which can enhance the photocatalytic activity for CO2 reduction and contribute to the development of metal halide perovskite photocatalysts.
Article
Chemistry, Multidisciplinary
Jishi Wei et al.
Summary: Controlled incorporation of single atoms in a suitable host matrix can lead to a significant transformation in catalytic properties, but finding an appropriate synthetic strategy remains a major challenge. This study reports on the spontaneous heteroatom formation of atomic Zn sites in well-defined wurtzite CoO nanorods, which exhibit high photoreduction rates.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Kui Chen et al.
Summary: The ultrathin CoO layer containing Zn-dopants and O-vacancies (V-o-Zn-CoO) enhances CO2 photoreduction efficiency and CH4 selectivity, demonstrating promising durable photocatalytic performance with the strategy of metal atoms synergistic O-vacancies.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Physical
Wenyan Wang et al.
Summary: The study presents a facile method to fabricate metalated porous polycarbazoles for high-selectivity photocatalytic conversion of CO2 to CO under visible light irradiation. The high porosity of the material enhances CO2 adsorption, while the incorporated metals play a crucial role in CO2 activation.
Article
Chemistry, Multidisciplinary
Meng Lu et al.
Summary: This study presents a versatile strategy for achieving a uniform dispersion of polyoxometalates (POMs) in covalent organic frameworks (COFs). The resulting COF-POM composites exhibit outstanding catalytic activity in artificial photosynthesis.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Review
Chemistry, Multidisciplinary
Zhe-xu Bi et al.
Summary: Converting CO2 to renewable fuels or valuable carbon compounds through photocatalytic reduction is an energy-saving and environmentally friendly method, and layered double hydroxide (LDH) has attracted significant attention as a two-dimensional material in this field. This review provides an overview of the research progress of LDH in the photocatalytic reduction of CO2 from different perspectives and presents the development prospects.
Article
Chemistry, Multidisciplinary
Qian Liu et al.
Summary: The study demonstrates a strategy for spatial separation of redox cocatalysts on various semiconductors through a unique stacked photocatalyst design, showing superior activity and stability. This smart design helps mitigate charge recombination, provide highly active and selective sites, and protect semiconductors from photocorrosion.
Article
Chemistry, Physical
Xingwei Zhang et al.
Summary: The fabrication of semiconductor heterojunctions into hollow nanostructures can enhance the photocatalytic performance, but also faces challenges. In this study, a stacking design of semiconductor heterojunctions on hollow carbon spheres is reported, which significantly improves the photocatalytic activity in CO2-to-CO conversion. The design utilizes the advantages of hollow carbon, such as improved light harvesting, promoted charge separation, increased CO2 adsorption, and protected CdS from photocorrosion. The design can be extended to other semiconductor heterojunctions.
Article
Chemistry, Physical
Lang He et al.
Summary: A facile method was used to fabricate 3D nitrogen-doped graphitic carbons with embedded core-shell nanoparticles. These materials showed excellent photocatalytic activity and could be used for the design and synthesis of high-efficiency core-shell photocatalysts.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Multidisciplinary
Jiakang You et al.
Summary: Cocatalysts loading with non-noble metal compounds is an effective strategy for enhancing photocatalytic CO2 reduction. The choice of anions in these cocatalysts plays a significant role in influencing the reaction. These materials improve charge carrier separation, light absorption, CO2 adsorption, and serve as active sites for reduction reactions.
JOURNAL OF CO2 UTILIZATION
(2022)
Article
Chemistry, Physical
Hui Li et al.
Summary: This study developed a magneto-electrodeposition technique to fabricate ideal cathode materials for flexible hybrid supercapacitors with outstanding electrochemical performance. The loading mass and exposure of active sites were significantly increased through the magneto-hydrodynamic effect induced by magnetic-electric field coupling, and a 3D cross-linked nest-like microstructure was constructed.
Article
Chemistry, Multidisciplinary
Fengliang Wang et al.
Summary: This work presents an in situ topological transformation strategy to enhance the efficiency of CO2 photocatalytic conversion by integrating uniform Co-based species into multishelled superstructures. The study finds that the ultrathin nanosheet assembled ZnCo bimetallic hydroxide exhibits high photocatalytic efficiency for CO2 reduction.
Article
Chemistry, Multidisciplinary
Heng Zhao et al.
Summary: In this study, a hierarchically two-dimensional (2D) meso-microporous perovskite nanosheet-constructed 3DOM CaTiO3 photocatalyst is designed and fabricated to significantly reduce the grain boundaries and enhance photocatalytic activity for hydrogen generation. The use of carbon quantum dots as a metal-free co-catalyst results in outstanding hydrogen generation performance under monochromatic light.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Physical
Min Yang et al.
Summary: This article investigates the ultratight heterojunctions formed by NiAl-LDH/g-C3N4 nanosheets, which exhibit remarkable CO production rate under visible light irradiation, surpassing the conventional CO2 photocatalytic reduction efficiency. The unique structure promotes the transport and separation of carriers, providing new insights for designing photocatalysts with ideal CO2 reduction performance.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Article
Engineering, Environmental
Wen-Wen Dong et al.
Summary: In this study, metal organic framework (MOF) hybrid composites were prepared using a simple method, and photocatalytic CO2 reduction driven by visible light was achieved at the solid-gas interface, exhibiting excellent selective CO production and high yield.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Qiang Huang et al.
Summary: The photocatalytic conversion of CO2 to value-added chemicals and fuels using Au-Pt/Cu2O/ReS2 as the catalyst demonstrated high efficiency and controllable selectivity. The unique heterostructure and synergy between Au and Pt contributed to the improved performance, with a significantly higher electron reduction rate and easy tunability of CO and CH4 selectivity. This study provides novel insights for the design of practical photocatalysts for efficient CO2 photoconversion.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Jiafu Qu et al.
Summary: A Z-scheme BiVO4/NiCo2O4 heterojunction system was designed in this study, which reduced the energy barrier and improved the oxidation ability of BiVO4, leading to efficient separation and transfer of photogenerated carriers. The photocatalyst exhibited excellent O-2 evolution performance and improved efficiency compared to pristine BiVO4, showing great potential for efficient photocatalytic O-2 evolution and providing fundamental insights for the design of efficient water oxidation heterojunctions.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2022)
Article
Chemistry, Physical
Mingliang Hu et al.
Summary: In this study, an ultra-thin two-dimensional trimetallic metal-organic framework nanosheet was successfully synthesized and used as a photocatalyst for CO2 reduction. The nanosheet exhibited high catalytic activity and selectivity, and Zr and Cu doping were found to enhance its performance.
Article
Chemistry, Multidisciplinary
Nitin B. Mhamane et al.
Summary: This study demonstrates the sustainable catalytic conversion of CO2 on In2O3 with near 100% selectivity towards CO, using a lower amount of hydrogen. The optimal CO2:H-2 ratio and reaction temperature can achieve exclusive CO selectivity and minimize the expensive H-2 in the reactant feed.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Energy & Fuels
Zhongliao Wang et al.
Summary: The study demonstrates enhanced CO2 photoreduction activity through an S-scheme BiOBr/NiO heterojunction, showcasing improved understanding of the mechanism through integration of in situ monitoring techniques with density functional theory calculation.
Article
Chemistry, Physical
Xiang-yin Ji et al.
Summary: Reducing CO2 to hydrocarbons through photocatalysis is a promising method for achieving carbon-neutral, but developing efficient photocatalysts remains a challenge. In this study, researchers constructed a defective Cu2-xS/Ni-Al-LDH heterojunction photocatalyst, which showed excellent CO2 photoreduction performance in both the full-spectrum and near-infrared regions. The enhanced performance was attributed to the fabricated p-n heterojunction between Cu2-xS and LDH, which inhibited electron-hole recombination and improved reaction kinetics.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Yanhui Su et al.
Summary: This study successfully developed a new type of nanocatalyst that can efficiently convert CO2 to CO under visible light, with high efficiency and selectivity. Through structural control in aspects such as light reflection and scattering, electron transfer, surface oxygen vacancies, and energy flow, the study achieved a significantly improved light-harvesting efficiency.
Article
Energy & Fuels
Azmat Ali Khan et al.
Summary: The study developed a highly active ternary CoAlLa-LDH semiconductor for photocatalytic reduction by enhancing coordinatively unsaturated metal centers through La3+ doping. The optimized Co/Al/La molar ratios led to a promising photocatalyst with high activity in CO2 reduction to CO and CH4, with good stability and selectivity for CH4. The incorporation of lanthanum into the LDH framework demonstrated remarkable performance in developing a new photocatalyst for CO2 reduction.
Article
Chemistry, Physical
Sudarshan Vijay et al.
Summary: The study investigates the activity of transition metals, metal-nitrogen-doped carbon catalysts, and supported phthalocyanine in the CO2 electroreduction to CO, and presents a unified mechanistic picture. It is found that MNCs have similar electron transfer properties to TMs in CO2 conversion, but can be limited by either CO2 star adsorption or proton-electron transfer reactions. The increased activity of MNC catalysts is attributed to the stabilization of larger adsorbate dipoles due to their discrete and narrow d states.
Article
Chemistry, Multidisciplinary
Fengliang Wang et al.
Summary: Solar-driven photocatalytic CO2 reduction is a promising approach for addressing the energy crisis and CO2 pollution. A newly developed photocatalyst shows high efficiency in CO2 reduction and introduces an amines oxidation reaction to further enhance the process.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Lizhen Liu et al.
Summary: The study combined corona poling and surface I-grafting to enhance charge separation and CO2 affinity of Bi4Ti3O12, resulting in a significant increase in CO production rate. The synergistic effect of ferroelectric polarization and surface ion grafting promotes CO2 photoreduction efficiently.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Physical
Jun Zhang et al.
Summary: This study successfully synthesized Co(OH)(2)/g-C3N4/Ni(OH)(2) 2D layered photocatalysts with high photocatalytic performance, achieving a high H-2 production rate. The composite exhibits higher activity compared to samples only coupled with Co(OH)(2) and Ni(OH)(2), and even outperforms the optimized Pt-g-C3N4 sample.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Kui Chen et al.
Summary: This study investigates the influence of O-vacancies and Fe dopants on the photocatalytic performance of CO2 using well-designed CoO single-unit-cell layers. Optimizing Fe dopants and O vacancies can enhance the CO2 photoreduction efficiency and product selectivity.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Multidisciplinary
Shujie Liang et al.
Summary: This study successfully constructed lattice-strained nickel hydroxide nanosheets for the photoreduction of diluted CO2, showing higher CO production yield and selectivity. The findings provide a foundation for further research in the field of photocatalysis and other applications.
ENVIRONMENTAL SCIENCE-NANO
(2021)
Article
Chemistry, Inorganic & Nuclear
Yuyan Xu et al.
Summary: The Co(OH)(2)/CdS photocatalyst, prepared through a solvothermal and co-precipitation method, shows enhanced CO2 reduction activity with high light absorption, efficient charge separation, and complete CO product selectivity. The integration of Co(OH)(2) cocatalyst offers a new pathway for constructing cost-effective photocatalytic materials to achieve highly efficient CO2 reduction activity.
DALTON TRANSACTIONS
(2021)
Article
Chemistry, Inorganic & Nuclear
Jiamin An et al.
Summary: By utilizing defect engineering and morphology regulation, a novel hollow nanocage morphology was successfully created in NiCo-LDH, leading to improved CO2 photoreduction performance. The HC-NiCo-LDH catalyst demonstrated enhanced CH4 selectivity and suppressed H-2 evolution as compared to the defect-free bulk counterparts. This work provides valuable insights into the role of defects in improving the activity and selectivity of the photocatalytic CO2 reduction process.
INORGANIC CHEMISTRY FRONTIERS
(2021)
Review
Chemistry, Physical
Shuobo Wang et al.
Summary: This article provides a timely and comprehensive review focusing on recent advances in the design strategies for photocatalytic CO2 conversion. It emphasizes the importance of key parameters in tailoring the size, morphology, bandgap, and other properties of photocatalysts to improve CO2 conversion efficiency and selectivity. New trends and strategies in structural design to meet the demands for prominent CO2 photoreduction activity are also introduced, offering a comprehensive guideline for designing state-of-the-art photocatalysts with well-defined structures for CO2 conversion.
Article
Chemistry, Physical
Qiaoqiao Mu et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2020)
Article
Nanoscience & Nanotechnology
Yu Kuang et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Article
Chemistry, Multidisciplinary
Fang Chen et al.
ADVANCED MATERIALS
(2020)
Article
Engineering, Chemical
Xiaojie Hao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
(2020)
Article
Chemistry, Multidisciplinary
Xiaoxiao Yu et al.
Article
Multidisciplinary Sciences
Kang-Qiang Lu et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Yanlin Wang et al.
APPLIED SURFACE SCIENCE
(2019)
Article
Chemistry, Physical
Hui Mao et al.
APPLIED SURFACE SCIENCE
(2019)
Article
Environmental Sciences
Zhimin Sun et al.
ENVIRONMENT INTERNATIONAL
(2019)
Review
Chemistry, Physical
Amirhossein Hasani et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Physical
Jingxiang Low et al.
JOURNAL OF CATALYSIS
(2018)
Article
Chemistry, Physical
Kefu Wang et al.
CATALYSIS SCIENCE & TECHNOLOGY
(2018)
Article
Chemistry, Physical
Kyeong Min Cho et al.
Article
Nanoscience & Nanotechnology
Zhiyong Mao et al.
ACS APPLIED MATERIALS & INTERFACES
(2017)
